RCom Flashcards
(Refer to FAA-CT-8080-2H, Figure 25, Area 3.) If Dallas Executive Tower is not in operation, which frequency should be used as a Common Traffic Advisory Frequency (CTAF) to monitor airport traffic?
1 126.35 MHz.
2 127.25 MHz.
3 122.95 MHz.
127.25 MHz.
(Refer to FAA-CT-8080-2H, Figure 25, Area 2.) The control tower frequency for Addison Airport is
1 133.4 MHz.
2 122.95 MHz.
3 126.0 MHz.
126.0 MHz.
(Refer to FAA-CT-8080-2H, Figure 22, Area 2.) At Coeur D’Alene which frequency should be used as a Common Traffic Advisory Frequency (CTAF) to monitor airport traffic?
1 135.075 MHz.
2 122.8 MHz.
3 122.05 MHz.
122.8 MHz.
(Refer to FAA-CT-8080-2H, Figure 21, Area 2.) The CTAF/MULTICOM frequency for Garrison Airport is (Area 2)
1 122.9 MHz.
2 122.8 MHz.
3 123.0 MHz.
122.9 MHz.
(Refer to FAA-CT-8080-2H, Figure 26, Area 4.) The CTAF/UNICOM frequency at Jamestown Airport is
1 123.0 MHz.
2 122.2 MHz.
3 123.6 MHz.
123.0 MHz.
(Refer to FAA-CT-8080-2H, Figure 26, Area 5.) What is the CTAF/UNICOM frequency at Barnes County Airport?
1 122.8 MHz.
2 122.2 MHz.
3 123.6 MHz.
122.8 MHz.
As standard operating practice, all inbound traffic to an airport without a control tower should continuously monitor the appropriate facility from a distance of
1 25 miles.
2 20 miles.
3 10 miles.
10 miles.
The correct method of stating 4,500 feet MSL to ATC is
1 FORTY-FIVE HUNDRED FEET MSL.
2 FOUR THOUSAND FIVE HUNDRED.
3 FOUR POINT FIVE.
FOUR THOUSAND FIVE HUNDRED
If you are flying near an untowered airport with no CTAF, how would you keep track of local traffic?
1 121.5 MHz.
2 Flight Watch on 122.0 MHz
3 MULTICOM 122.9 MHz.
MULTICOM 122.9 MHz.
The correct method of stating 10,500 feet MSL to ATC is
1 ONE ZERO THOUSAND, FIVE HUNDRED.
2 TEN POINT FIVE.
3 TEN THOUSAND, FIVE HUNDRED FEET.
ONE ZERO THOUSAND, FIVE HUNDRED.
