Pumping

Question 1

Pump Recirculating Line Valve:

When opened, water from the discharge side of the pump is sent to the water tank through a __ line.

Answer 1

1⁄2”

Question 2

Auxiliary Engine Cooler Control:
Directs pump water to a heat exchanger where ___ circulates through, thus
lowering engine coolant temperature. Use during engine overheat situation.

Answer 2

engine coolant

Question 3

Manual Cab Tilt Hand Pump :

Used to manually tilt the cab. Jack handle is located behind the ____

Answer 3

driver’s seat.

Question 4

Manual Pump Shift Procedure:

1. Set maxi-brake.
2. Shift transmission to N (Neutral).
3. Move cab pump shift lever to the ____.
4. Shut down engine.

Answer 4

center position

Question 5

Manual Pump Shift Procedure:

5. Pull ___ (located on right side pump panel).
6. Start engine.
7. Place the emergency override switch (right of steering column) in the “____” position.
8. Shift transmission into D (Drive).

Answer 5

manual pump shift override handle /

ON

Question 6

If the pump is operating at a high lift, or pumping a large amount of water, using the ___ position may be necessary to avoid cavitation.

Answer 6

VOLUME

Question 7

The transfer valve may be changed from one position to the other while operating the pump. Slow the engine speed to reduce the discharge pressure to ___ or less.

Answer 7

75 psi

Question 8

Discharge pressure must be at least ___ greater than intake pressure in order for the relief valve to operate properly.

Answer 8

50 psi

Question 9

OPERATING RANGE OF RELIEF VALVE IS BETWEEN ____ PSI.

Answer 9

70 AND 300