Maintenance

Question 1

KME Cab full tilt height:

Answer 1

15’ 2”

Question 2

Operate the hand pump and lift the cab to the full tilt position. The pump may need
to be cycled ___ strokes before the cab begins to lift.

Answer 2

20 or more

Question 3

Lower cab for an additional ___ after it makes contact with the chassis.

Answer 3

5 seconds

Question 4

When the pads are new, the floating pin will be exposed approximately _____.

Answer 4

3⁄4”to 1”.

Question 5

When the pin is sticking out ___, the pads are worn to replacement condition.

Answer 5

1⁄4”

Question 6

A Cold Check may be made when the fluid temperature is ___

Answer 6

60ºF – 120ºF

Question 7

Perform a Hot Check at the first opportunity after normal operating temperature (___) is reached.

Answer 7

160ºF – 200ºF

Question 8

The alternator is a Niehoff ___ and is of the self-energizing type.

Answer 8

400 amp

Question 9

Check pressures by gauge (___ front, ___-psi rear).

Answer 9

115-psi / 85

Question 10

Priming pump fluid

Answer 10

Oil less primer

Question 11

Steering box

Have an assistant move the steering wheel back and forth with short (____) rapid movements.

Answer 11

40 to 60

Question 12

F377
Dry Vacuum Test
This should be at least 20” of vacuum. Stop priming pump and note amount of vacuum. (Should not drop more than____).

Answer 12

10 in. Hg in 5 minutes