Foam Pro

Question 1

The system is capable of proportioning foam between ____.

Answer 1

0.1% to 3.0%

Question 2

0.2%

Answer 2

1300 GPM

Question 3

0.5%

Answer 3

520 GPM

Question 4

1.0%

Answer 4

260 GPM

Question 5

3.0%

Answer 5

85 GPM

Question 6

The maximum operating pressure of the Foam Pro Model 2001 Foam System is ____.

Answer 6

400 psi

Question 7

The minimum GPM flow needed to operate the Foam Pro System is ____.

Answer 7

30 gpm.

Question 8

If the tank is empty, the pump will not run for more than ____. A low foam concentrate tank level is denoted by “Lo Con” blinking on the display.

Answer 8

2 minutes

Question 9

Motor stall protection is provided. In the event that the pump motor will not run or stalls for ____, the display will show “ERR.EL” to indicate that the pump is producing no feedback to the control signal.

Answer 9

10 seconds

Question 10

When the fire pump is running, the foam pump cannot pump air efficiently against ____ backpressure.

Answer 10

100 to 150 psi

Question 11

The system comes with a foam pump/motor assembly, a refill wand with ____ , and a side-mount level indicator switch.

Answer 11

6 feet of 1” ID suction hose

Question 12

Automatic Refill Operation
6. The pump will run for ___ and then shut down if no flow is detected by the flow switch. After ___, the pump will shut down
immediately after no flow is detected.

Answer 12

20 seconds