PREVENTIVE MAINTENANCE Flashcards
Pages 1-8
Preventive Maintenance
All members of the company shall assist the engineer in the proper care, cleaning, and up keep, as assigned by:
When any JFRD equipment is noted as being lost, found, stolen, or damaged in any way, notify the:
The company officer
The company officer immediately
Preventive Maintenance
Each discrepancy shall be recorded in the ___ ___ ___ ___, located in the JFRD ___
*First click on Tactical Support tab, then Daily Apparatus Management. *
Daily Apparatus Check Off
Portal
Daily Engine Inspection
Booster tank and foam levels must be checked by:
visual observation into the tank/ compare visual levels to gauges for accuracy
Daily Engine Inspection
Ensure proper air brake pressure both front and rear ______, and proper operation of brakes.
> 100 PSI
Daily Engine Inspection
Tires and wheels- check tire____, ____ nuts, axle ___, and ___ depth.
Minimum tread depth is ____ or when ____ ____ indicators are even with tire tread
Tire pressure
Lug nuts
Axle seals
Tread depth
4/32”
Tread wear
Daily Equipment Inspection
Portable oxygen - ensure tank pressure is _____ and oxygen delivery adjuncts are properly stocked.
> 1000 PSI
Daily Equipment Inspection
Air chisel - connect to air bottle and ensure proper operation ( bottle pressure _____ ). Do not trigger the air chisel unless the chisel head is in contact with a ____ ____.
> 4000 PSI
Solid material
Daily Equipment Inspection
Hydraulic pump and tools (if equipped) - check ___, ___, and ___ fluid levels.
Store hydraulic spreaders with ____ between the tips
gas, oil, and hydraulic fluid levels
1/2 gap
Daily Equipment Inspection
Generator (if equipped)- check ___, and ___ levels, run generator until fully warmed up
oil, coolant
approximately 5 minutes
Weekly Pump Service
Inspect the steamer intake strainers. These function as an _____ , protecting the pump housing from _____. It is normal for the strainer to _____ with regular use. If the deterioration becomes excessive TSF will provide a replacement. The strainer must also fit ___ within the steamer pipe to work properly.
Anode
Rust
Oxidize
Tight
Weekly Equipment Checks
Clean air tools with soapy water and dry thoroughly lubricate each blade with light oil. Apply ______ of air tool oil into the ______ and operate
5 Drops
Blade end
Weekly Equipment Checks
Check portable extinguishers for proper _____ and annual inspection date. The inspection label indicates the date of the ______.
Charge
Last inspection
Scheduled and Unscheduled Maintenance
If the service was performed and the engine returned on the same shift, the following checks must be completed prior to returning to service:
- Visual verification that the booster tank is full
- Verify pump and governor operates properly ( in both modes)
- Verify proper brake pressure and brake operation
- Ensure all equipment is accounted for
Weekly Inspection and Maintenance
A more thorough inspection of the apparatus and all equipment shall be performed each _____. The following procedure shall be completed in addition to the daily inspection. Although each of the following steps may not need to be completed each week, use proper judgment to maintain your engine and pump. The ____ ____ shall establish a maintenance schedule.
Monday
company captain
