Power Tools

Question 1

What is the Angle Grinder USED for? (1)

Answer 1

Cutting through high-tensile locks and chains allowing access into properties and structures.

Question 2

What is the Cordless Impact Driver USED for? (1)

Answer 2

• Inserts and removes screws

Question 3

What is the Cordless Drill USED for? (2)

Answer 3

• Drill holes
• Remove tek-screws

Question 4

What is the CONSTRUCTION of an Angle Grinder? (5)

Answer 4

• Durable constructed metal housing
• Gearing system
• Guards
• Flanges
• Anti-vibration side handle

Question 5

What is the CONSTRUCTION of an Cordless Impact Driver & Cordless Drill? (2)

Answer 5

• Plastic and metal body
• Removable battery

Cordless Drill = side handle attachment provides extra stability for left/right-handed use

Question 6

How do you OPERATE an Angle Grinder? (5)

Answer 6

• Connect battery pack and check charge levels.
• Push lock-off switch forward then depress the paddle switch.
• Allow the angle grinder to run open to operating speed before applying it to cutting surfaces (limit the potential for grab and kickback)
• Release the paddle switch to stop
• Two-hand operation

Question 7

How do you OPERATE an Cordless Impact Driver & Cordless Drill? (4)

Answer 7

• Remove battery : push buttons, slide battery
• Insert battery: slide battery inwards
• Push control switch to alter direction of drill.
• Pull trigger to use drill → varied speed depending on trigger depth.

Cordless Impact Driver = Insert driver bit into chuck.Pull chuck to release driver bit.
Cordles Drill = Insert drill bit, tighten chuck

Question 8

How do you MAINTAIN the Power Tool(s)? (6)

Answer 8

• Visually check for excessive wear or damage.
• Remove the battery before cleaning → recharge or replace as required
• Clean all components thoroughly after each use
• Clean dust and debris from charger and tool ventilation slots
• Clean the housing with mild soap, a soft damp cloth and a non-metallic brush.
• Keep tool handles dry and clean – free from oil and grease

Question 9

What are the SAFETY considerations for the Angle Grinder? (6)

Answer 9

• Don appropriate PPE/PPC → including safety goggles or other eye protection
• 2 hand operation
• Don’t overload the tool
• Check the disc before operating
• Keeps hands clear
• Discard damaged discs

Question 10

What are the SAFETY considerations for the Cordless Impact Driver & Cordless Drill? (3)

Answer 10

• Don appropriate PPE/PPC → including safety goggles or other eye protection
• Always remove the battery pack before changing or removing accessories
• Never use flammable or combustible solvents around tools

Question 11

Where are the Power Tool(s) LOCATED?

Answer 11

Angle Grinder
MKV = NS Centre
Heavy = NS2

Cordless Impact Driver & Cordless Drill
Heavy = OS1