F.E.Ts

Question 1

What is Rabbit Tool USED for? (1)

Answer 1

Forcible Entry

Question 2

What is the FET USED for? (1)

Answer 2

Spread, cut and squeeze vehicle bonnets and boots, light structural steel and reinforcing steel.

Question 3

What is the CONSTRUCTION of the Rabbit Tool? (4)

Answer 3

• Hydraulic hand pump: manually operated
• Small ram: fitted with stainless steel jaws (4-tonne capacity)
• 1.8m rubber-coated high-pressure hose
• Accessories: rubber mallet and pry bar

Question 4

What is the CONSTRUCTION of the FET? (7)

Answer 4

• Lightweight metal construction
• Alloy carrying handle
• Spreading arms
• 28v lithium-ion battery
• Deadman’s handle
• Rubber bump stopper
• Hydraulic operation core

Question 5

How do you OPERATE a Rabbit Tool? (5)

Answer 5

1. Connect the high-pressure hose between the hydraulic hand pump and the ram
2. Insert the rabbit tool jaws between door and door jam
3. Turn the pump relief valve on = clockwise
4. Pump the handle continuously
5. Turn the pump relief off = anti-clockwise

Question 6

How do you OPERATE a FET? (4)

Answer 6

1. Clear work area & stable footing
2. Slide the battery pack in until it locks into position
3. Press the on/off switch (green LED will illuminate)
4. RIGHT to spread - LEFT to close/cut

Question 7

What is the MAINTAINENCE for the Rabbit Tool? (2)

Answer 7

• Clean thoroughly if exposed to water/grit
• Check for oil leaks

Question 8

What is the MAINTENANCE for the FET? (4)

Answer 8

• Recharge batteries as required
• Check spreading tips and cutting edges for damage
• Clean the tool with a soft, damp cloth and/or non-metallic brush
• Visually inspect the tool for any leaks and damage (do not use if there are)

Question 9

What is the SAFETY for the Rabbit Tool? (5)

Answer 9

• Don appropriate PPE (visor down)
• 2-person operation
• Do not allow the hose to kink, or meet toxic material, fire, or extreme heat
• The hose is not to be used to drag or lift the tool
• Be aware of the door “springing” open

Question 10

What is the SAFETY for the FET? (6)

Answer 10

• Don appropriate PPE (visor down)
• Keep hands and fingers clear
• Check Deadman’s handle is functioning
• Avoid twisting the tool
• Keep all personnel clear of tool
• Constantly check and observe your surroundings

Question 11

Where are the FET & Rabbit Tool LOCATED?

Answer 11

Rabbit Tool
MKV = NS Centre
Heavy = OS2

F.E.T.
MKV = Rear Lower