Poultry Dressing Plant Flashcards
The minimum floor slope shall be ________ and it shall slope uniformly from walls to the drain to avoid puddles or depressions.
2% - 4%
Intersection with the walls shall be rounded with _______ radius.
50 mm - 60 mm
At least __________ of the wall above the floor level shall be tiled or covered with other
impervious material. Joints between tiles shall be filled with solid mortar backing and
cement.
2 m
All wall tops and ledges shall slope at ________.
45 degree
(Walls) It shall be coved to the floor-wall and at wall-to-wall junctions with a radius of
_________.
50 mm - 60 mm
Ceilings shall be at least ______ from the floor.
2.4 m
All windows shall be properly installed with ________ screen
16-mesh
Window ledges shall be sloped about _______ to prevent the accumulation of dirt, water,
or debris.
45 degree
Windowsill shall be at least _______ from the finish floor line.
1 m
External doors shall be fitted with screens, air flaps or provided with air curtain. The width shall be at least ______.
1.8 m
Internal doors shall be fitted with self-closing and snug fitting double action doors with a glass (reinforced) panel at eye level or provided with plastic flaps. It shall be at least _______
wide.
1.5 m
Cold storage facilities shall have adequate capacity to maintain a temperature of ______ or less.
4 degree celcius
There shall be sufficient working tables with a tabletop made of stainless steel. Table
height shall be ______. The table footing should be designed to prevent the accumulation of dirt.
0.8 m
(LIGHTING) Holding area
100 lux
(LIGHTING) General
200 lux
(LIGHTING) Working table
500 lux
Convenience outlet shall be waterproof type and it shall be installed _________ high.
1 m - 1.5 m
One drainage inlet shall be provided for each 37 m2
of floor space.
150 mm - 200 mm
