POSITION AND WARNING SYSTEM Flashcards
The purpose of antiskid generators is to______.
measure wheel rotational speed and any speed changes.
An antiskid system is________.
an electrohydraulic System.
Antiskid braking systems are generally armed by_______.
switch in the cockpit.
In an antiskid system, wheel skid is detected by ______ .
an electrical sensor
When an airplane’s primary flight control surfaces are set for a particular
phase of flight, such as landing or takeoff, the corresponding control-surface
indicating system “will show
flap/slat position.
Where is the landing gear safety switch usually located?
On the main gear shock strut.
extension of a landing gear strut?
Ground safety switch.
When a landing gear safety switch on a main gear strut closes at liftoff,
which system is deactivated?
Antiskid system.
The basic difference between an autosyn and a magnesyn indicating
system is the_______ .
rotor.
Microswitches are used primarily as limit switches to_________.
control electrical units automatically.
