Part 2 Flashcards

1
Q

True or false:
The electrical contractor has carried out the electrical installations in a new office
building, the rated current of the overcurrent protector acting as a protective device is
63 A. In this case

commisioning inspection must be carried to the electrical equipment. STL

A

True

1135/2016 § 43

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

True or false:
The electrical contractor has carried out the electrical installations in a new office
building, the rated current of the overcurrent protector acting as a protective device is
63 A. In this case

  • A certification inspection must be performed on the electrical equipment before the equipment is used
    for its intended purpose.
A

False

STL 1135/2016 § 45: “In addition to the commissioning inspection, a certification inspection
shall also be performed on the electrical installation, if the installation belongs to category 1,
2 or 3. A certification inspection shall also be carried out on significant modification and
expansion work of electrical installations.”

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

True or false:
The electrical contractor has carried out the electrical installations in a new office
building, the rated current of the overcurrent protector acting as a protective device is
63 A. In this case

the person performing the certification inspection of the electrical equipment must attach an inspection
sticker to the main switchboard or a similar point.

A

True

STL 1135/2016 § 46

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

Is the following statement true or false?

Person having sufficient experience or being sufficiently instructed is always allowed to change a knifefuse on loaded conditions if one uses a fuse handle having a protective sleeve.

A

False

(~SFS 6002 7.4.1 Replacement of fuses)

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

Is the following statement true or false?

If replacing the fuse involves a special risk, it may only be done by a skilled person.

A

True
(~SFS 6002 7.4.1 Replacement of fuses)

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

Is the following statement true or false?

Replacing a knife-fuse, when the fuse is fitted to a dead fuse switch or by opening the disconnecting
switch located in supply side of the knife-fuse, is allowed to an instructed person.

A

True

SFS 6002 7.4.1 Replacement of fuses

How well did you know this?
1
Not at all
2
3
4
5
Perfectly