Oral Bank - LANDING GEAR Flashcards

1
Q

Describe the OFF position of the landing gear?

A

Landing gear hydraulic system is depressurised

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

How many degrees can the nose-wheel steering system turn the nose gear with the tiler, and how many degrees with the rudder pedals?

A

70 with tiller, 7 with rudder

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

What does the BRAKE SOURCE amber light indicate when illuminated

A

Active brake sources (hydraulic systems 4,1 and 2) have low pressure

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

How are the landing gear held in position after retraction?

A
  • Main gear by uplocks
  • Nose gear mechanically locked in up position
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

When does the RTO apply max braking? (3)

A
  • A/C on ground
  • Wheel speed above 85kts
  • Thrust levers closed
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

What is the purpose of the brake accumulator?

A

Parking brake application

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

What does a white, crosshatched, expanded gear position indication mean?

A

Landing gear in transit

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

What conditions must be satisfied in order for the landing gear lever lock to release? (2)

A
  • Main gear are tilted
  • Body gear centred
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

What hydraulic system pressurises the brake accumulator?

A

4

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

What value on the brake temp monitoring system causes the BRAKE TEMP Advisory EICAS message to appear?

A

5

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

How does the landing gear extend with the alternate gear extension system?

A

Gear unlocks and door latches are electrically released and gear free-falls

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

Why is it necessary to pressurise hydraulic system 4 before pressuring the other systems?

A

Precludes the transfer of fluid from system 1 or 2 into system 4. (when parking brake is set, and then released, brake hydraulic return lines dump into system 4)

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

What does the EICAS message LIMITER indicate? (3)

A
  • Brake torque limiter failure on more than one wheel per truck
  • The parking brake lever is released and the parking brake valve is not fully open
  • Brake system control unit power loss occurs
How well did you know this?
1
Not at all
2
3
4
5
Perfectly