Optical Fiber Cabling Media assignment Flashcards
What wavelengths are used with MM fiber? Please select one or more.
A.
1300 nm
B.
1310 nm
C.
1550 nm
D.
850 nm
The correct answers are:
1300 nm,
850 nm
What are the typical light sources for MM fiber? Please select one or more.
A.
LED
B.
Halogen
C.
VCSELs
D.
Laser
The correct answers are:
VCSELs,
LED
Please match the correct answer to the measurements of optical fiber cable given.
200 m of 50/125 @ 850 nm
Answer 1
1500 of SM inside @ 1310 nm
Answer 2
2800 m of SM outside @ 1550 nm
Answer 3
500 m of 62.5/125 @ 1300 nm
Answer 4
The correct answer is:
200 m of 50/125 @ 850 nm → 0.7 dB,
1500 of SM inside @ 1310 nm → 1.5 dB,
2800 m of SM outside @ 1550 nm → 1.4 dB,
500 m of 62.5/125 @ 1300 nm → 0.75 dB
TIA-568-C standard recommends the A-B polarity scenario for duplex patch cords
Select one:
True
False
True
What are two advantages of an LC connector over an ST connector?
A.
Dust proof
B.
Wiggle proof
C.
Bigger
D.
Pull proof
The correct answers are: Wiggle proof,
Pull proof
Method A for duplex applications, making the transceiver-receiver flip for Position 1 (Tx) to Position 2 (Rx) is required in a patch cord at one end. This is achieved with a A-A patch cord.
Select one:
True
False
The correct answer is ‘True’.
What does SFF stand for?
A.
Small Fiber Form
B.
Small Factor Form
C.
Small Form Factor
D.
Singlemode Fiber Find
The correct answer is:
Small Form Factor
Please select the appropriate cable to the densities provided
Second highest density
Answer 1
Lowest density
Answer 2
Highest density
Answer 3
Second lowest density
Answer 4
The correct answer is:
Second highest density → Loose-tube,
Lowest density → Breakout,
Highest density → Ribbon,
Second lowest density → Distribution (Tight-buffered)
What are the core sizes of multimode fiber? Please select one or more
A.
62.5 µm
B.
9 µm
C.
125 µm
D.
50 µm
The correct answers are:
50 µm,
62.5 µm
Please select which multimode has the highest and lowest bandwidth.
Lowest Bandwidth
Answer 1
Highest Bandwidth
Answer 2
You have correctly selected 1.
The correct answer is:
Lowest Bandwidth → OM1,
Highest Bandwidth → OM4
What type of optical fiber cable assembly is typically used inside buildings?
A.
Loose-tube
B.
Unlisted communication cable
C.
Tight-buffered
D.
250 pair
The correct answer is:
Tight-buffered
An adapter can be used to mate 2 male MPO connectors together.
Select one:
True
False
The correct answer is ‘False’.
Which duplex fiber patch cords are considered cross-over type?
A.
Balun
B.
A-to-A
C.
A-to-B
D.
Universal
The correct answer is:
A-to-A
Please select the appropriate description for the following MPO adapters.
Type B
Type A
Key-up to key-up,
Key-up to key-down
The correct answer is:
Type B → Key-up to key-up,
Type A → Key-up to key-down
A furcation tubing is used to build up the fiber strand’s diameter, to allow direct connectorization.
Select one:
True
False
The correct answer is ‘True’.
What type of optical fiber should be used to connect an Horizontal Cross-connect to a Main Cross-connect, 2500 meters apart?
A.
Singlemode
B.
62.5 µm Multimode
C.
50 µm Laser-optimized Multimode
D.
50 µm Multimode
The correct answer is:
Singlemode
Select the following to describe fiber position one (1) on a male MPO connector is by viewing the connector face.
A white dot on one side denotes position
Key
Positon 1 is on the
You have correctly selected 2.
The correct answer is:
A white dot on one side denotes position → 1,
Key → up,
Positon 1 is on the → left
What is the diameter of the cladding of an optical fiber strand?
A.
900 µm
B.
50 µm
C.
125 µm
D.
250 µm
The correct answer is:
125 µm
What are the typical dimensions of the buffer coating protecting the cladding of the fiber strand? Please select one or more.
A.
125 µm
B.
900 µm
C.
200 µm
D.
250 µm
You have correctly selected 1.
The correct answers are:
250 µm,
900 µm
What type of optical fiber cable assembly should be used if it is going to be exposed to wide temperature changes?
A.
Tight-buffered
B.
250 pair
C.
Bloomberg
D.
Loose-tube
The correct answer is: Loose-tube
The cladding has a higher refractive index than the core.
Select one:
True
False
The correct answer is ‘False’.
Which one of the following is not a optical fiber connector.
A.
ST
B.
LC
C.
BNC
D.
SC
E.
MU
The correct answer is:
BNC
What is the minimum outside diameter of the coating that is applied over the optical fiber cladding?
A.
62.5 µm
B.
250 µm
C.
900 µm
D.
125 µm
The correct answer is:
250 µm
What wavelengths are used with OS1 SM fiber? Please select one or more.
A.
1310 nm
B.
1300 nm
C.
850 nm
D.
1550 nm
The correct answers are:
1550 nm,
1310 nm
Please match the cable description to the cable type.
- Contains multiple 900 µm tight-buffered fiber strands
- Has a strand coating of 900 micrometers
- Contains multiple, jacketed , single-strand cables
- Patch or Equipment Cord
Distribution, Zip cord, Breakout, Tight Buffered
The correct answer is:
Contains multiple 900 µm tight-buffered fiber strands → Distribution,
Contains multiple, jacketed , single-strand cables → Breakout,
Patch or Equipment Cord → Zip cord,
Has a strand coating of 900 micrometers → Tight Buffered