Networking 1-4 Flashcards
increases bandwidth efficiency by allowing both ends of a connection to transmit and receive data simultaneously.
Full-duplex communication
either type of cable can be used to connect to other devices, and the interface automatically adjusts to communicate successfully
auto-MDIX enabled
A collision that occurs after 512 bits of the frame have been transmitted
Late Collisions
Number of messages retransmitted because of an Ethernet collision.
Collisions
Sum of all errors that prevented the final transmission of datagrams out of the interface that is being examined
Output Errors
errors are generated when the calculated checksum is not the same as the checksum received.
CRC
discarded because they exceed the maximum frame size for the medium.
Giants
discarded because they are smaller than the minimum frame size for the medium
Runts
Total number of errors.
Input Errors
These display a summary for all interfaces including the IPv4 or IPv6 address of the interface and current operational status
show ip interface brief and show ipv6 interface brief
This displays the commands applied to the specified interface.
show running-config interface interface-id
These display the contents of the IPv4 or IPv6 routing table stored in RAM. I
show ip route
Shows the entire section that starts with the filtering expression
section
Excludes all output lines that match the filtering expression
Excludes
Shows all the output lines from a certain point, starting with the line that matches the filtering expression, as shown in the example
begin
