Module 1 - Keywords Flashcards
Accuracy
Measure of the closeness of agreement between an individual test result and the true value. If a test is accurate, it is in close agreement with the true value. An accepted reference value may be used as the true value, though in practice the true value is not usually known.
Anomaly (Outlier)
A value in a set of results that is judged not to be part of the inherent variation
Confidence
A qualitative judgement expressing the extent to which a conclusion is justified but the quality of evidence
Error
The difference between an individual; measurement and the true value (or accepted value reference) of the quantity being measured
Precision
The closeness of agreement between independent measurements obtained under the same conditions. It depends only on the distribution of random errors (i.e. the spread of measurements) and does not relate to the true value
Repeatability
The precision obtained when measurement results are produced over a short time by one person (or the same group) using the same equipment in the same place
Reproducibility
The precision obtained when measurement results are produced over a wider timescale by different people using equivalent equipment in different (but equivalent)places
Resolution
The smallest change in the quantity being measured that can be detected by an instrument
Uncertainty
The precision attached to a measurement which characterises the range of values within which the true value is asserted to lie. This is normally expressed as a range of values such as 44.0 +- 0.4
Validity
Can apply to an individual measurement or a whole investigation. A measurement is valid if it measures what it is supposed to be measuring. An investigative procedure is valid if it is suitable to answer the question being asked. Validity will be reduced, for example, if no negative control is included in an investigation into the efficacy of a therapeutic drug
