Brainscape's Knowledge GenomeTM

Browse over 1 million classes created by top students, professors, publishers, and experts.


See full index

MTP > M7 adrian > Flashcards

M7 adrian Flashcards

1
Q

means to comparent measured data of the inspected tool with the true value of the measurement value.

A

Calibrating

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

it protects most of the countersinking tools surface of the workpiece.

A

Nylon face fitted

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

Are easily combustible due to the carbon in the molecular structure and their low flash and ignition point.

A

Oils and greases

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

Type of fire extinguishers that involves elimination of O2

A

Carbon Dioxide

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

has a vertical beam scale fixed to a flat base.

A

Vernier height gauge

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

In a megohmmeter, what does “OL” means?

A

OPEN LEADS or LEAD OPEN

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

is a covering law and serves the company’s internal emergency and catastrophe protection

A

Alarm order

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

is suitable for many production operations and is manufactured in slip. Paste and liquid forms.

A

Cetyl Alcohol

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

what is the most common fire extinguishing agent for aircraft cabin fires.

A

Halon

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

what should only be used for class A fires.

A

Water

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

AFFF stands for?

A

AQUEOUS FILM FORMING FOAM

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

It is solely a mechanic’s job to keep the tools in good condition.

A

False

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

In correct lubrication, it is necessary to push the seal out with the grease.

A

False

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

are made with an uneven spacing; in that way the effect of periodical vibration is reduced.

A

Modern Reamers

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

used to hold the work in the proper position during drilling.

A

VICE

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

in sawing the slot it creates must be greater than the blade thickness.

A

Clearance

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
17
Q

used to check the interference gaps and made of thin steel leaves.

A

Feeler gauge

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
18
Q

used to mark permanent lines on components or part surfaces.

A

Scriber

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
19
Q

amount of rotational force applied when tightening a fastener.

A

Torque

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
20
Q

control friction and wear by introducing friction reducing film between moving surfaces in contac

A

Lubricant

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
21
Q

finishing operation then provides closer control of hole sizes and meter finishing than drilling alone.

A

Reaming

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
22
Q

it is related to crisis type emergency sination whose impact extends beyond the company.

A

Phase II

23
Q

pressure should be applied on both forward and backward strokes.

A

Soft Metals

24
Q

it will cause very fast degreasing of the skin thus creating the precondition for dermatitis.

A

Solvents

25
Q

when drilling metal, what metal requires to ensure that there is a fire extinguisher next to you.

A

MAGNESIUM OR TITANIUM ALLOYS

26
Q

this tool used to prevent inaccurate measurement due to over tightening.

A

RATCHET STOP

27
Q

it will determine the airworthiness of the aircraft

A

CALIBRATION TOOLS

28
Q

what is unplanned measurement

A

Tolerance

29
Q

the difference between the basic dimension and the upper or lower limit is called

A

Tolerance

30
Q

it is related to local accidents ( fire and material damage )

A

ALERT PHASE l

31
Q

he/she should not take part in the actual lifting.

A

TEAMLEADER

32
Q

this device’s measure the current flow indirectly by measuring the magnetic field caused by the current flow.

A

CLAMP METER

33
Q

it is a lubricant composed of oil and sometimes the oil is thicked with soap or other thickener to make a semi - solid product.

A

Grease

34
Q

is only suited for drilling. Counter sinking or champering of small holes in material with low strength.

A

Hand Drill

35
Q

is base on distance equal to one ten millionth of the distance from the equator to the poles measured along a meridian aling the earth surface

A

LENGTH OF METER

36
Q

what result to an inaccurate reading of measure

A

READING (PARALAX) ERROR

37
Q

what is the ideal resistance in an isolation check.

A

RESISTANCE MUST BE HIGH

38
Q

sometimes called back marker

A

Hole Finder

39
Q

sometimes called anchor nut

designed for accurate drilling of rivet holes for nut plates

A

NUT PLATE DRILL JIG

40
Q

use to measure either inside or outside

A

RADIUS GAUGE

41
Q

this damage can result in anything from minor repair to catastrophic event

A

FOD (Foreign Object Damage)

42
Q

what degrees is the most commonly used counter sinks for a normal fastener

A

100•

43
Q

is driven by electric motor through a speed changing mechanism, either a belt transmission or a gear transmission

A

Pillar Drill

44
Q

when removing the reamer from the hole rotate it in the direction of the?

A

Cut

45
Q

what is the function of sawing?

A

USED FOR SEPARATING MATERIALS BUT ALSO PRODUCING GROOVES & NOTCHES

46
Q

where is thickness / feeler gauge generally used?

A

TO CHECK INTERFACE GAPS OR GAPS UNDER BOLT HEADS OR NUTS

47
Q

what is the difference between aviation oxygen compared to a normal oxygen?

A

OXY IS MUCH DRIER THAN NORMAL OXYGEN

48
Q

a saw blade needs replacement missing, how many teeths?

A

3-4 TEETH , SIDE BY SIDE

49
Q

in isolation testing of a/c wire insulation, what is the desired resistance?

A

HIGH RESISTANCE

50
Q

at what height that is determined that you are working on a high attitude work place

A

Above 1 Meter from the ground

51
Q

what will you use when performing tasks that involve that danger of falling and no protective installations are at the location or the installed devices do not ensure suitable protection

A

Safety Harness

52
Q

consists of a half round dial that is graduated from 0• to 180• and is suited for measuring angles of components and parts?

A

Protractor

53
Q

because of their compact dimensions the drill motor can well be applied in difficult environment, like (e.g limited space)

A

HAND HELD DRILL MOTOR WITH A STRAIGHT GRIP OR A PISTOL - GRIP

54
Q

water can be use for extinguishing metal fire?

A

False

MTP (14 decks)

Brainscape helps you reach your goals faster, through stronger study habits.
© 2024 Bold Learning Solutions. Terms and Conditions