LT Study Guide Questions Flashcards
1)Time and Date will be displayed for how long after start up.
A) 5 seconds
2)The TIC has up to ______ modes, however LFR will only use ____ of these modes.
A) 7 and 4
3) ___ Mode is used for attack and rescue in large, fully developed fires
A) Fire
3) In fire mode colorization is gradually added at temperatures above _____
A) 300 F
4) In fire mode a color reference bar is marked with ____ graduations
4
5) _____ Mode is used for checking hot spots after the fire is out
A) Overhaul
6) In overhaul mode ____ colorization is added to the hottest ___ of the scene.
A) Red, 2%
7) In overhaul mode ___ colorization is added to the next hottest _____ of the scene
A) yellow, 5%
9) Size up mode features a limited dynamic range of ____ so that ____ colorization comes in earlier at 180F
A) 480F, yellow
8)____ Mode is used to easily locate the fire from outside the structure
Size
10)_____ mode is used for predictive maintenance to check equipment and buildings to help prevent fire.
Inspection
11) Inspection mode uses a ______ hot full color scale (_____,______,______,_____,______ through to _____)
A) white- black, blue, purple, orange, yellow, white)
12) The ____ reading is displayed on the bottom right-hand corner of the display.
temperature
13) In fire mode, a green column against the temperature reference scale also shows the ____ temperature
spot
14) The TIC can measure scene temperatures between ____ and ____
A) -40 and +2000