Landing Gear Flashcards
Positioning the LANDING GEAR Lever ______ removes hydraulic pressure from the Landing Gear System.
OFF
The Lever Lock Override Trigger in the LANDING GEAR lever bypasses the ______ under certain conditions.
the lever lock if the lever lock solenoid fails
A Main Gear Position Light is not illuminated with the LANDING GEAR lever in the DOWN position. The Supplemental Gear Position light is green. The respective gear is _____.
down and locked
The _______ supplies hydraulic fluid to raise the landing gear when the Hydraulic System A engine-driven pump volume is lost due to an en engine failure.
Landing Gear Transfer Valve
Opening the Manual Extension Access Door _______ Landing Gear ______.
disables / retraction
Pulling a Manual Gear Extension Handle _______ allowing the respective gear to free-fall.
releases the mechanical uplocks
With the Flaps greater than _______ pushing the Horn Cutout switch will not silence the Landing Gear Configuration Aural Warning (horn).
10
______ supplies pressure to the Alternate Brake System if Normal Brake System pressure is low or fails.
Hydraulic System A automatically
Braking ______ if both Hydraulic Systems A and B are lost.
is available through a Brake Accumulator
_______ System(s) provide(s) skid locked wheel touchdown and hydroplane protection.
The Normal and Alternate Brake
Maximum braking automatically begins during a rejected takeoff ________.
above 90 knots and retarding the forward thrust levers to IDLE
Landing with the Autobrakes set to RTO:
results in no autobraking
The Autobrake select switch allows selection of ________.
increasing rates of deceleration
Autobrakes when engaged _______ when thrust reversers and spoilers deploy during landing.
reduce pressure to maintain selected deceleration rate
Disarm the Autobrake System after braking begins by ________.
all of the above
