Flight Instruments Flashcards
With APP annunciated, the Integrated Standby Flight Display (ISFD) displays _______ deviation data.
GS and LOC
The PFD automatically displays on the ______ if the Outboard Display Unit (DU) fails.
inboard DU
The Primary Flight Display (PFD) shows ______.
all of the above
The Speed Bug (magenta hollow arrow) indicates a/an _______.
manually selected MCP speed or FMC computed speed (IAS/MACH window blank)
The Maximum (Vmax) Speed is indicated by _______.
the bottom of the red and black alternating hash marks forming a vertical bar in the upper portion of the airspeed tape.
The Maximum Maneuvering Speed is indicated by _______.
the bottom of the amber bar in the upper portion of the airspeed tape.
The Minimum Maneuvering Speed (Vmvr) for full maneuver capability is indicated by ________.
the top of the amber bar in the lower portion of the airspeed tape
The Minimum Safe Operating (Vmin) Speed is indicated by ________.
the top of the red and black alternating hash marks forming a vertical bar in the lower portion of the airspeed tape.
______ to silence the Mach/Airspeed Overspeed Warning clacker.
Reduce airspeed below Vmo/Mmo
The Pitch Limit Indication (PLI) indicates ________.
Pitch Limit (Stick Shaker activation) as calculated by the SMYD
On approach at destination the amber crosshatched area shows the _______.
FMC landing altitude for destination runway or airport
The triangular pointer and line (green) on the Altitude Display shows Minimums in feet _____ with Minimums Reference Indicator on EFIS panel set to ______.
MSL/BARO
The ______ appears on the attitude indicator ______.
Radio Altitude / below 2500 ft AGL
Altitude Disagree Alert appears if the CA and FO altitude indications disagree by more than ______ feet or more than 5 continuous seconds.
200
The current heading is indicated ________.
under the Current Heading Pointer triangle (white)
Us the CDU LEGS page STEP prompt to step through the active route on the ND in _____ mode.
PLN
EFIS MODE/NAV FREQ DISAGREE (amber) indicates _____ (Select all correct answers)
3) APP is selected with a VOR tuned
4) VOR is selected with an ILS tuned
Enter the runway _______ using the RWY key on the HGS Control Panel.
length and elevation
RO CTN (amber) on the HGS Digital Annunciator Panel indicates______,
loss of rollout guidance below 500 ft AGL
DISPLAY CONTROL PANEL (amber) indicates _______.
a failed EFIS Control Panel on the affected side
INSTR SWITCH (amber) indicates _______.
both the Captains and First Officers displays are using the same source of IRU data.
CDS MAINT (white) indicates ______.
a dispatchable CDS fault has occurred
CDS FAULT (amber) indicates ________.
a non-dispatchable CDS fault has occurred
DSPLY SOURCE (amber) indicates _______.
a DEU has failed
