IRR - PD 1570 Flashcards
There shall be a seal to be used by the Board to authenticate its official documents. What is it called?
Seal of the Board of Aeronautical Engineering
What is the max diameter of the Seal of the Board of AeE?
48 mm (1-7/8 inches)
The seal shall bear a design of an _______.
airplane wing section
On the airplane wing section, shockwaves are attached to the _____________.
leading and trailing edges
Near the leading edge is an atom having ______ orbiting electrons.
four
Between __ concentric circles along the circumference shall be inscribed the words “__________” at the upper portion of the circumference and the words “________” at the lower portion of the circumference.
2, Professional Regulation Commission, Board of Aeronautical Engineering
Representations:
Airplane wing section - _______
atom - ________
4 orbiting electrons - _________
shockwaves - ________
- aircraft
- as a whole symbolizes engineering activity
- 4 major activities/areas in the practice of AeE
- symbolic of the fact that AeE is a dynamic and progressive profession
The ____________ shall have the same basic design, meaning, and size of that of the Board. However, the words “_________” shall be on the upper portion of the circumference and the word “_________” shall be on the lower portion of the circumference. Aside from this, slightly below the center of the seal shall be printed horizontally the __________, and the corresponding _______ shall also appear in a horizontal line above it.
Seal of the Aeronautical Engineering, Aeronautical Engineer, Philippines, full name of the engineer, registration number
Every applicant shall submit with his application this supporting paper.
copy of transcript of scholastic records or completion of an equivalent course offered outside the country
If applicant is a foreigner, _________ between the Republic of the PH and the state of country of which he is a subject is required as a supporting paper with the applicant’s application.
proof of reciprocity
What percentage is Aerodynamics?
25%
What percentage is Aircraft Structures and Design?
20%
What percentage is Aircraft Powerplant?
20%
What percentage is Aircraft Construction, Repair, and Modification?
15%
What percentage is Engineering Economics and Management, Laws and Ethics?
10%