ICND2 - Part 6 Quiz

Question 1

Link-local addresses are addresses that are used for local subnets only.

a. True
b. False

Answer 1

a. True

Question 2

What are two methods to use IPv6 with IPv4? (Choose 2)

a. Tunneling
b. Dual protocol
c. Dual routing
d. Dual Stacking
e. You must use either IPv4 or IPv6, you cannot use both at the same time.

Answer 2

a. Tunneling

d. Dual Stacking

Question 3

An IPv6 address starts with FE80:, what is this type of address?

a. Unique local
b. Unique Global
c. Unique Local Multicast
d. Link Local

Answer 3

d. Link Local

Question 4

The stateful DHCP server in IPv6 gives out a default gateway.

a. True
b. False

Answer 4

b. False

Question 5

What protocol does NDP run on?

a. ICMPv6
b. FTP
c. OSPF
d. EIGRP
e. TCP
f. UDP
g. IP

Answer 5

a. ICMPv6

Question 6

What is SLAAC?

a. An alternative to DNS
b. An alternative to NDP
c. An alternative to DHCP
d. An alternative to TCP/UDP

Answer 6

c. An alternative to DHCP

Question 7

Which bit is inverted when using EUI-64 addresses?

a. 1st
b. 2nd
c. 3rd
d. 4th
e. 5th
f. 6th
g. 7th
h. 8th

Answer 7

g. 7th

Question 8

What is 2 inverted when using EUI-64?

a. 4
b. 0
c. A
d. B

Answer 8

b. 0

Question 9

What is inserted between the first half of the MAC address and second half of the MAC address?

a. FE80
b. FD00
c. FFFE
d. FFFF

Answer 9

c. FFFE

Question 10

What enables IPv6 on a router?

a. Ipv6 routing
b. Ipv6 enable
c. Ipv6 start
d. Ipv6 unicast-routing

Answer 10

d. Ipv6 unicast-routing

Question 11

What command must be used with ping to ping an IPv6 address?

a. Nothing
b. Ping6
c. Ping ipv6
d. None of the above

Answer 11

a. Nothing

Question 12

What must be done to enable OSPFv3 routing on interfaces on a router?

a. Use the network commands to ensure the interface’s network is included.
b. Apply the OSPF statements directly to the interface.
c. Enable the OSPF process and ensure passive-interfaces are set for the interfaces desired to be used.
d. Apply network statements on the interfaces needed.

Answer 12

b. Apply the OSPF statements directly to the interface.

Question 13

What are two things that can be done to influence how OSPF calculates the shortest path? (Choose 2)

a. Set the bandwidth on the interfaces.
b. Set the speed on the interfaces.
c. Set the duplex on the interfaces.
d. Set the cost on the interfaces.

Answer 13

a. Set the bandwidth on the interfaces.

d. Set the cost on the interfaces.

Question 14

What command can I use to see neighbors negotiate in real time?

a. Debug ip ospf
b. Debug ipv6 ospf adjacencies
c. Debug ipv6 ospf events
d. Debug ipv6 ospf neighbors

Answer 14

b. Debug ipv6 ospf adjacencies

Question 15

OSPFv3 interfaces must be in the same subnet in order to establish neighbor relationships.

a. True
b. False

Answer 15

b. False

Question 16

EIGRPv6 has an auto-summary feature.

a. True
b. False

Answer 16

b. False

Question 17

IPv4 and IPv6 ACLs can be applied to an interface at the same time.

a. True
b. False

Answer 17

a. True

Question 18

IPv6 ACLs have an implicit deny at the end of the list but also have some implicit permits. What is permitted?

a. DHCP
b. ICMP
c. EIGRPv6
d. OSPFv3
e. MDP
f. MTU

Answer 18

b. ICMP

Question 19

What does the log command do at the end of an IPv6 ACL do?

a. Logs the ACL into the system log when making changes.
b. Logs hits on the ACL as they occur.
c. Logs when an ACL is applied to an interface.
d. Logs when an ACL has reached the end of a list hitting the implicit deny statement.

Answer 19

b. Logs hits on the ACL as they occur.

Question 20

The NDP protocol falls under ICMP.

a. True
b. False

Answer 20

a. True