HYD G RSVR OVHT

Question 1

Triggering conditions:

Answer 1

Fluid temperature is equal to or greater than 93 degrees.

Alert resets when the temperature reaches 88 degrees.

Question 2

Initial actions:

Answer 2

PTU OFF
-In an overheat condition the FAULT light will remain ON even after the PTU has been switched OFF, until the fluid temperature is 88 degrees or below.

G Engine 1 Pump OFF
-FAULT light will be illuminated initially. When selected OFF the FAULT light will remain illuminated as long as the overheat condition exists.

Question 3

G SYS LO PR

Answer 3

Fuel consumpt incr
-Triggered when the failure or combination of failures affects the nominal aerodynamic characteristics of the aircraft.

FMS predictions unreliable
-Disregard FMS fuel predictions and refer to QRH/PER-B fuel penalty tables.

Question 4

STS

APPROACH PROCEDURES

HYD LO PR

Answer 4

If G OVHT out:
-Green Eng 1 Pump ON

If HYD not recovered:

• L/G gravity extn
• LDG dist proc apply

Fuel consumpt incr
FMS fuel predictions unreliable
Slats/flaps slow
CAT 3 single only

Question 5

Inop Systems:

Answer 5

Green HYD 
SPLR 1 and 5
CAT 3 Dual 
N/W STRG
Auto brake
Normal brake
L/G retract 
Reverser 1
Yaw damper 1