HYD B ELEC PUMP LO PR or OVHT

Question 1

Triggering conditions:

Answer 1

LO PR: Triggers when pump outlet pressure is equal to or less than 1450 psi (alert resets if pressure 1750 psi or greater).

OVHT: Triggers when the blue elec pump overheats.

Question 2

Annunciations?

Answer 2

Blue Elec Pump - OFF

Fuel consumpt incrsd

FMS predictions unreliable

Question 3

Associated procedures: B SYS LO PR

Answer 3

Fuel consumpt incrsd
(This message is triggered when the failure or combination of failures affects the nominal aerodynamic characteristics of the aircraft)

FMS predictions unreliable
(Disregard FMS fuel predictions and refer to QRH/PER-B Fuel Penalty Factors Tables in order to find the applicable fuel penalty factor)

Question 4

Secondary Failures: F/CTL

Answer 4

SPLR 3 inop.

Receives hydraulic power to move the surface, from the blue system

Question 5

Approach procedure:

HYD LO PR:
-If BLUE OVHT OUT
Blue Elec pump auto

Answer 5

If AC power is available the pump will operate in flight.

Question 6

Ldg dist proc apply:

Answer 6

QRH/PER

No SPLR 3 so increase in landing distance.

Question 7

CAT 3 Single only?

Answer 7

Require all hydraulic systems serviceable for redundancy.