Homework1 Flashcards
How can operating failures and malfunctions of equipment be reduced?
Excess wear and minor defects detected early
What kind of events must be recorded in the aircraft logbook regarding the aircraft, its components and accessories.
Significant events
What may be included in a Service Bulletin?
Detailed instructions for service
Illustrated parts catalogs present component breakdown in what sequence?
Disassembly sequence
When do emergency AD’s require compliance?
Immediately
According to the TCDS (fig. 10-1) what additional equipment is required to be installed and functioning to be considered airworthy?
Stall warning system
Where can the contents of a “Preflight Inspection” be found?
Pilot’s Operating Handbook
What is the advantage of a Progressive Inspection program over an Annual Inspection?
Can be accomplished overnight and not miss any money making potential.
What would you inspect the exhaust stacks for per requirements of the FAR part 43 Annual/100-Hr requirements? Select all that apply.
Cracks
Defects
Improper attachment
Although similar to progressive inspections how are Continuous inspections different?
Apply to large or turbine powered aircraft
What was the original ATA spec called?
ATA Spec 100
What ATA system code covers landing gear?
32
During a Severe Turbulence Inspection emphasis should be placed on inspecting what?
Upper and lower wing surfaces for excessive buckles and wrinkles with a permanent set
During a post-fire damage inspection aluminum may appear okay but can be further inspected using what?
A conductivity tester