Flows Flashcards
FO Originating
MCDU Set: Nav IDENT Pos INIT
Guidance Panel: SRC, Speed, ALT SEL, BARO set, HSI, BRG
Glareshield as needed
Displays: auto
sensors: as required
PFD check: airspeed, ADI, altitude, VSI, HSI and Compass
MFD: hydraulic fluid/pressure, status oil, oxygen, hydraulic,
Trim test
Audio control: mic button auto, spark select, volume knob
o2 mask and interphone: control wheel mic hot, regulator 100%, test, 100%
LED flashlight
CB closed
EFB mount
alternate gear extension: electrical override normal
Before start to line
guidance panel set
pfd check
map check, status check
MCDU: transponder, fit for duty, dispatch Sheet, acars, flight plan, perf, notams,
departure review
before start after line
external lights: red bcn on
cockpit windows: closed
shoulder harness
MCDU: transponder alt on,
EICAS: steer off annunciator
after start
slat/flap: set
flight controls: check,
pitch trim: verify
EICAS: engine, oil, vibration, takeoff settings
MCDU: T/O data set
APU control: as required
taxi
brake temp: green
hydraulic panel: sys 1/2 auto
takeoff briefing if PF
before takeoff
pax signs
transponder: TA/RA
T/O config: check
Verify runway visually
after takeoff (PM)
slat/flap: 0
autobarke: off
landing gear: up
APU: off
Climbing through 10,000 PM
External lights: as req
pax signs: sterile
altitude callout “10,000”
climbing through transition
baro set- push std
pfd set
“standards”
approach brief (PM)
weather: obtain
MCDU: set
guidance panel: set
autobarke panel: set
Cat 2 approach brief
RNP approach brief
descent PM
pax signs: on
baro set
pfd set
callout local altimeter setting
descending through 10,000 pm
altitude callout
shoulder harness on
external lights as required.
pax signs: sterile on
landing PM
ATTND CALL button x2
EICAS checked
after landing
Trim: up 4, neutral
slat/flap up
MCDU: transponder alt on
MFD: Wx STBY
APU: as req
parking
transponder: stby
