Flight Instruments Flashcards
With APP annunciated”,” the Integrated Standby Flight
Display (ISFD) displays _____ deviation data.
GS and LOC
The PFD automatically displays on the _____ if the Outboard Display Unit (DU) fails.
inboard DU
The Primary Flight Display (PFD) shows _____.
Correct Answer 4
1) ILS information
2) approach minimums
3) TCAS Avoidance Pitch Commands
4) all of the above
The Speed Bug (magenta hollow arrow) indicates a/an
_____.
manually selected MCP speed or FMC computed speed
IAS/MACH window blank
The Maximum (Vmax) Speed is indicated by ______.
the bottom of the red and black alternating hash marks
forming a vertical bar in the upper portion of the
airspeed tape
The Maximum Maneuvering Speed is indicated by ______.
the bottom of the amber bar in the upper portion of the
airspeed tape
The Minimum Maneuvering Speed (Vmvr) for full maneuver capability is indicated by ______.
the top of the amber bar in the lower portion of the
airspeed tape
The Minimum Safe Operating (Vmin) Speed is indicated by ______.
the top of the red and black alternating hash marks
forming a vertical bar”,” in the lower portion of the
airspeed tape
_____ to silence the Mach/Airspeed Overspeed Warning
clacker.
Reduce airspeed below Vmo/Mmo
The Pitch Limit Indication (PLI) indicates ______.
Pitch Limit (Stick Shaker activation) as calculated by the SMYD
On approach at destination”,” the amber crosshatched area shows the ____.
FMC landing altitude for destination runway or airport
The triangular pointer and line (green) on the Altitude
Display shows Minimums in feet ____ with Minimums
Reference Indicator on EFIS panel set to _____.
MSL / BARO
The _____ appears on the attitude indicator _____.
Radio Altitude / below 2500 ft AGL
Altitude Disagree Alert appears if the CA and FO altitude
indications disagree by more than _____ feet for more than 5 continuous seconds.
200
The current heading is indicated _____.
under the Current Heading Pointer triangle (white)
Use the CDU LEGS page STEP prompt to step through the active route on the ND in ____ mode.
PLN
EFIS MODE/NAV FREQ DISAGREE (amber) indicates _____. (Select ALL correct answers.)
Correct Answer 3, 4
1) selected VOR or ILS frequency disagrees with FMC data
base
2) EFIS mode is not available for selected ILS or VOR
frequency
3) APP is selected with a VOR tuned
4) VOR is selected with an ILS tuned
Enter the runway _____ using the RWY key on the HGS
Control Panel.
length and elevation
RO CTN (amber) on the HGS Digital Annunciator Panel indicates \_\_\_\_.
Loss of rollout guidance below 500 ft AGL
DISPLAY CONTROL PANEL (amber) indicates ______.
a failed EFIS Control Panel on the affected side
INSTR SWITCH (amber) indicates ______.
both the Captain’s and First Officer’s displays are using
the same source of IRU data
CDS MAINT (white) indicates ______.
a dispatchable CDS fault has occurred
CDS FAULT (amber) indicates ______.
a non-dispatchable CDS fault has occurred
DSPLY SOURCE (amber) indicates ______.
a DEU has failed
