E/F Flight controls and hydraulic systems

Question 1

*Primary components of the H60- hydraulic system

Answer 1

Hydraulic pump
Transfer module
Primary Servos
Tail Rotor Servo

Question 2

*The No. 1 Hydraulic System supplies hydraulic pressure to what components

Answer 2

-First Stage primary
- First stage tail

Question 3

What does the pilot assist module do?

Answer 3

Allows hydraulic pressure to be used as a buffer for pilot control

Question 4

*The No. 2 Hydraulic System supplies hydraulic pressure to what components?

Answer 4

Second Stage Primary
PAM

Question 5

What drives the backup pump module

Answer 5

AC power

Question 6

Tell me about the APU accumulator

Answer 6

Sends 3000 PSI charge to APU start motor. Contains nitrogen.

Question 7

*The back-up hydraulic system provides hydraulic pressure to what components?

Answer 7

-APU Acc
- First Stage Primary
- Second Stage Primary
- Second Stage Tail

Question 8

*The cyclic control system provides what controls for the helicopter.

Answer 8

fwd, bwd, lat

Question 9

*The tail rotor control system determines the helicopter’s what?

Answer 9

Heading or yaw by controlling the pitch of the tail rotor blades

Question 10

Long term purpose of AFCS

Answer 10

Airspeed and altitude
Heading
Turn coordination

Question 11

Short term purpose of AFCS

Answer 11

Pitch
Roll
Yaw

Question 12

*What are the AFCS subsystems

Answer 12

SAS, FPS, TRIM, Stabilator control system, and coupled FD(H-60M)

Question 13

*True or False: The purpose of the HYD LEAK TEST switch is to electrically check all leak detection/isolation components.

Answer 13

True