Damage Control

Question 1

Which system is considered to be the least vunerable means of communication?

Answer 1

Sound-Powered Telephone System

Question 2

What is the wet weight of the P100?

Answer 2

164 lbs

Question 3

What is the second objective under the Mission of Engineering Casualty Control?

Answer 3

The second objective is to minimize personnel casualties and secondary damage to vital machinery, since these factors contribute to the successful and continued accomplishment of the first objective.

Question 4

A hot surface is defined as _________, if the piped liquid is F/O.

Answer 4

400 degrees F (205C) or higher

Question 5

How long does the P100 operate on 1.45 gallons of F/O?

Answer 5

2.75 hours or 2 hours 45 minutes or 165 minutes

Question 6

How many gallons of F/O does the P100 hold?

Answer 6

1.45 gallons

Question 7

INSULATION REQUIREMENTS. In general, insulation is installed for all machinery piping and equipment having external surface temperatures of ______ or higher, where loss of heat in the unit or absorption of heat by its surroundings would be detrimental, or where protection for personnel is required.

Answer 7

52°C (125°F)

Question 8

What is the P100 engine L/O capacity?

Answer 8

1.65 liters (0.44 gallons

Question 9

What is the mission of Engineering Casaulty Control?

Answer 9

Its mission is maintenance of all engineering services in a state of maximum reliability under all conditions of operation.

Question 10

The P100 is an Air Cooled, 1 cylinder, 4 stroke diesel engine rated at __ horse power.

Answer 10

10 horse power

Question 11

The P100 pump is a Darley 2BE pump is a single suction, ______ _____ ___________ pump

Answer 11

single stage centrifugal

Question 12

What is the foundation of Engineering Casaulty Control?

Answer 12

Personal Knowledge of the Ship

Question 13

What type of L/O does the P100 use?

Answer 13

15W-40

Question 14

How many gallons per minute does the P100 pump at 83 PSI lifting 20 feet?

Answer 14

100 gallons per minute

Question 15

What is the first objection under the Mission of Engineering Casualty Control?

Answer 15

The first objective under this mission is effective maintenance of propulsion, auxiliary, and electric power systems, lighting, communications, electronic services, ship control, firemain supply and miscellaneous services, such as heating, air-conditioning, and compressed air.

Question 16

The handling of a casaulty control is usually divided into what 3 phases?

Answer 16

• First phase is MINIMIZING CASAULTY
• Second phase is RESTORE SERVICES
• Third phase is MAKING REPAIRS

Question 17

A hot surface is defined as_____________, if the piped liquid is lubricating or hydraulic oil.

Answer 17

650 degrees F (343 C) and higher

Question 18

The P100 lubricating oil filter is a ______________.

Answer 18

resin 60 mesh type

Question 19

What is Engineering Casaulty Control concerned with?

Answer 19

Engineering Casualty Control is concerned with prevention, minimization and correction of operational and battle casualties to machinery, electrical and piping installations.

Question 20

How many gallons per minute does the P100 pump at 45 PSI lifting 39 feet?

Answer 20

68 gallons per minute