Communications Flashcards
Oxygen microphone is active
opening Left oxygen door ()
Service interphone switch connects______when turned to the ON position.
Service & flight interphone system
What occurs when the ground service call switch is pushed?
sound three seconds horn in nose wheel well ()
A Cargo call light switch illuminated means that
illuminated (white) indicates call received from main deck cargo ares ()
The erase switch on the cockpit voice recorder operates when
push and hold for three seconds erases voice recorder if on the ground -AC power ON and parking brake set ()
In ICA/ICD The Captain’s audio panel is INOP. What can be done?
can be switched to VHF -Left Direct on the CAPT Audio System ( overhead panel) ()
What option does the first officer have if right audio panel has failed?
switch OBS Audio Panel System to F/O ()
What does the “call” light on the left HF selector mean?
SELCAL ()
What stations can be connected through the flight interphone system?
the flight interphone system provides communication between flight deck crewmembers. Between the flight deck and ground crew through the flight interphone jack on the nose landing gear ()
The left radio tuning panel has failed. can the left HF sensitivity be adjusted?
not affected by radio tuning panel failure or by OFF switch (FCOM 5.10.4) true for the ICB in ICA not true
The offside tuning light is illuminated on the audio panel - what is one possible risk?
Changing the other person’s frequency inadvertently ()
You shut down all engines and the APU GPU is not available. Can you still contact ATC if needed?
Yes, on Bat only, VHF L and RTP L still operative ()
How many radios or systems can be selected for transmission on an audio panel at one time
only one can be selected at a time for each crew station ()
What must the captain do to clear the “call” light on the center VHF transmitter switch?
the CALL light is reset by selecting the respective transmitter selector
The flight deck communicate with the cabin interphone without using the interphone handset
TRUE (via hot mic)