Communications Flashcards
757/767: The Radio Tuning Panel displays PANEL and FAIL in the frequency windows. What does this indicates
The radio tuning panel is failed
757/767: The use of high frequency datalink (HFDL) is inhibited for how many seconds after an HF voice communication has been completed?
90
757/767: Pilots are alerted by a chime and the EICAS communication message •ATC when an uplink message is received. To display a datalink message which has just been received, press the function key on the CDU.
ATC
757/767: The call system consists of call panels at stations on the flight deck, in the cabin, and nose gear. How is the flight crew alerted of an incoming call?
By chimes and lights
752: The SATCOM CALL light stops flashing and remains illuminated:
When the call is answered
757/767: The Radio Tuning Panel displays FAIL in the frequency windows. What does this indicate?
The selected radio is failed or has been disconnected
752/763: In the case both main AC busses fail, is VHF communication still available?
Yes, the left VHF radio is powered from the standby DC bus
757/767: The flight data recorder starts recording automatically:
When either engine is running or the airplane is in flight
757/767: If the lower portion of the Control Wheel Microphone/Interphone (MIC/INT) Switch is held, this:
flight interphone system
757/767: The flight deck voice recorder can be erased:
If you press the erase switch when on the ground, AC power on, and the parking brake set
763 (as installed): If the PA Select Switch were to be moved into the PA position, this:
Allows PA announcments to be monitored through headset or flight deck speakers
757/767: If the upper portion of the Control Wheel Microphone/Interphone (MIC/INT) Switch is held, this:
Allows transmission on the selected transmitter
756 the ___ switch on the audio control panel permits communication between the flight deck and cabin
SERV INPH
752: The SATCOM CALL light flashes and the chime sounds notifying pilots:
Of an incoming SATCOM call
757/767: When the service interphone (SERV INTPH) switch on the accessory panel is placed in the
ON position:
Adds external (unpressurized area headphone jacks to cabin interphone system