Communications Flashcards
What is the purpose of the ALT-NORM switch on the ACP?
Normal operation or degraded (ALT) mode
ALT mode:
-bypasses applicable ACP. ACP is inop
-can only communicate on one radio
—CA VHF1, FO VHF 2, Observer VHF 1
-ACP switches not functional
-only usable radio heard
—preset volume, headset only, speaker inop
-flight and service interphone inop (no hot mic)
-hand mic and overhead speaker inop
-what works
—mask and boom mics. MASK-BOOM switch
—yoke and ACP PTT or R/T switches
The Push-To-Talk switch, when toggled, transmits on which transmitter?
As selected by the ACP transmitter selector
What does the SERVICE INTERPHONE switch on the aft overhead do?
When positioned ON, allows maintenance/service personnel external jacks to connect to the system.
In OFF, flight deck to cabin still works
What does the ATTEND button do?
Sounds a two tone chime in the passenger cabin and illuminates both pink Master Call Lights
How does the flight deck alert the ground crew?
Ground Call (GRD CALL) switch on overhead panel.
Sounds horn in nose wheel well. Sounds continuously until switch released.
What is the purpose of the VHF TEST switch on the RTP?
Removes automatic squelch, permitting reception of background noise to test receiver
Improves weak signal reception
What is the indication of tuning an offside Radio Tuning Panel RTP)?
Offside tuning white light
Indicates the radio normally associated with this panel is being tuned by another RTP, or
The RTP is being used to tune a radio not normally associated with this radio tuning panel
What failure messages could display on the RTPs, and what do they mean?
FAIL FAIL
-selected radio has failed
PANEL FAIL
-that RTP has failed
What considerations should be made before keying the HF radio on the ground?
Can cause injury or fire
DO NOT KEY
-during fueling/de-fueling
-personnel within 10’ from vertical stab
(Aft service/entry doors open)
Does the hand microphone on the aft electronics panel require the ACP to be tuned before making a PA to the cabin?
No. The PA only hand mic bypasses the ACP
Why must a SELCAL light be reset?
No other calls (call notifications indicated by SELCAL light) can be received until the channel is reset.
Which ACP is used to control the cabin MEDLINK headset jacks?
Observers/ACP 3
What is the priority of source selection for ACARS in the data mode?
- VHF 3, line of sight, 150-200 nm max
- SATCOM
- HF