Com System Flashcards
Audio warnings for altitude alert, the GPWS and windshear are heard through _________. They ________ be controlled or turned off by the crew.
() the speakers and headsets; cannot
() the headsets only; cannot
() the speakers only; cannot
The speakers and headsets; cannot
If the Audio Control Panel (ACP) is operating in the degraded mode, the crewmembers can _______________.
() only use the oxygen mask microphone to communicate
() only communicate on one radio (CA #1/FO #2) and the passenger address system cannot be accessed through the Audio Control Panel (ACP)
() continue to communicate normally using the hand mike
only communicate on one radio (CA #1/FO #2) and the passenger address system cannot be accessed through the Audio Control Panel (ACP)
Pushing a ____________, selects the related communication system for transmission and for reception regardless of whether the related receiver switch is on.
() Transmitter Selector (MIC SELECTOR) Switch
() Receiver Switch
() Push-To-Talk Switch
Transmitter Selector (MIC SELECTOR) Switch
Pushing a Receiver Switch, allows reception of related communication system or navigation receivers. __________ may be selected at a time.
() One switch
() Multiple switches
() Two switches
Multiple Switches
Pushing the Push-To-Talk Switch on the ACP to R/T (Radio-Transmit) keys the oxygen mask or boom microphone for ____________ transmitter selector.
() transmission as selected by
() reception as selected by
() all answers are correct
transmission as selected by
Pushing the Push-To-Talk Switch on the Audio Control Panel (ACP) to I/C (Intercom) keys the oxygen mask or boom microphone for ____________ and bypasses the transmitter selector.
() transmission over the flight interphone
() transmission over the passenger address system
() all answers are correct
transmission over the flight interphone
Placing the MASK-BOOM Switch in the MASK position selects
() the boom microphone for transmission
() the intercom system for transmission
() the oxygen mask microphone for transmission
the oxygen mask microphone for transmission
Placing the MASK-BOOM Switch in the BOOM position selects
() the boom microphone for transmission
() the intercom system for transmission
() the oxygen mask microphone for transmission
the boom microphone for transmission
Pushing and rotating the Speaker (SPKR) switch allows audio from the selected receiver to be heard on overhead speaker, and __________.
() adjusts overhead speaker squelch
() adjusts overhead speaker volume
() adjust overhead speaker volume and GWPS alerting volume
adjusts overhead speaker volume
On the Audio Control Panel, the V on the Filter Switch is for _______.
() receiving NAV voice audio
() transmitting NAV voice audio
() adjusts the squelch of the NAV voice audio
receiving NAV voice audio
On the Audio Control Panel, the R on the Filter Switch is for _______.
() receiving NAV range (code) audio
() transmitting NAV range (code) audio
() adjusts the squelch of the NAV range (code) audio
receiving NAV range (code) audio
The service interphone switch allows ______________.
() passengers (Channel 9) to be added to the service interphone system
() maintenance or service personnel to be added to the flight interphone system
() maintenance or service personnel to be added to the service interphone system
maintenance or service personnel to be added to the service interphone system
What does the Radio Tuning Switch located on the radio tuning panel select?
() The flight intercom to be tuned
() The VHF or HF radio to be tuned
() all answers are correct
The VHF or HF radio to be tuned
What is the function of the Radio Tuning Switch Panel Off Switch?
() Disconnects the pilots from the flight intercom
() Disconnects the jumpseater from the flight intercom
() Disconnects the panel from the communication radios, switch illuminates (white)
Disconnects the panel from the communication radios, switch illuminates (white)
What does the white Offside Tuning Light, located at the top of the Radio Tuning Panel indicate?
() It indicates that radio tuning panel is being used to tune a radio not normally associated with the radio tuning panel
() It indicates that radio tuning panel is being used to tune a radio not available
() The radio tuning panel has failed
It indicates that radio tuning panel is being used to tune a radio not normally associated with the radio tuning panel