Class II Nuclear Facilities and Prescribed Equipment Regulations Flashcards
class II license applications
license to construct
license to operate (commission and routine)
license to decommission
class II prescribed equipment license applications
general requirement
license to service
what is a class II nuclear facility?
facility that includes class II prescribed equipment
what is class II prescribed equipment?
-irradiator that uses more than 10^15 Bq of nuclear substance
-irradiator that requires shielding which is not part of irradiator and can deliver dose of raditation at > 1 Gy/min at 1 m distance
-radioactive source teletherapy machine
(d) a particle accelerator that is capable of producing nuclear energy and has a beam energy of less than 50 MeV for beams of particles with a mass equal to or
less than 4 atomic mass units;
(e) a particle accelerator that is capable of producing nuclear energy and has a beam energy of no more than 15 MeV per atomic mass unit for beams of particles
with a mass greater than 4 atomic mass units; or
(f) a brachytherapy remote afterloader
what is an irradiator?
device that is designed to contain a
nuclear substance and to deliver controlled doses of radiation from that substance to any target except persons
definition of teletherapy machine
device that delivers controlled doses of radiation for therapy
what does license to construct class II facility include (in addition to info in section 3 of general nuclear safety and control regs)
-name and location
-evidence applicant owns site or has authority
-description of the class II equipment
-measures to control facility access and other safety features
-plans and drawings of facility
-purpose of adjacent areas and occupancy levels
-shielding materials and calcs
-location of voids in shielding (ducts etc)
-describe ventilation system
-QA program
-type and energy of radiation produced
-the anticipated maximum dose of radiation that may be received by any person as a result of the commissioning of and during the operation of the nuclear
facility
-the direction of the direct beam of any teletherapy machine to be encompassed by the licence and a description of the physical means that may be used to
limit the direction of that beam
-expected and max workloads during commissioning and operation
-# of hours/week equipment will be operators
-effects on environment and health due to activity
-responsibilities and qualifications requirements for workers
-program to inform persons living close by on effects on environment and health
-plan for decommissioning
what does license to operate class II facility include (in addition to info in section 3 of general nuclear safety and control regs)
-name and location
-commissioning plan
-results of commissioning work
-evidence applicant is owner or has authority
-description of equipment
-proposed policies for operating and maintaining the facility
-policies for handloing, storing, and transporting nuclear and hazardous substances
-QA program
-type and energy of radiation to be produced
-the proposed measures to ensure that the type of beam producible by, and the maximum output energy, limits to the beam orientation and maximum radiation
dose rate of, the Class II prescribed equipment cannot be inadvertently altered
-method and results of measuring effectiveness of shielding
-description of portable radiation detection equipment
-methods for leak tests
-area radiation monitoring system
-max dose received by any person as result of commissioning
expected and max workloads
-# of hours per week machine will be operated (includes QA, research)
-procedures for surveys including location and frequency
-responsibilities and qualifications and training for workers
-plan for decommissioning
what does license to decommission class II facility include (in addition to info in section 3 of general nuclear safety and control regs)
- name and location
- nature of and schedule for decommissioning
- land, buildings etc affected by decommissioning
- nature, quantity, and activity of nuc. at facility
- nature and extent of contamination at facility, including dose rates
- measures to control releases of radioactive and hazardous substances
- max dose that may be received by any person as a result of the decommissioning
- max quantities and concentrations of nuc and hazradous substances that may be released into environment
- effects on environment, health, safety, and measures that will be taken to mitigate these
- responsibilities and qualifications of workers
- description of planned state of site upon finishing the decommissioning
at does license to service class II facility include (in addition to info in section 3 of general nuclear safety and control regs)
- name, model number of equipment, or certificate relating to the equipment
- describe nature of servicing
- methods for the servicing
- qualification and training of workers
- procedures to be followed after completion of servicing to confirm equipment is safe to use
class II exemptions fom license requirements
-prepare a site for class II nuc facility construct, operate, modify, decommission or abandon a class II facility that includes a geo-physical logging particle accelerator -deommision a class II that includes brachy remote afterloader
can someone possess, transfer, or produce class II equipment that doesn’t include nuclear substance without license?
yes
what is certification requirement for class II prescribe equipment
No person shall use Class II prescribed equipment
unless
(a) it is a certified model; or
(b) it is used in accordance with a licence that authorizes its use for development purposes or for scientific
research that is not conducted on humans.
what is included on application for certification of class II prescribed equipment?
-name and address
-name and address of manufacturer of equipment
-brand name and model # of equipment
-design of equipment and its components
-intended use of equipment
-name, quantity (Bq) and form of nuc substance
-method of incorporating nuc substance in equipment
-expected radiation dose rates around equipment in all modes of operation, and methods, calcs, measurements used to establish them
-max radiation dose rate that equipment can deliver
-how to use, transport, and store equipment
-how to conduct leak tests on equipment
-how to deal with accidents involving equipment
-describe labelling of equipment
-QA program that was followed during design and that will be followed during production
-the type of package for and the procedures for packaging and transporting any equipment that may contain a nuclear substance, including the emergency
response plan to be followed in case of a transportation accident involving the equipment
-inspection and servicing program
-the type of beam producible by, and the maximum output energy and limits to the beam orientation of, any particle accelerator or radioactive source teletherapy machine
-max photon and neutron leakage
-1/2 lives of activated components of any accelerator and the radiation dose at 30 cm from those components
how much notice does the commission have to give to refuse to certify or de-certify?
30 days before de-certification
radiation protection requirements for class II nuc facilities apply for what facilities?
all class II nuc facilities other than facilities that include brachy remote afterloaders that incorporate pure beta emitters as their only nuclear substances, or facilities that include particle accelerators for geo-physical logging