Chapter 9 - Built-In Elements Flashcards
At dining and work surfaces, a clear floor space complying with 305 positioned for a _______ approach shall be provided. ____ and ___ clearance complying with 306 shall be provided.
FORWARD, KNEE, TOE
902.2 Dining Surfaces and Work Surfaces, Clear Floor or Ground Space - A clear floor space complying with 305 positioned for a forward approach shall be provided. Knee and toe clearance complying with 306 shall be provided.
The tops of dining surfaces and work surfaces shall be ___ inches minimum and ___ inches maximum above the finish floor or ground.
28 INCHES, 34 INCHES
902.3 Dining Surfaces and Work Surfaces, Height - The tops of dining surfaces and work surfaces shall be 28 inches (710 mm) minimum and 34 inches (865 mm) maximum above the finish floor or ground.
Dining surfaces and work surfaces that are used primarily by children __ years and younger shall not be required to comply where a clear floor or ground space complying with 305 positioned for a ________ approach is provided.
5 YEARS, PARALLEL
902.4 Dining Surfaces and Work Surfaces for Children’s Use - Accessible dining surfaces and work surfaces for children’s use shall comply with 902.4.
EXCEPTION: Dining surfaces and work surfaces that are used primarily by children 5 years and younger shall not be required to comply with 902.4 where a clear floor or ground space complying with 305 positioned for a parallel approach is provided.
At dining and work surfaces for children, a clear floor space complying with 305 positioned for _______ approach shall be provided. ____ and ___ clearance complying with 306 shall be provided, except that knee clearance ___ ______ minimum above the finish floor or ground shall be permitted.
FORWARD, KNEE, TOE, 24 INCHES
902.4.1 Dining Surfaces and Work Surfaces for Children’s Use, Clear Floor or Ground Space - A clear floor space complying with 305 positioned for forward approach shall be provided. Knee and toe clearance complying with 306 shall be provided, except that knee clearance 24 inches (610 mm) minimum above the finish floor or ground shall be permitted.
The tops of tables and counters for children shall be ___ inches minimum and ___ inches maximum above the finish floor or ground.
26 INCHES, 30 INCHES
902.4.2 Dining Surfaces and Work Surfaces for Children’s Use, Height - The tops of tables and counters shall be 26 inches (660 mm) minimum and 30 inches (760 mm) maximum above the finish floor or ground.
Clear floor or ground space complying with 305 shall be provided at benches and shall be positioned at the ___ of the bench seat and ________ to the short axis of the bench.
END, PARALLEL
903.2 Benches, Clear Floor or Ground Space - Clear floor or ground space complying with 305 shall be provided and shall be positioned at the end of the bench seat and parallel to the short axis of the bench.
Benches shall have seats that are ___ inches long minimum and ___ inches deep minimum and ___ inches deep maximum.
42 INCHES, 20 INCEHS, 24 INCHES
903.3 Benches, Size - Benches shall have seats that are 42 inches (1065 mm) long minimum and 20 inches (510 mm) deep minimum and 24 inches (610 mm) deep maximum.
Bench back supports shall be ___ inches long minimum and shall extend from a point __ inches maximum above the seat surface to a point ___ inches minimum above the seat surface.
42 INCHES, 2 INCHES, 18 INCHES
903.4 Benches, Back Support - The bench shall provide for back support or shall be affixed to a wall. Back support shall be 42 inches (1065 mm) long minimum and shall extend from a point 2 inches (51 mm) maximum above the seat surface to a point 18 inches (455 mm) minimum above the seat surface. Back support shall be 2 1/2 inches (64 mm) maximum from the rear edge of the seat measured horizontally.
Bench back support shall be _____ inches maximum from the rear edge of the seat measured horizontally.
2 1/2 INCHES
903.4 Benches, Back Support - The bench shall provide for back support or shall be affixed to a wall. Back support shall be 42 inches (1065 mm) long minimum and shall extend from a point 2 inches (51 mm) maximum above the seat surface to a point 18 inches (455 mm) minimum above the seat surface. Back support shall be 2 1/2 inches (64 mm) maximum from the rear edge of the seat measured horizontally.
The top of the bench seat surface shall be ___ inches minimum and ___ inches maximum above the finish floor or ground.
17 INCHES, 19 INCHES
903.5 Benches, Height - The top of the bench seat surface shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum above the finish floor or ground.
Allowable stresses at benches shall not be exceeded for materials used when a vertical or horizontal force of ___ pounds is applied at any point on the seat, fastener, mounting device, or supporting structure.
250 POUNDS
903.6 Benches, Structural Strength - Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or supporting structure.
Where benches are installed in ___ _________, the surface of the seat shall be ____ _________ and shall not accumulate _____.
WET LOCATIONS, SLIP RESISTANT, WATER
903.7 Benches, Wet Locations - Where installed in wet locations, the surface of the seat shall be slip resistant and shall not accumulate water.
The counter surface height at check-out aisles shall be ___ inches maximum above the finish floor or ground.
38 INCHES
904.3.2 Check-Out Aisle, Counter - The counter surface height shall be 38 inches (965 mm) maximum above the finish floor or ground. The top of the counter edge protection shall be 2 inches (51 mm) maximum above the top of the counter surface on the aisle side of the check-out counter.
The top of the counter edge protection at check-out aisles shall be ___ inches maximum above the top of the counter surface on the aisle side of the check-out counter.
2 INCHES
904.3.2 Check-Out Aisle, Counter - The counter surface height shall be 38 inches (965 mm) maximum above the finish floor or ground. The top of the counter edge protection shall be 2 inches (51 mm) maximum above the top of the counter surface on the aisle side of the check-out counter.
T / F - Check writing surfaces at check-out aisles shall be provided and shall comply with 902.3.
FALSE
904.3.3 Check-Out Aisles, Check Writing Surfaces - Where provided, check writing surfaces shall comply with 902.3.
Check writing surfaces at check-out aisles shall be ___ inches minimum and ___ inches maximum above the finish floor or ground.
28 INCHES, 34 INCHES
904.3.3 Check-Out Aisles, Check Writing Surfaces - Where provided, check writing surfaces shall comply with 902.3.
The accessible portion of the sales and service counter top shall ______ the same depth as the sales or service counter top.
EXTEND
904.4 Sales and Service Counters - Sales counters and service counters shall comply with 904.4.1 or 904.4.2. The accessible portion of the counter top shall extend the same depth as the sales or service counter top.
In alterations, when the provision of a sales and service counter would result in a reduction of the number of existing counters at work stations or a reduction of the number of existing mail boxes, the counter shall be permitted to have a portion which is ___ inches long minimum complying with 904.4.1 provided that the required clear floor or ground space is centered on the accessible length of the counter.
24 INCHES
904.4 Sales and Service Counters - Sales counters and service counters shall comply with 904.4.1 or 904.4.2. The accessible portion of the counter top shall extend the same depth as the sales or service counter top.
EXCEPTION: In alterations, when the provision of a counter complying with 904.4 would result in a reduction of the number of existing counters at work stations or a reduction of the number of existing mail boxes, the counter shall be permitted to have a portion which is 24 inches (610 mm) long minimum complying with 904.4.1 provided that the required clear floor or ground space is centered on the accessible length of the counter.
A portion of the sales and service counter surface that is ___ inches long minimum and ___ inches high maximum above the finish floor shall be provided for a parallel approch.
36 INCHES, 36 INCHES
904.4.1 Sales and Service Counters, Parallel Approach - A portion of the counter surface that is 36 inches (915 mm) long minimum and 36 inches (915 mm) high maximum above the finish floor shall be provided. A clear floor or ground space complying with 305 shall be positioned for a parallel approach adjacent to the 36 inch (915 mm) minimum length of counter.
At sales and service counters, a clear floor or ground space complying with 305 shall be positioned for a ________ approach adjacent to the ___ inch minimum length of counter.
PARALLEL, 36 INCH
904.4.1 Sales and Service Counters, Parallel Approach - A portion of the counter surface that is 36 inches (915 mm) long minimum and 36 inches (915 mm) high maximum above the finish floor shall be provided. A clear floor or ground space complying with 305 shall be positioned for a parallel approach adjacent to the 36 inch (915 mm) minimum length of counter.
T / F - Where the provided sales and service counter surface is less than 36 inches (915 mm) long, the entire counter surface shall be 36 inches (915 mm) high maximum above the finish floor.
TRUE
904.4.1 Sales and Service Counters, Parallel Approach - A portion of the counter surface that is 36 inches (915 mm) long minimum and 36 inches (915 mm) high maximum above the finish floor shall be provided. A clear floor or ground space complying with 305 shall be positioned for a parallel approach adjacent to the 36 inch (915 mm) minimum length of counter.
EXCEPTION: Where the provided counter surface is less than 36 inches (915 mm) long, the entire counter surface shall be 36 inches (915 mm) high maximum above the finish floor.
For a forward approach at sales and service counters, a portion of the sales and service counter surface that is ___ inches long minimum and ___ inches high maximum shall be provided.
30 INCHES, 36 INCHES
904.4.2 Sales and Service Counters, Forward Approach - A portion of the counter surface that is 30 inches (760 mm) long minimum and 36 inches (915 mm) high maximum shall be provided. Knee and toe space complying with 306 shall be provided under the counter. A clear floor or ground space complying with 305 shall be positioned for a forward approach to the counter.
T / F - At sales and service counters with a forward approach, knee and toe space complying with 306 shall be provided under the counter.
TRUE
904.4.2 Sales and Service Counters, Forward Approach - A portion of the counter surface that is 30 inches (760 mm) long minimum and 36 inches (915 mm) high maximum shall be provided. Knee and toe space complying with 306 shall be provided under the counter. A clear floor or ground space complying with 305 shall be positioned for a forward approach to the counter.
T / F - Self-service shelves and dispensing devices for tableware, dishware, condiments, food and beverages shall comply with reach ranges.
TRUE
904.5.1 Food Service Lines, Self-Service Shelves and Dispensing Devices - Self-service shelves and dispensing devices for tableware, dishware, condiments, food and beverages shall comply with 308.
The tops of tray slides shall be ___ inches minimum and ___ inches maximum above the finish floor or ground.
28 INCHES, 34 INCHES
904.5.2 Food Service Lines, Tray Slides - The tops of tray slides shall be 28 inches (710 mm) minimum and 34 inches (865 mm) maximum above the finish floor or ground.
T / F - Where counters or teller windows have security glazing to separate personnel from the public, a method to facilitate voice communication shall be provided.
TRUE
904.6 Security Glazing - Where counters or teller windows have security glazing to separate personnel from the public, a method to facilitate voice communication shall be provided. Telephone handset devices, if provided, shall comply with 704.3.
T / F - Where counters or teller windows have security glazing to separate personnel from the public, and a telephone handset is provided, volume controls shall be provided.
TRUE
904.6 Security Glazing - Where counters or teller windows have security glazing to separate personnel from the public, a method to facilitate voice communication shall be provided. Telephone handset devices, if provided, shall comply with 704.3.
