Chapter 6 - Plumbing Elements and Facilities Flashcards
1
Q
Drinking fountains shall have a clear floor or ground space of ____ inches minimum by ____ inches minimum positioned for a _______ approach and ________ on the unit.
A
30 INCHES, 48 INCHES, FORWARD, CENTERED
602.2 Drinking Fountains, Clear Floor Space - Units shall have a clear floor or ground space complying with 305 positioned for a forward approach and centered on the unit. Knee and toe clearance complying with 306 shall be provided.
2
Q
____ and ___ clearance complying with 306 shall be provided.
A
KNEE, TOE
602.2 Drinking Fountains, Clear Floor Space - Units shall have a clear floor or ground space complying with 305 positioned for a forward approach and centered on the unit. Knee and toe clearance complying with 306 shall be provided.
3
Q
A ________ approach complying with 305 shall be permitted at units for __________ use where the spout is ____ inches maximum above the finish floor or ground and is _____ inches maximum from the front edge of the unit, including bumpers.
A
PARALLEL, CHILDREN’S, 30 INCHES, 3 1/2 INCHES
602.2 Drinking Fountains, Clear Floor Space - Units shall have a clear floor or ground space complying with 305 positioned for a forward approach and centered on the unit. Knee and toe clearance complying with 306 shall be provided.
EXCEPTION: A parallel approach complying with 305 shall be permitted at units for children’s use where the spout is 30 inches (760 mm) maximum above the finish floor or ground and is 3 1/2 inches (90 mm) maximum from the front edge of the unit, including bumpers.
4
Q
Drinking fountain operable parts shall not require _____ ________, ________, or ________ __ ___ _____.
A
TIGHT GRASPING, PINCHING, TWISTING OF THE WRIST
602.3 Drinking Fountains, Operable Parts - Operable parts shall comply with 309.
5
Q
Drinking fountain spout outlets shall be ____ inches maximum above the finish floor or ground.
A
36 INCHES
602.4 Drinking Fountains, Spout Height - Spout outlets shall be 36 inches (915 mm) maximum above the finish floor or ground.
6
Q
The spout for drinking fountains shall be located ____ inches minimum from the vertical support and ____ inches maximum from the front edge of the unit, including bumpers.
A
15 INCHES, 5 INCHES
602.5 Drinking Fountains, Spout Location - The spout shall be located 15 inches (380 mm) minimum from the vertical support and 5 inches (125 mm) maximum from the front edge of the unit, including bumpers.
7
Q
The drinking fountain spout shall provide a flow of water ____ inches high minimum and shall be located ____ inches maximum from the front of the unit.
A
4 INCHES HIGH, 5 INCHES MAXIMUM
602.6 Drinking Fountains, Water Flow - The spout shall provide a flow of water 4 inches (100 mm) high minimum and shall be located 5 inches (125 mm) maximum from the front of the unit. The angle of the water stream shall be measured horizontally relative to the front face of the unit. Where spouts are located less than 3 inches (75 mm) of the front of the unit, the angle of the water stream shall be 30 degrees maximum. Where spouts are located between 3 inches (75 mm) and 5 inches (125 mm) maximum from the front of the unit, the angle of the water stream shall be 15 degrees maximum.
8
Q
The angle of the water stream shall be measured ____________ relative to the front face of the unit.
A
HORIZONTALLY
602.6 Drinking Fountains, Water Flow - The spout shall provide a flow of water 4 inches (100 mm) high minimum and shall be located 5 inches (125 mm) maximum from the front of the unit. The angle of the water stream shall be measured horizontally relative to the front face of the unit. Where spouts are located less than 3 inches (75 mm) of the front of the unit, the angle of the water stream shall be 30 degrees maximum. Where spouts are located between 3 inches (75 mm) and 5 inches (125 mm) maximum from the front of the unit, the angle of the water stream shall be 15 degrees maximum.
9
Q
Where drinking fountain spouts are located less than ____ inches of the front of the unit, the angle of the water stream shall be ____ degrees maximum.
A
3 INCHES, 30 DEGREES MAXIMUM
602.6 Drinking Fountains, Water Flow - The spout shall provide a flow of water 4 inches (100 mm) high minimum and shall be located 5 inches (125 mm) maximum from the front of the unit. The angle of the water stream shall be measured horizontally relative to the front face of the unit. Where spouts are located less than 3 inches (75 mm) of the front of the unit, the angle of the water stream shall be 30 degrees maximum. Where spouts are located between 3 inches (75 mm) and 5 inches (125 mm) maximum from the front of the unit, the angle of the water stream shall be 15 degrees maximum.
10
Q
Where drinking fountain spouts are located between ____ inches and ____ inches maximum from the front of the unit, the angle of the water stream shall be ____ degrees maximum.
A
3 INCHES, 5 INCHES, 15 DEGREES
602.6 Drinking Fountains, Water Flow - The spout shall provide a flow of water 4 inches (100 mm) high minimum and shall be located 5 inches (125 mm) maximum from the front of the unit. The angle of the water stream shall be measured horizontally relative to the front face of the unit. Where spouts are located less than 3 inches (75 mm) of the front of the unit, the angle of the water stream shall be 30 degrees maximum. Where spouts are located between 3 inches (75 mm) and 5 inches (125 mm) maximum from the front of the unit, the angle of the water stream shall be 15 degrees maximum.
11
Q
Spout outlets of drinking fountains for standing persons shall be ____ inches minimum and ____ inches maximum above the finish floor or ground.
A
38 INCHES MINIMUM, 43 INCHES MAXIMUM
602.7 Drinking Fountains for Standing Persons - Spout outlets of drinking fountains for standing persons shall be 38 inches (965 mm) minimum and 43 inches (1090 mm) maximum above the finish floor or ground.
12
Q
Toilet and bathing rooms shall provide turning space complying with ___ within the room.
A
304
603.2.1 Toilet and Bathing Rooms, Turning Space - Turning space complying with 304 shall be provided within the room.
13
Q
T /F - Within toilet and bathing rooms, required clear floor spaces, clearance at fixtures, and turning space shall not be permitted to overlap.
A
FALSE
603.2.2 Toilet and Bathing Rooms, Overlap - Required clear floor spaces, clearance at fixtures, and turning space shall be permitted to overlap.
14
Q
Doors shall not swing into the _____ _____ _____ or clearance required for any _______.
A
CLEAR FLOOR SPACE, FIXTURE
603.2.3 Toilet and Bathing Rooms, Door Swing - Doors shall not swing into the clear floor space or clearance required for any fixture. Doors shall be permitted to swing into the required turning space.
15
Q
Doors shall be permitted to swing into the required _______ _____.
A
TURNING SPACE
603.2.3 Toilet and Bathing Rooms, Door Swing - Doors shall not swing into the clear floor space or clearance required for any fixture. Doors shall be permitted to swing into the required turning space.
16
Q
Doors to a toilet room or bathing room for a single occupant accessed only through a _______ ______ and not for common use or public use shall be permitted to swing into the clear floor space or clearance provided the swing of the door can be ________ to comply with 603.2.3.
A
PRIVATE OFFICE, REVERSED
603.2.3 Toilet and Bathing Rooms, Door Swing - Doors shall not swing into the clear floor space or clearance required for any fixture. Doors shall be permitted to swing into the required turning space.
EXCEPTIONS:
1. Doors to a toilet room or bathing room for a single occupant accessed only through a private office and not for common use or public use shall be permitted to swing into the clear floor space or clearance provided the swing of the door can be reversed to comply with 603.2.3.
2. Where the toilet room or bathing room is for individual use and a clear floor space complying with 305.3 is provided within the room beyond the arc of the door swing, doors shall be permitted to swing into the clear floor space or clearance required for any fixture.
17
Q
Where the toilet room or bathing room is for individual use and a clear floor space complying with 305.3 is provided within the room beyond the arc of the door swing, doors shall be _________ to swing into the clear floor space or clearance required for any fixture.
A
PERMITTED
603.2.3 Toilet and Bathing Rooms, Door Swing - Doors shall not swing into the clear floor space or clearance required for any fixture. Doors shall be permitted to swing into the required turning space.
EXCEPTIONS:
1. Doors to a toilet room or bathing room for a single occupant accessed only through a private office and not for common use or public use shall be permitted to swing into the clear floor space or clearance provided the swing of the door can be reversed to comply with 603.2.3.
2. Where the toilet room or bathing room is for individual use and a clear floor space complying with 305.3 is provided within the room beyond the arc of the door swing, doors shall be permitted to swing into the clear floor space or clearance required for any fixture.
18
Q
Mirrors located above lavatories or countertops shall be installed with the bottom edge of the reflecting surface ____ inches maximum above the finish floor or ground.
A
40 INCHES MAXIMUM
603.3 Toilet and Bathing Rooms, Mirrors - Mirrors located above lavatories or countertops shall be installed with the bottom edge of the reflecting surface 40 inches (1015 mm) maximum above the finish floor or ground. Mirrors not located above lavatories or countertops shall be installed with the bottom edge of the reflecting surface 35 inches (890 mm) maximum above the finish floor or ground.
19
Q
Mirrors not located above lavatories or countertops shall be installed with the bottom edge of the reflecting surface ____ inches maximum above the finish floor or ground.
A
35 INCHES MAXIMUM
603.3 Toilet and Bathing Rooms, Mirrors - Mirrors located above lavatories or countertops shall be installed with the bottom edge of the reflecting surface 40 inches (1015 mm) maximum above the finish floor or ground. Mirrors not located above lavatories or countertops shall be installed with the bottom edge of the reflecting surface 35 inches (890 mm) maximum above the finish floor or ground.
20
Q
Coat hooks shall be located within one of the _____ ______ specified in 308.
A
REACH RANGES
603.4 Toilet and Bathing Rooms, Coat Hooks and Shelves - Coat hooks shall be located within one of the reach ranges specified in 308. Shelves shall be located 40 inches (1015 mm) minimum and 48 inches (1220 mm) maximum above the finish floor.
21
Q
Shelves shall be located ____ inches minimum and ____ inches maximum above the finish floor.
A
40 INCHES MINIMUM, 48 INCHES MAXIMUM
603.4 Toilet and Bathing Rooms, Coat Hooks and Shelves - Coat hooks shall be located within one of the reach ranges specified in 308. Shelves shall be located 40 inches (1015 mm) minimum and 48 inches (1220 mm) maximum above the finish floor.
22
Q
T / F - Water closets and toilet compartments for children’s use shall be permitted to comply with dimensions shown in 604.9.
A
TRUE
604.1 Water Closets and Toilet Compartments, General - Water closets and toilet compartments shall comply with 604.2 through 604.8.
EXCEPTION: Water closets and toilet compartments for children’s use shall be permitted to comply with 604.9.
23
Q
At water closets and toilet compartments serving children ages 3 and 4, the water closet centerline shall be ____ inches.
A
12 INCHES
604.1 Water Closets and Toilet Compartments, General - Water closets and toilet compartments shall comply with 604.2 through 604.8.
EXCEPTION: Water closets and toilet compartments for children’s use shall be permitted to comply with 604.9.
24
Q
At water closets and toilet compartments serving children ages 5 through 8, the water closet centerline shall be between ____ inches and ____ inches.
A
12 INCHES, 15 INCHES
604.1 Water Closets and Toilet Compartments, General - Water closets and toilet compartments shall comply with 604.2 through 604.8.
EXCEPTION: Water closets and toilet compartments for children’s use shall be permitted to comply with 604.9.
25
At water closets and toilet compartments serving children ages 9 through 12, the water closet centerline shall be between ____ inches and ____ inches.
15 INCHES, 18 INCHES
604.1 Water Closets and Toilet Compartments, General - Water closets and toilet compartments shall comply with 604.2 through 604.8.
EXCEPTION: Water closets and toilet compartments for children's use shall be permitted to comply with 604.9.
26
At water closets and toilet compartments serving children ages 3 and 4, the toilet seat height shall be between ____ inches and ____ inches.
11 INCHES, 12 INCHES
604.1 Water Closets and Toilet Compartments, General - Water closets and toilet compartments shall comply with 604.2 through 604.8.
EXCEPTION: Water closets and toilet compartments for children's use shall be permitted to comply with 604.9.
27
At water closets and toilet compartments serving children ages 5 through 8, the toilet seat height shall be between ____ inches and ____ inches.
12 INCHES, 15 INCHES
604.1 Water Closets and Toilet Compartments, General - Water closets and toilet compartments shall comply with 604.2 through 604.8.
EXCEPTION: Water closets and toilet compartments for children's use shall be permitted to comply with 604.9.
28
At water closets and toilet compartments serving children ages 9 through 12, the toilet seat height shall be between ____ inches and ____ inches.
15 INCHES, 17 INCHES
604.1 Water Closets and Toilet Compartments, General - Water closets and toilet compartments shall comply with 604.2 through 604.8.
EXCEPTION: Water closets and toilet compartments for children's use shall be permitted to comply with 604.9.
29
At water closets and toilet compartments serving children ages 3 and 4, the grab bar height shall be between ____ inches and ____ inches.
18 INCHES, 20 INCHES
604.1 Water Closets and Toilet Compartments, General - Water closets and toilet compartments shall comply with 604.2 through 604.8.
EXCEPTION: Water closets and toilet compartments for children's use shall be permitted to comply with 604.9.
30
At water closets and toilet compartments serving children ages 5 through 8, the grab bar height shall be between ____ inches and ____ inches.
20 INCHES, 25 INCHES
604.1 Water Closets and Toilet Compartments, General - Water closets and toilet compartments shall comply with 604.2 through 604.8.
EXCEPTION: Water closets and toilet compartments for children's use shall be permitted to comply with 604.9.
31
At water closets and toilet compartments serving children ages 9 through 12, the grab bar height shall be between ____ inches and ____ inches.
25 INCHES, 27 INCHES
604.1 Water Closets and Toilet Compartments, General - Water closets and toilet compartments shall comply with 604.2 through 604.8.
EXCEPTION: Water closets and toilet compartments for children's use shall be permitted to comply with 604.9.
32
At water closets and toilet compartments serving children ages 3 and 4, the dispenser height shall be ____ inches.
14 INCHES
604.1 Water Closets and Toilet Compartments, General - Water closets and toilet compartments shall comply with 604.2 through 604.8.
EXCEPTION: Water closets and toilet compartments for children's use shall be permitted to comply with 604.9.
33
At water closets and toilet compartments serving children ages 5 through 8, the dispenser height shall be between ____ inches and ____ inches.
14 INCHES, 17 INCHES
604.1 Water Closets and Toilet Compartments, General - Water closets and toilet compartments shall comply with 604.2 through 604.8.
EXCEPTION: Water closets and toilet compartments for children's use shall be permitted to comply with 604.9.
34
At water closets and toilet compartments serving children ages 9 through 12, the dispenser height shall be between ____ inches and ____ inches.
17 INCHES, 19 INCHES
604.1 Water Closets and Toilet Compartments, General - Water closets and toilet compartments shall comply with 604.2 through 604.8.
EXCEPTION: Water closets and toilet compartments for children's use shall be permitted to comply with 604.9.
35
The water closet shall be positioned with a wall or partition to the ____ and to ___ ____.
REAR, ONE SIDE
604.2 Water Closets and Toilet Compartments, Location - The water closet shall be positioned with a wall or partition to the rear and to one side. The centerline of the water closet shall be 16 inches (405 mm) minimum to 18 inches (455 mm) maximum from the side wall or partition, except that the water closet shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum from the side wall or partition in the ambulatory accessible toilet compartment specified in 604.8.2. Water closets shall be arranged for a left-hand or right-hand approach.
36
The centerline of the water closet shall be ____ inches minimum to ____ inches maximum from the side wall or partition, except that the water closet shall be ____ inches minimum and ____ inches maximum from the side wall or partition in the ambulatory accessible toilet compartment specified in 604.8.2.
16 INCHES MINIMUM, 18 INCHES MAXIMUM, 17 INCHES MINIMUM, 19 INCHES MAXIMUM
604.2 Water Closets and Toilet Compartments, Location - The water closet shall be positioned with a wall or partition to the rear and to one side. The centerline of the water closet shall be 16 inches (405 mm) minimum to 18 inches (455 mm) maximum from the side wall or partition, except that the water closet shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum from the side wall or partition in the ambulatory accessible toilet compartment specified in 604.8.2. Water closets shall be arranged for a left-hand or right-hand approach.
37
Water closets shall be arranged for a _________ or __________ approach.
LEFT-HAND, RIGHT HAND
604.2 Water Closets and Toilet Compartments, Location - The water closet shall be positioned with a wall or partition to the rear and to one side. The centerline of the water closet shall be 16 inches (405 mm) minimum to 18 inches (455 mm) maximum from the side wall or partition, except that the water closet shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum from the side wall or partition in the ambulatory accessible toilet compartment specified in 604.8.2. Water closets shall be arranged for a left-hand or right-hand approach.
38
Clearance around a water closet shall be ____ inches minimum measured perpendicular from the side wall and ____ inches minimum measured perpendicular from the rear wall.
60 INCHES MINIMUM, 56 INCHES MINIMUM
604.3.1 Water Closets and Toilet Compartments, Size - Clearance around a water closet shall be 60 inches (1525 mm) minimum measured perpendicular from the side wall and 56 inches (1420 mm) minimum measured perpendicular from the rear wall.
39
The required clearance around the water closet shall be permitted to overlap the _____ ______, associated ____ ____, __________, ________ ______ ________ units, ____ _____, _______, _________ ______, clear floor space and clearances required at other fixtures, and the turning space.
WATER CLOSET, GRAB BARS, DISPENSERS, SANITARY NAPKIN DISPOSAL UNITS, COAT HOOKS, SHELVES, ACCESSIBLE ROUTES
604.3.2 Water Closets and Toilet Compartments, Overlap - The required clearance around the water closet shall be permitted to overlap the water closet, associated grab bars, dispensers, sanitary napkin disposal units, coat hooks, shelves, accessible routes, clear floor space and clearances required at other fixtures, and the turning space. No other fixtures or obstructions shall be located within the required water closet clearance.
40
T / F - Sinks or lavatories are allowed to be located within the required water closet clearance.
FALSE
604.3.2 Water Closets and Toilet Compartments, Overlap - The required clearance around the water closet shall be permitted to overlap the water closet, associated grab bars, dispensers, sanitary napkin disposal units, coat hooks, shelves, accessible routes, clear floor space and clearances required at other fixtures, and the turning space. No other fixtures or obstructions shall be located within the required water closet clearance.
41
In residential dwelling units, a lavatory complying with 606 shall be permitted on the rear wall ____ inches minimum from the water closet centerline where the clearance at the water closet is ____ inches minimum measured perpendicular from the rear wall.
18 INCHES MINIMUM, 66 INCHES MINIMUM
604.3.2 Water Closets and Toilet Compartments, Overlap - The required clearance around the water closet shall be permitted to overlap the water closet, associated grab bars, dispensers, sanitary napkin disposal units, coat hooks, shelves, accessible routes, clear floor space and clearances required at other fixtures, and the turning space. No other fixtures or obstructions shall be located within the required water closet clearance.
EXCEPTION: In residential dwelling units, a lavatory complying with 606 shall be permitted on the rear wall 18 inches (455 mm) minimum from the water closet centerline where the clearance at the water closet is 66 inches (1675 mm) minimum measured perpendicular from the rear wall.
42
The seat height of a water closet above the finish floor shall be ____ inches minimum and ____ inches maximum measured to the top of the seat.
17 INCHES MINIMUM, 19 INCHES MAXIMUM
604.4 Water Closets and Toilet Compartments, Seats - The seat height of a water closet above the finish floor shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum measured to the top of the seat. Seats shall not be sprung to return to a lifted position.
43
T / F - Water closet and toilet compartment seats may be sprung to return to a lifted position.
FALSE
604.4 Water Closets and Toilet Compartments, Seats - The seat height of a water closet above the finish floor shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum measured to the top of the seat. Seats shall not be sprung to return to a lifted position.
44
A water closet in a toilet room for a single occupant accessed only through a _______ ______ and not for common use or public use shall not be required to comply with 604.4.
PRIVATE OFFICE
604.4 Water Closets and Toilet Compartments, Seats - The seat height of a water closet above the finish floor shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum measured to the top of the seat. Seats shall not be sprung to return to a lifted position.
EXCEPTIONS:
1. A water closet in a toilet room for a single occupant accessed only through a private office and not for common use or public use shall not be required to comply with 604.4.
2. In residential dwelling units, the height of water closets shall be permitted to be 15 inches (380 mm) minimum and 19 inches (485 mm) maximum above the finish floor measured to the top of the seat.
45
In residential dwelling units, the height of water closets shall be permitted to be ____ inches minimum and ____ inches maximum above the finish floor measured to the top of the seat.
15 INCHES MINIMUM, 19 INCHES MAXIMUM
604.4 Water Closets and Toilet Compartments, Seats - The seat height of a water closet above the finish floor shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum measured to the top of the seat. Seats shall not be sprung to return to a lifted position.
EXCEPTIONS:
1. A water closet in a toilet room for a single occupant accessed only through a private office and not for common use or public use shall not be required to comply with 604.4.
2. In residential dwelling units, the height of water closets shall be permitted to be 15 inches (380 mm) minimum and 19 inches (485 mm) maximum above the finish floor measured to the top of the seat.
46
Grab bars for water closets shall comply with ___.
609
604.5 Water Closets and Toilet Compartments, Grab Bars - Grab bars for water closets shall comply with 609. Grab bars shall be provided on the side wall closest to the water closet and on the rear wall.
47
Grab bars shall be provided on the ____ ____ closest to the water closet and on the ____ ____.
SIDE WALL, REAR WALL
604.5 Water Closets and Toilet Compartments, Grab Bars - Grab bars for water closets shall comply with 609. Grab bars shall be provided on the side wall closest to the water closet and on the rear wall.
48
Grab bars shall not be required to be installed in a toilet room for a single occupant accessed only through a private office and not for ______ ___ or ______ ___ provided that reinforcement has been installed in walls and located so as to permit the installation of grab bars complying with 604.5.
COMMON USE, PUBLIC USE
604.5 Water Closets and Toilet Compartments, Grab Bars - Grab bars for water closets shall comply with 609. Grab bars shall be provided on the side wall closest to the water closet and on the rear wall.
EXCEPTIONS:
1. Grab bars shall not be required to be installed in a toilet room for a single occupant accessed only through a private office and not for common use or public use provided that reinforcement has been installed in walls and located so as to permit the installation of grab bars complying with 604.5.
2. In residential dwelling units, grab bars shall not be required to be installed in toilet or bathrooms provided that reinforcement has been installed in walls and located so as to permit the installation of grab bars complying with 604.5.
3. In detention or correction facilities, grab bars shall not be required to be installed in housing or holding cells that are specially designed without protrusions for purposes of suicide prevention.
49
In residential dwelling units, grab bars shall not be required to be installed in toilet or bathrooms provided that _____________ has been installed in walls and located so as to permit the installation of grab bars complying with 604.5.
REINFORCEMENT
604.5 Water Closets and Toilet Compartments, Grab Bars - Grab bars for water closets shall comply with 609. Grab bars shall be provided on the side wall closest to the water closet and on the rear wall.
EXCEPTIONS:
1. Grab bars shall not be required to be installed in a toilet room for a single occupant accessed only through a private office and not for common use or public use provided that reinforcement has been installed in walls and located so as to permit the installation of grab bars complying with 604.5.
2. In residential dwelling units, grab bars shall not be required to be installed in toilet or bathrooms provided that reinforcement has been installed in walls and located so as to permit the installation of grab bars complying with 604.5.
3. In detention or correction facilities, grab bars shall not be required to be installed in housing or holding cells that are specially designed without protrusions for purposes of suicide prevention.
50
In detention or correction facilities, grab bars shall not be required to be installed in housing or holding cells that are specially designed without protrusions for purposes of _______ __________.
SUICIDE PREVENTION
604.5 Water Closets and Toilet Compartments, Grab Bars - Grab bars for water closets shall comply with 609. Grab bars shall be provided on the side wall closest to the water closet and on the rear wall.
EXCEPTIONS:
1. Grab bars shall not be required to be installed in a toilet room for a single occupant accessed only through a private office and not for common use or public use provided that reinforcement has been installed in walls and located so as to permit the installation of grab bars complying with 604.5.
2. In residential dwelling units, grab bars shall not be required to be installed in toilet or bathrooms provided that reinforcement has been installed in walls and located so as to permit the installation of grab bars complying with 604.5.
3. In detention or correction facilities, grab bars shall not be required to be installed in housing or holding cells that are specially designed without protrusions for purposes of suicide prevention.
51
The side wall grab bar shall be ____ inches long minimum, located ____ inches maximum from the rear wall and extending ____ inches minimum from the rear wall.
42 INCHES LONG MINIMUM, 12 INCHES MAXIMUM, 54 INCHES MINIMUM
604.5.1 Water Closets and Toilet Compartments, Side Wall - The side wall grab bar shall be 42 inches (1065 mm) long minimum, located 12 inches (305 mm) maximum from the rear wall and extending 54 inches (1370 mm) minimum from the rear wall.
52
The rear wall grab bar shall be ____ inches long minimum and extend from the centerline of the water closet ____ inches minimum on one side and ____ inches minimum on the other side.
36 INCHES LONG MINIMUM, 12 INCHES MINIMUM, 24 INCHES MINIMUM
604.5.2 Water Closets and Toilet Compartments, Rear Wall - The rear wall grab bar shall be 36 inches (915 mm) long minimum and extend from the centerline of the water closet 12 inches (305 mm) minimum on one side and 24 inches (610 mm) minimum on the other side.
53
The rear grab bar shall be permitted to be ____ inches long minimum, centered on the water closet, where wall space does not permit a length of ____ inches minimum due to the location of a recessed fixture adjacent to the water closet.
24 INCHES LONG MINIMUM, 36 INCHES MINIMUM
604.5.2 Water Closets and Toilet Compartments, Rear Wall - The rear wall grab bar shall be 36 inches (915 mm) long minimum and extend from the centerline of the water closet 12 inches (305 mm) minimum on one side and 24 inches (610 mm) minimum on the other side.
EXCEPTIONS:
1. The rear grab bar shall be permitted to be 24 inches (610 mm) long minimum, centered on the water closet, where wall space does not permit a length of 36 inches (915 mm) minimum due to the location of a recessed fixture adjacent to the water closet.
2. Where an administrative authority requires flush controls for flush valves to be located in a position that conflicts with the location of the rear grab bar, then the rear grab bar shall be permitted to be split or shifted to the open side of the toilet area.
54
Where an administrative authority requires flush controls for flush valves to be located in a position that conflicts with the location of the rear grab bar, then the rear grab bar shall be permitted to be _____ or _______ to the open side of the toilet area.
SPLIT, SHIFTED
604.5.2 Water Closets and Toilet Compartments, Rear Wall - The rear wall grab bar shall be 36 inches (915 mm) long minimum and extend from the centerline of the water closet 12 inches (305 mm) minimum on one side and 24 inches (610 mm) minimum on the other side.
EXCEPTIONS:
1. The rear grab bar shall be permitted to be 24 inches (610 mm) long minimum, centered on the water closet, where wall space does not permit a length of 36 inches (915 mm) minimum due to the location of a recessed fixture adjacent to the water closet.
2. Where an administrative authority requires flush controls for flush valves to be located in a position that conflicts with the location of the rear grab bar, then the rear grab bar shall be permitted to be split or shifted to the open side of the toilet area.
55
Flush controls shall be ____ ________ or _______.
HAND OPERATED, AUTOMATIC
604.6 Water Closets and Toilet Compartments, Flush Controls - Flush controls shall be hand operated or automatic. Hand operated flush controls shall comply with 309. Flush controls shall be located on the open side of the water closet except in ambulatory accessible compartments complying with 604.8.2.
56
Water closet and toilet compartment hand operated flush controls shall not require _____ ________, ________, or ________ __ ___ _____.
TIGHT GRASPING, PINCHING, TWISTING OF THE WRIST
604.6 Water Closets and Toilet Compartments, Flush Controls - Flush controls shall be hand operated or automatic. Hand operated flush controls shall comply with 309. Flush controls shall be located on the open side of the water closet except in ambulatory accessible compartments complying with 604.8.2.
57
T / F - Water closet and toilet compartment hand operated flush controls shall have an activating force of 5 pounds maximum.
TRUE
604.6 Water Closets and Toilet Compartments, Flush Controls - Flush controls shall be hand operated or automatic. Hand operated flush controls shall comply with 309. Flush controls shall be located on the open side of the water closet except in ambulatory accessible compartments complying with 604.8.2.
58
Flush controls shall be located on the ____ side of the water closet except in ambulatory accessible compartments complying with 604.8.2.
OPEN
604.6 Water Closets and Toilet Compartments, Flush Controls - Flush controls shall be hand operated or automatic. Hand operated flush controls shall comply with 309. Flush controls shall be located on the open side of the water closet except in ambulatory accessible compartments complying with 604.8.2.
59
Toilet paper dispensers shall comply with 309.4 and shall be ____ inches minimum and ____ inches maximum in front of the water closet measured to the __________ of the dispenser.
7 INCHES MINIMUM, 9 INCHES MAXIMUM, CENTERLINE
604.7 Water Closets and Toilet Compartments, Dispensers - Toilet paper dispensers shall comply with 309.4 and shall be 7 inches (180 mm) minimum and 9 inches (230 mm) maximum in front of the water closet measured to the centerline of the dispenser. The outlet of the dispenser shall be 15 inches (380 mm) minimum and 48 inches (1220 mm) maximum above the finish floor and shall not be located behind grab bars. Dispensers shall not be of a type that controls delivery or that does not allow continuous paper flow.
60
The outlet of the dispenser shall be ____ inches minimum and ____ inches maximum above the finish floor and shall not be located behind ____ ____.
15 INCHES MINIMUM, 48 INCHES MAXIMUM, GRAB BARS
604.7 Water Closets and Toilet Compartments, Dispensers - Toilet paper dispensers shall comply with 309.4 and shall be 7 inches (180 mm) minimum and 9 inches (230 mm) maximum in front of the water closet measured to the centerline of the dispenser. The outlet of the dispenser shall be 15 inches (380 mm) minimum and 48 inches (1220 mm) maximum above the finish floor and shall not be located behind grab bars. Dispensers shall not be of a type that controls delivery or that does not allow continuous paper flow.
61
Dispensers shall not be of a type that ________ ________ or that does not allow __________ paper flow.
CONTROLS DELIVERY, CONTINUOUS
604.7 Water Closets and Toilet Compartments, Dispensers - Toilet paper dispensers shall comply with 309.4 and shall be 7 inches (180 mm) minimum and 9 inches (230 mm) maximum in front of the water closet measured to the centerline of the dispenser. The outlet of the dispenser shall be 15 inches (380 mm) minimum and 48 inches (1220 mm) maximum above the finish floor and shall not be located behind grab bars. Dispensers shall not be of a type that controls delivery or that does not allow continuous paper flow.
62
Wheelchair accessible toilet compartments shall meet the requirements of 604.8.1 - __________ __________ ____________ and 604.8.3 - ____ _____ ___ _______.
WHEELCHAIR ACCESSIBLE COMPARTMENTS, COAT HOOKS AND SHELVES
604.8 Water Closets and Toilet Compartments, Toilet Compartments - Wheelchair accessible toilet compartments shall meet the requirements of 604.8.1 and 604.8.3. Compartments containing more than one plumbing fixture shall comply with 603. Ambulatory accessible compartments shall comply with 604.8.2 and 604.8.3.
63
Compartments containing more than ___ plumbing fixture shall comply with 603 - ______ ___ _______ _____.
ONE, TOILET AND BATHING ROOMS
604.8 Water Closets and Toilet Compartments, Toilet Compartments - Wheelchair accessible toilet compartments shall meet the requirements of 604.8.1 and 604.8.3. Compartments containing more than one plumbing fixture shall comply with 603. Ambulatory accessible compartments shall comply with 604.8.2 and 604.8.3.
64
Ambulatory accessible compartments shall comply with 604.8.2 - __________ __________ ____________ and 604.8.3 - ____ _____ ___ _______.
AMBULATORY ACCESSIBLE COMPARTMENTS, COAT HOOKS AND SHELVES
604.8 Water Closets and Toilet Compartments, Toilet Compartments - Wheelchair accessible toilet compartments shall meet the requirements of 604.8.1 and 604.8.3. Compartments containing more than one plumbing fixture shall comply with 603. Ambulatory accessible compartments shall comply with 604.8.2 and 604.8.3.
65
Wheelchair accessible compartments shall be ____ inches wide minimum measured perpendicular to the side wall, and ____ inches deep minimum for wall hung water closets and ____ inches deep minimum for floor mounted water closets measured perpendicular to the rear wall.
60 INCHES, 56 INCHES, 59 INCHES
604.8.1.1 Wheelchair Accessible Compartments, Size - Wheelchair accessible compartments shall be 60 inches (1525 mm) wide minimum measured perpendicular to the side wall, and 56 inches (1420 mm) deep minimum for wall hung water closets and 59 inches (1500 mm) deep minimum for floor mounted water closets measured perpendicular to the rear wall. Wheelchair accessible compartments for children's use shall be 60 inches (1525 mm) wide minimum measured perpendicular to the side wall, and 59 inches (1500 mm) deep minimum for wall hung and floor mounted water closets measured perpendicular to the rear wall.
66
Wheelchair accessible compartments for __________ use shall be ____ inches wide minimum measured perpendicular to the side wall, and ____inches deep minimum for wall hung and floor mounted water closets measured perpendicular to the rear wall.
CHILDREN'S, 60 INCHES, 59 INCHES
604.8.1.1 Wheelchair Accessible Compartments, Size - Wheelchair accessible compartments shall be 60 inches (1525 mm) wide minimum measured perpendicular to the side wall, and 56 inches (1420 mm) deep minimum for wall hung water closets and 59 inches (1500 mm) deep minimum for floor mounted water closets measured perpendicular to the rear wall. Wheelchair accessible compartments for children's use shall be 60 inches (1525 mm) wide minimum measured perpendicular to the side wall, and 59 inches (1500 mm) deep minimum for wall hung and floor mounted water closets measured perpendicular to the rear wall.
67
Toilet compartment doors, including door hardware, shall comply with 404 - _____, ________, ___ _____ except that if the approach is to the latch side of the compartment door, clearance between the door side of the compartment and any obstruction shall be ____ inches (1065 mm) minimum.
DOORS, DOORWAYS, AND GATES; 42 INCHES MINIMUM
604.8.1.2 Wheelchair Accessible Compartments, Doors - Toilet compartment doors, including door hardware, shall comply with 404 except that if the approach is to the latch side of the compartment door, clearance between the door side of the compartment and any obstruction shall be 42 inches (1065 mm) minimum. Doors shall be located in the front partition or in the side wall or partition farthest from the water closet. Where located in the front partition, the door opening shall be 4 inches (100 mm) maximum from the side wall or partition farthest from the water closet. Where located in the side wall or partition, the door opening shall be 4 inches (100 mm) maximum from the front partition. The door shall be self-closing. A door pull complying with 404.2.7 shall be placed on both sides of the door near the latch. Toilet compartment doors shall not swing into the minimum required compartment area.
68
Wheelchair accessible compartment doors shall be located in the _____ partition or in the ____ ____ or partition ________ from the water closet.
FRONT, SIDE WALL, FARTHEST
604.8.1.2 Wheelchair Accessible Compartments, Doors - Toilet compartment doors, including door hardware, shall comply with 404 except that if the approach is to the latch side of the compartment door, clearance between the door side of the compartment and any obstruction shall be 42 inches (1065 mm) minimum. Doors shall be located in the front partition or in the side wall or partition farthest from the water closet. Where located in the front partition, the door opening shall be 4 inches (100 mm) maximum from the side wall or partition farthest from the water closet. Where located in the side wall or partition, the door opening shall be 4 inches (100 mm) maximum from the front partition. The door shall be self-closing. A door pull complying with 404.2.7 shall be placed on both sides of the door near the latch. Toilet compartment doors shall not swing into the minimum required compartment area.
69
Where located in the front partition, the door opening of a wheelchair accessible compartment shall be ____ inches maximum from the side wall or partition ________ from the water closet.
4 INCHES MAXIMUM, FARTHEST
604.8.1.2 Wheelchair Accessible Compartments, Doors - Toilet compartment doors, including door hardware, shall comply with 404 except that if the approach is to the latch side of the compartment door, clearance between the door side of the compartment and any obstruction shall be 42 inches (1065 mm) minimum. Doors shall be located in the front partition or in the side wall or partition farthest from the water closet. Where located in the front partition, the door opening shall be 4 inches (100 mm) maximum from the side wall or partition farthest from the water closet. Where located in the side wall or partition, the door opening shall be 4 inches (100 mm) maximum from the front partition. The door shall be self-closing. A door pull complying with 404.2.7 shall be placed on both sides of the door near the latch. Toilet compartment doors shall not swing into the minimum required compartment area.
70
Where located in the side wall or partition, the door of a wheelchair accessible compartment opening shall be ____ inches maximum from the _____ partition.
4 INCHES MAXIMUM, FRONT
604.8.1.2 Wheelchair Accessible Compartments, Doors - Toilet compartment doors, including door hardware, shall comply with 404 except that if the approach is to the latch side of the compartment door, clearance between the door side of the compartment and any obstruction shall be 42 inches (1065 mm) minimum. Doors shall be located in the front partition or in the side wall or partition farthest from the water closet. Where located in the front partition, the door opening shall be 4 inches (100 mm) maximum from the side wall or partition farthest from the water closet. Where located in the side wall or partition, the door opening shall be 4 inches (100 mm) maximum from the front partition. The door shall be self-closing. A door pull complying with 404.2.7 shall be placed on both sides of the door near the latch. Toilet compartment doors shall not swing into the minimum required compartment area.
71
The door of a wheelchair accessible compartment shall be ____-_______.
SELF-CLOSING
604.8.1.2 Wheelchair Accessible Compartments, Doors - Toilet compartment doors, including door hardware, shall comply with 404 except that if the approach is to the latch side of the compartment door, clearance between the door side of the compartment and any obstruction shall be 42 inches (1065 mm) minimum. Doors shall be located in the front partition or in the side wall or partition farthest from the water closet. Where located in the front partition, the door opening shall be 4 inches (100 mm) maximum from the side wall or partition farthest from the water closet. Where located in the side wall or partition, the door opening shall be 4 inches (100 mm) maximum from the front partition. The door shall be self-closing. A door pull complying with 404.2.7 shall be placed on both sides of the door near the latch. Toilet compartment doors shall not swing into the minimum required compartment area.
72
At wheelchair accessible compartment doors, a door pull complying with 404.2.7 (Door and Gate Hardware) shall be placed on ____ _____ of the door near the latch.
BOTH SIDES
604.8.1.2 Wheelchair Accessible Compartments, Doors - Toilet compartment doors, including door hardware, shall comply with 404 except that if the approach is to the latch side of the compartment door, clearance between the door side of the compartment and any obstruction shall be 42 inches (1065 mm) minimum. Doors shall be located in the front partition or in the side wall or partition farthest from the water closet. Where located in the front partition, the door opening shall be 4 inches (100 mm) maximum from the side wall or partition farthest from the water closet. Where located in the side wall or partition, the door opening shall be 4 inches (100 mm) maximum from the front partition. The door shall be self-closing. A door pull complying with 404.2.7 shall be placed on both sides of the door near the latch. Toilet compartment doors shall not swing into the minimum required compartment area.
73
Wheelchair accessible toilet compartment doors shall not swing into the _______ required ____________ area.
MINIMUM, COMPARTMENT
604.8.1.2 Wheelchair Accessible Compartments, Doors - Toilet compartment doors, including door hardware, shall comply with 404 except that if the approach is to the latch side of the compartment door, clearance between the door side of the compartment and any obstruction shall be 42 inches (1065 mm) minimum. Doors shall be located in the front partition or in the side wall or partition farthest from the water closet. Where located in the front partition, the door opening shall be 4 inches (100 mm) maximum from the side wall or partition farthest from the water closet. Where located in the side wall or partition, the door opening shall be 4 inches (100 mm) maximum from the front partition. The door shall be self-closing. A door pull complying with 404.2.7 shall be placed on both sides of the door near the latch. Toilet compartment doors shall not swing into the minimum required compartment area.
74
Wheelchair accessible compartments shall be arranged for ____-____ or _____-____ approach to the water closet.
LEFT-HAND, RIGHT-HAND
604.8.1.3 Wheelchair Accessible Compartments, Approach - Compartments shall be arranged for left-hand or right-hand approach to the water closet.
75
The front partition and at least one side partition of a wheelchair accessible compartment shall provide a toe clearance of ____ inches minimum above the finish floor and ____ inches deep minimum beyond the compartment-side face of the partition, exclusive of partition support members.
9 INCHES MINIMUM, 6 INCHES DEEP MINIMUM
604.8.1.4 Wheelchair Accessible Compartments, Toe Clearance - The front partition and at least one side partition shall provide a toe clearance of 9 inches (230 mm) minimum above the finish floor and 6 inches (150 mm) deep minimum beyond the compartment-side face of the partition, exclusive of partition support members. Compartments for children's use shall provide a toe clearance of 12 inches (305 mm) minimum above the finish floor.
76
Wheelchair accessible compartments for children's use shall provide a toe clearance of ____ inches minimum above the finish floor.
12 INCHES MINIMUM
604.8.1.4 Wheelchair Accessible Compartments, Toe Clearance - The front partition and at least one side partition shall provide a toe clearance of 9 inches (230 mm) minimum above the finish floor and 6 inches (150 mm) deep minimum beyond the compartment-side face of the partition, exclusive of partition support members. Compartments for children's use shall provide a toe clearance of 12 inches (305 mm) minimum above the finish floor.
77
Toe clearance at the front partition of a wheelchair accessible compartment is not required in a compartment greater than ____ inches deep with a ____-____ water closet or ____ inches deep with a _____-_______ water closet.
62 INCHES; WALL-HUNG 65 INCHES; FLOOR-MOUNTED
604.8.1.4 Wheelchair Accessible Compartments, Toe Clearance - The front partition and at least one side partition shall provide a toe clearance of 9 inches (230 mm) minimum above the finish floor and 6 inches (150 mm) deep minimum beyond the compartment-side face of the partition, exclusive of partition support members. Compartments for children's use shall provide a toe clearance of 12 inches (305 mm) minimum above the finish floor.
EXCEPTION: Toe clearance at the front partition is not required in a compartment greater than 62 inches (1575 mm) deep with a wall-hung water closet or 65 inches (1650 mm) deep with a floor-mounted water closet. Toe clearance at the side partition is not required in a compartment greater than 66 inches (1675 mm) wide. Toe clearance at the front partition is not required in a compartment for children's use that is greater than 65 inches (1650 mm) deep.
78
Toe clearance at the side partition of a wheelchair accessible compartment is not required in a compartment greater than ____ inches wide.
66 INCHES
604.8.1.4 Wheelchair Accessible Compartments, Toe Clearance - The front partition and at least one side partition shall provide a toe clearance of 9 inches (230 mm) minimum above the finish floor and 6 inches (150 mm) deep minimum beyond the compartment-side face of the partition, exclusive of partition support members. Compartments for children's use shall provide a toe clearance of 12 inches (305 mm) minimum above the finish floor.
EXCEPTION: Toe clearance at the front partition is not required in a compartment greater than 62 inches (1575 mm) deep with a wall-hung water closet or 65 inches (1650 mm) deep with a floor-mounted water closet. Toe clearance at the side partition is not required in a compartment greater than 66 inches (1675 mm) wide. Toe clearance at the front partition is not required in a compartment for children's use that is greater than 65 inches (1650 mm) deep.
79
Toe clearance at the front partition of a wheelchair accessible compartment is not required in a compartment for __________ use that is greater than ____ inches deep.
CHILDREN'S; 65 INCHES
604.8.1.4 Wheelchair Accessible Compartments, Toe Clearance - The front partition and at least one side partition shall provide a toe clearance of 9 inches (230 mm) minimum above the finish floor and 6 inches (150 mm) deep minimum beyond the compartment-side face of the partition, exclusive of partition support members. Compartments for children's use shall provide a toe clearance of 12 inches (305 mm) minimum above the finish floor.
EXCEPTION: Toe clearance at the front partition is not required in a compartment greater than 62 inches (1575 mm) deep with a wall-hung water closet or 65 inches (1650 mm) deep with a floor-mounted water closet. Toe clearance at the side partition is not required in a compartment greater than 66 inches (1675 mm) wide. Toe clearance at the front partition is not required in a compartment for children's use that is greater than 65 inches (1650 mm) deep.
80
Grab bars shall comply with 609 - ____ ____.
GRAB BARS
604.8.1.5 Wheelchair Accessible Compartments, Grab Bars - Grab bars shall comply with 609. A side-wall grab bar complying with 604.5.1 shall be provided and shall be located on the wall closest to the water closet. In addition, a rear-wall grab bar complying with 604.5.2 shall be provided.
81
In wheelchair accessible compartments, a ____-_____ grab bar complying with 604.5.1 (____ ____ ____ ____) shall be provided and shall be located on the wall _______ to the water closet.
SIDE-WALL; SIDE WALL GRAB BARS; CLOSEST
604.8.1.5 Wheelchair Accessible Compartments, Grab Bars - Grab bars shall comply with 609. A side-wall grab bar complying with 604.5.1 shall be provided and shall be located on the wall closest to the water closet. In addition, a rear-wall grab bar complying with 604.5.2 shall be provided.
82
In wheelchair accessible compartments, a ____-____ grab bar complying with 604.5.2 (____ ____ ____ ____) shall be provided.
REAR-WALL, REAR WALL GRAB BARS
604.8.1.5 Wheelchair Accessible Compartments, Grab Bars - Grab bars shall comply with 609. A side-wall grab bar complying with 604.5.1 shall be provided and shall be located on the wall closest to the water closet. In addition, a rear-wall grab bar complying with 604.5.2 shall be provided.
83
Ambulatory accessible compartments shall have a depth of ____ inches minimum and a width of ____ inches minimum and ____ inches maximum.
60 INCHES MINIMUM; 35 INCHES MINIMUM; 37 INCHES MAXIMUM
604.8.2.1 Ambulatory Accessible Compartments, Size - Ambulatory accessible compartments shall have a depth of 60 inches (1525 mm) minimum and a width of 35 inches (890 mm) minimum and 37 inches (940 mm) maximum.
84
Ambulatory accessible toilet compartment doors, including door hardware, shall comply with 404 (Doors, Doorways, and Gates), except that if the approach is to the _____ side of the compartment door, clearance between the door side of the compartment and any obstruction shall be ____ inches minimum.
LATCH; 42 INCHES MINIMUM
604.8.2.2 Ambulatory Accessible Compartments, Doors - Toilet compartment doors, including door hardware, shall comply with 404, except that if the approach is to the latch side of the compartment door, clearance between the door side of the compartment and any obstruction shall be 42 inches (1065 mm) minimum. The door shall be self-closing. A door pull complying with 404.2.7 shall be placed on both sides of the door near the latch. Toilet compartment doors shall not swing into the minimum required compartment area.
85
The door of an ambulatory accessible compartment shall be ____-_______.
SELF-CLOSING
604.8.2.2 Ambulatory Accessible Compartments, Doors - Toilet compartment doors, including door hardware, shall comply with 404, except that if the approach is to the latch side of the compartment door, clearance between the door side of the compartment and any obstruction shall be 42 inches (1065 mm) minimum. The door shall be self-closing. A door pull complying with 404.2.7 shall be placed on both sides of the door near the latch. Toilet compartment doors shall not swing into the minimum required compartment area.
86
At ambulatory accessible compartments, a door pull complying with 404.2.7 (Door and Gate Hardware) shall be placed on ____ sides of the door near the _____.
BOTH; LATCH
604.8.2.2 Ambulatory Accessible Compartments, Doors - Toilet compartment doors, including door hardware, shall comply with 404, except that if the approach is to the latch side of the compartment door, clearance between the door side of the compartment and any obstruction shall be 42 inches (1065 mm) minimum. The door shall be self-closing. A door pull complying with 404.2.7 shall be placed on both sides of the door near the latch. Toilet compartment doors shall not swing into the minimum required compartment area.
87
Ambulatory accessible toilet compartment doors shall not swing into the minimum required ___________ area.
COMPARTMENT
604.8.2.2 Ambulatory Accessible Compartments, Doors - Toilet compartment doors, including door hardware, shall comply with 404, except that if the approach is to the latch side of the compartment door, clearance between the door side of the compartment and any obstruction shall be 42 inches (1065 mm) minimum. The door shall be self-closing. A door pull complying with 404.2.7 shall be placed on both sides of the door near the latch. Toilet compartment doors shall not swing into the minimum required compartment area.
88
Grab bars shall comply with 609 (Grab Bars). A side-wall grab bar complying with 604.5.1 shall be provided on ____ sides of the compartment.
BOTH
604.8.2.3 Ambulatory Accessible Compartments, Grab Bars - Grab bars shall comply with 609. A side-wall grab bar complying with 604.5.1 shall be provided on both sides of the compartment.
89
T / F - At ambulatory accessible compartments, coat hooks shall not be required to be located within one of the reach ranges specified in 308.
FALSE
604.8.3 Ambulatory Accessible Compartments, Coat Hooks and Shelves - Coat hooks shall be located within one of the reach ranges specified in 308. Shelves shall be located 40 inches (1015 mm) minimum and 48 inches (1220 mm) maximum above the finish floor.
90
At ambulatory accessible compartments, shelves shall be located ____ inches minimum and ____ inches maximum above the finish floor.
40 INCHES MINIMUM; 48 INCHES MAXIMUM
604.8.3 Ambulatory Accessible Compartments, Coat Hooks and Shelves - Coat hooks shall be located within one of the reach ranges specified in 308. Shelves shall be located 40 inches (1015 mm) minimum and 48 inches (1220 mm) maximum above the finish floor.
91
The water closet for children's use shall be located with a wall or partition to the ____ and to ___ side.
REAR; ONE
604.9.1 Water Closets and Toilet Compartments for Children's Use, Location - The water closet shall be located with a wall or partition to the rear and to one side. The centerline of the water closet shall be 12 inches (305 mm) minimum and 18 inches (455 mm) maximum from the side wall or partition, except that the water closet shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum from the side wall or partition in the ambulatory accessible toilet compartment specified in 604.8.2. Compartments shall be arranged for left-hand or right-hand approach to the water closet.
92
The centerline of the children's use water closet shall be ____ inches minimum and ____ inches maximum from the side wall or partition, except that the water closet shall be ____ inches minimum and ____ inches maximum from the side wall or partition in the ambulatory accessible toilet compartment specified in 604.8.2.
12 INCHES MINIMUM; 18 INCHES MAXIMUM; 17 INCHES MINIMUM; 19 INCHES MAXIMUM
604.9.1 Water Closets and Toilet Compartments for Children's Use, Location - The water closet shall be located with a wall or partition to the rear and to one side. The centerline of the water closet shall be 12 inches (305 mm) minimum and 18 inches (455 mm) maximum from the side wall or partition, except that the water closet shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum from the side wall or partition in the ambulatory accessible toilet compartment specified in 604.8.2. Compartments shall be arranged for left-hand or right-hand approach to the water closet.
93
Children's use water closet and toilet compartments shall be arranged for ____-____or _____-____ approach to the water closet.
LEFT-HAND; RIGHT-HAND
604.9.1 Water Closets and Toilet Compartments for Children's Use, Location - The water closet shall be located with a wall or partition to the rear and to one side. The centerline of the water closet shall be 12 inches (305 mm) minimum and 18 inches (455 mm) maximum from the side wall or partition, except that the water closet shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum from the side wall or partition in the ambulatory accessible toilet compartment specified in 604.8.2. Compartments shall be arranged for left-hand or right-hand approach to the water closet.
94
The height of water closets for children's use shall be ____ inches minimum and ____ inches maximum measured to the top of the seat.
11 INCHES MINIMUM; 17 INCHES MAXIMUM
604.9.3 Water Closets and Toilet Compartments for Children's Use, Height - The height of water closets shall be 11 inches (280 mm) minimum and 17 inches (430 mm) maximum measured to the top of the seat. Seats shall not be sprung to return to a lifted position.
95
Seats at children's use water closets shall not be ______ to ______ to a lifted position.
SPRUNG; RETURN
604.9.3 Water Closets and Toilet Compartments for Children's Use, Height - The height of water closets shall be 11 inches (280 mm) minimum and 17 inches (430 mm) maximum measured to the top of the seat. Seats shall not be sprung to return to a lifted position.
96
Flush controls at water closets for children's use shall be ____ ________ or _______.
HAND OPERATED; AUTOMATIC
604.9.5 Water Closets and Toilet Compartments for Children's Use, Flush Controls - Flush controls shall be hand operated or automatic. Hand operated flush controls shall comply with 309.2 and 309.4 and shall be installed 36 inches (915 mm) maximum above the finish floor. Flush controls shall be located on the open side of the water closet except in ambulatory accessible compartments complying with 604.8.2.
97
Hand operated flush controls at water closets for children's use shall comply with 309.2 and 309.4 and shall be installed ____ inches maximum above the finish floor.
36 INCHES MAXIMUM
604.9.5 Water Closets and Toilet Compartments for Children's Use, Flush Controls - Flush controls shall be hand operated or automatic. Hand operated flush controls shall comply with 309.2 and 309.4 and shall be installed 36 inches (915 mm) maximum above the finish floor. Flush controls shall be located on the open side of the water closet except in ambulatory accessible compartments complying with 604.8.2.
98
Flush controls at water closets for children's use shall be located on the ____ side of the water closet except in __________ accessible compartments complying with 604.8.2.
OPEN; AMBULATORY
604.9.5 Water Closets and Toilet Compartments for Children's Use, Flush Controls - Flush controls shall be hand operated or automatic. Hand operated flush controls shall comply with 309.2 and 309.4 and shall be installed 36 inches (915 mm) maximum above the finish floor. Flush controls shall be located on the open side of the water closet except in ambulatory accessible compartments complying with 604.8.2.
99
At water closets and toilet compartments for children's use, toilet paper dispensers shall comply with 309.4 and shall be ____ inches minimum and ____ inches maximum in front of the water closet measured to the __________ of the dispenser.
7 INCHES MINIMUM; 9 INCHES MAXIMUM; CENTERLINE
604.9.6 Water Closets and Toilet Compartments for Children's Use, Dispensers - Toilet paper dispensers shall comply with 309.4 and shall be 7 inches (180 mm) minimum and 9 inches (230 mm) maximum in front of the water closet measured to the centerline of the dispenser. The outlet of the dispenser shall be 14 inches (355 mm) minimum and 19 inches (485 mm) maximum above the finish floor. There shall be a clearance of 1 1/2 inches (38 mm) minimum below the grab bar. Dispensers shall not be of a type that controls delivery or that does not allow continuous paper flow.
100
At water closets and toilet compartments for children's use, the outlet of the dispenser shall be ____ inches minimum and ____ inches maximum above the finish floor.
14 INCHES MINIMUM; 19 INCHES MAXIMUM
604.9.6 Water Closets and Toilet Compartments for Children's Use, Dispensers - Toilet paper dispensers shall comply with 309.4 and shall be 7 inches (180 mm) minimum and 9 inches (230 mm) maximum in front of the water closet measured to the centerline of the dispenser. The outlet of the dispenser shall be 14 inches (355 mm) minimum and 19 inches (485 mm) maximum above the finish floor. There shall be a clearance of 1 1/2 inches (38 mm) minimum below the grab bar. Dispensers shall not be of a type that controls delivery or that does not allow continuous paper flow.
101
At water closets and toilet compartments for children's use, there shall be a clearance of _____ inches minimum below the grab bar to dispensers.
1 1/2 INCHES MINIMUM
604.9.6 Water Closets and Toilet Compartments for Children's Use, Dispensers - Toilet paper dispensers shall comply with 309.4 and shall be 7 inches (180 mm) minimum and 9 inches (230 mm) maximum in front of the water closet measured to the centerline of the dispenser. The outlet of the dispenser shall be 14 inches (355 mm) minimum and 19 inches (485 mm) maximum above the finish floor. There shall be a clearance of 1 1/2 inches (38 mm) minimum below the grab bar. Dispensers shall not be of a type that controls delivery or that does not allow continuous paper flow.
102
Dispensers at water closets and toilet compartments for children's use shall not be of a type that controls ________ or that does not allow __________ paper flow.
DELIVERY; CONTINUOUS
604.9.6 Water Closets and Toilet Compartments for Children's Use, Dispensers - Toilet paper dispensers shall comply with 309.4 and shall be 7 inches (180 mm) minimum and 9 inches (230 mm) maximum in front of the water closet measured to the centerline of the dispenser. The outlet of the dispenser shall be 14 inches (355 mm) minimum and 19 inches (485 mm) maximum above the finish floor. There shall be a clearance of 1 1/2 inches (38 mm) minimum below the grab bar. Dispensers shall not be of a type that controls delivery or that does not allow continuous paper flow.
103
Urinals shall be the _____-____ or the ____-____ type with the rim ____ inches maximum above the finish floor or ground.
STALL-TYPE; WALL-HUNG; 17 INCHES MAXIMUM
605.2 Urinals, Height and Depth - Urinals shall be the stall-type or the wall-hung type with the rim 17 inches (430 mm) maximum above the finish floor or ground. Urinals shall be 13 1/2 inches (345 mm) deep minimum measured from the outer face of the urinal rim to the back of the fixture.
104
Urinals shall be 13 1/2 inches (345 mm) deep minimum measured from the outer face of the urinal rim to the back of the fixture.
605.2 Urinals, Height and Depth - Urinals shall be the stall-type or the wall-hung type with the rim 17 inches (430 mm) maximum above the finish floor or ground. Urinals shall be 13 1/2 inches (345 mm) deep minimum measured from the outer face of the urinal rim to the back of the fixture.
105
At urinals, a clear floor or ground space complying with 305 positioned for _______ approach shall be provided.
FORWARD
605.3 Urinals, Clear Floor Space - A clear floor or ground space complying with 305 positioned for forward approach shall be provided.
106
Flush controls at urinals shall be ____ ________ or _______.
HAND OPERATED; AUTOMATIC
605.4 Urinals, Flush Controls - Flush controls shall be hand operated or automatic. Hand operated flush controls shall comply with 309.
107
At urinals, hand operated flush controls shall not require _____ ________, ________, or ________ __ ___ _____.
TIGHT GRASPING; PINCHING; TWISTING OF THE WRIST
605.4 Urinals, Flush Controls - Flush controls shall be hand operated or automatic. Hand operated flush controls shall comply with 309.
108
At lavatories and sinks, a clear floor space complying with 305, positioned for a _______ approach, and ____ and ___ clearance complying with 306 shall be provided.
FORWARD; KNEE; TOE
606.2 Lavatories and Sinks, Clear Floor Space - A clear floor space complying with 305, positioned for a forward approach, and knee and toe clearance complying with 306 shall be provided.
109
A ________ approach complying with 305 shall be permitted to a kitchen sink in a space where a ____ ___ or __________ _____ is not provided and to ___ ____.
PARALLEL; COOK TOP; CONVENTIONAL RANGE; WET BARS
606.2 Lavatories and Sinks, Clear Floor Space - A clear floor space complying with 305, positioned for a forward approach, and knee and toe clearance complying with 306 shall be provided.
EXCEPTIONS:
1. A parallel approach complying with 305 shall be permitted to a kitchen sink in a space where a cook top or conventional range is not provided and to wet bars.
2. A lavatory in a toilet room or bathing facility for a single occupant accessed only through a private office and not for common use or public use shall not be required to provide knee and toe clearance complying with 306.
3. In residential dwelling units, cabinetry shall be permitted under lavatories and kitchen sinks provided that all of the following conditions are met:
(a) the cabinetry can be removed without removal or replacement of the fixture;
(b) the finish floor extends under the cabinetry; and
(c) the walls behind and surrounding the cabinetry are finished.
4. A knee clearance of 24 inches (610 mm) minimum above the finish floor or ground shall be permitted at lavatories and sinks used primarily by children 6 through 12 years where the rim or counter surface is 31 inches (785 mm) maximum above the finish floor or ground.
5. A parallel approach complying with 305 shall be permitted to lavatories and sinks used primarily by children 5 years and younger.
6. The dip of the overflow shall not be considered in determining knee and toe clearances.
7. No more than one bowl of a multi-bowl sink shall be required to provide knee and toe clearance complying with 306.
110
A lavatory in a toilet room or bathing facility for a single occupant accessed only through a _______ ______ and not for common use or public use shall not be required to provide ____ and ___ clearance complying with 306.
PRIVATE OFFICE; KNEE; TOE
606.2 Lavatories and Sinks, Clear Floor Space - A clear floor space complying with 305, positioned for a forward approach, and knee and toe clearance complying with 306 shall be provided.
EXCEPTIONS:
1. A parallel approach complying with 305 shall be permitted to a kitchen sink in a space where a cook top or conventional range is not provided and to wet bars.
2. A lavatory in a toilet room or bathing facility for a single occupant accessed only through a private office and not for common use or public use shall not be required to provide knee and toe clearance complying with 306.
3. In residential dwelling units, cabinetry shall be permitted under lavatories and kitchen sinks provided that all of the following conditions are met:
(a) the cabinetry can be removed without removal or replacement of the fixture;
(b) the finish floor extends under the cabinetry; and
(c) the walls behind and surrounding the cabinetry are finished.
4. A knee clearance of 24 inches (610 mm) minimum above the finish floor or ground shall be permitted at lavatories and sinks used primarily by children 6 through 12 years where the rim or counter surface is 31 inches (785 mm) maximum above the finish floor or ground.
5. A parallel approach complying with 305 shall be permitted to lavatories and sinks used primarily by children 5 years and younger.
6. The dip of the overflow shall not be considered in determining knee and toe clearances.
7. No more than one bowl of a multi-bowl sink shall be required to provide knee and toe clearance complying with 306.
111
In residential dwelling units, cabinetry shall be permitted under lavatories and kitchen sinks provided that all of the following conditions are met:
(a) the cabinetry can be _______ without removal or replacement of the fixture;
(b) the ______ _____ extends under the cabinetry; and
(c) the walls behind and surrounding the cabinetry are ________.
REMOVED; FINISHED FLOOR; FINISHED
606.2 Lavatories and Sinks, Clear Floor Space - A clear floor space complying with 305, positioned for a forward approach, and knee and toe clearance complying with 306 shall be provided.
EXCEPTIONS:
1. A parallel approach complying with 305 shall be permitted to a kitchen sink in a space where a cook top or conventional range is not provided and to wet bars.
2. A lavatory in a toilet room or bathing facility for a single occupant accessed only through a private office and not for common use or public use shall not be required to provide knee and toe clearance complying with 306.
3. In residential dwelling units, cabinetry shall be permitted under lavatories and kitchen sinks provided that all of the following conditions are met:
(a) the cabinetry can be removed without removal or replacement of the fixture;
(b) the finish floor extends under the cabinetry; and
(c) the walls behind and surrounding the cabinetry are finished.
4. A knee clearance of 24 inches (610 mm) minimum above the finish floor or ground shall be permitted at lavatories and sinks used primarily by children 6 through 12 years where the rim or counter surface is 31 inches (785 mm) maximum above the finish floor or ground.
5. A parallel approach complying with 305 shall be permitted to lavatories and sinks used primarily by children 5 years and younger.
6. The dip of the overflow shall not be considered in determining knee and toe clearances.
7. No more than one bowl of a multi-bowl sink shall be required to provide knee and toe clearance complying with 306.
112
A knee clearance of ____ inches minimum above the finish floor or ground shall be permitted at lavatories and sinks used primarily by children ____ through ____ years where the rim or counter surface is ____ inches maximum above the finish floor or ground.
24 INCHES; 6; 12; 31 INCHES MAXIMUM
606.2 Lavatories and Sinks, Clear Floor Space - A clear floor space complying with 305, positioned for a forward approach, and knee and toe clearance complying with 306 shall be provided.
EXCEPTIONS:
1. A parallel approach complying with 305 shall be permitted to a kitchen sink in a space where a cook top or conventional range is not provided and to wet bars.
2. A lavatory in a toilet room or bathing facility for a single occupant accessed only through a private office and not for common use or public use shall not be required to provide knee and toe clearance complying with 306.
3. In residential dwelling units, cabinetry shall be permitted under lavatories and kitchen sinks provided that all of the following conditions are met:
(a) the cabinetry can be removed without removal or replacement of the fixture;
(b) the finish floor extends under the cabinetry; and
(c) the walls behind and surrounding the cabinetry are finished.
4. A knee clearance of 24 inches (610 mm) minimum above the finish floor or ground shall be permitted at lavatories and sinks used primarily by children 6 through 12 years where the rim or counter surface is 31 inches (785 mm) maximum above the finish floor or ground.
5. A parallel approach complying with 305 shall be permitted to lavatories and sinks used primarily by children 5 years and younger.
6. The dip of the overflow shall not be considered in determining knee and toe clearances.
7. No more than one bowl of a multi-bowl sink shall be required to provide knee and toe clearance complying with 306.
113
A ________ approach complying with 305 shall be permitted to lavatories and sinks used primarily by children ____ years and _______.
PARALLEL; 5; YOUNGER
606.2 Lavatories and Sinks, Clear Floor Space - A clear floor space complying with 305, positioned for a forward approach, and knee and toe clearance complying with 306 shall be provided.
EXCEPTIONS:
1. A parallel approach complying with 305 shall be permitted to a kitchen sink in a space where a cook top or conventional range is not provided and to wet bars.
2. A lavatory in a toilet room or bathing facility for a single occupant accessed only through a private office and not for common use or public use shall not be required to provide knee and toe clearance complying with 306.
3. In residential dwelling units, cabinetry shall be permitted under lavatories and kitchen sinks provided that all of the following conditions are met:
(a) the cabinetry can be removed without removal or replacement of the fixture;
(b) the finish floor extends under the cabinetry; and
(c) the walls behind and surrounding the cabinetry are finished.
4. A knee clearance of 24 inches (610 mm) minimum above the finish floor or ground shall be permitted at lavatories and sinks used primarily by children 6 through 12 years where the rim or counter surface is 31 inches (785 mm) maximum above the finish floor or ground.
5. A parallel approach complying with 305 shall be permitted to lavatories and sinks used primarily by children 5 years and younger.
6. The dip of the overflow shall not be considered in determining knee and toe clearances.
7. No more than one bowl of a multi-bowl sink shall be required to provide knee and toe clearance complying with 306.
114
At lavatories and sinks, the dip of the ________ shall not be considered in determining knee and toe clearances.
OVERFLOW
606.2 Lavatories and Sinks, Clear Floor Space - A clear floor space complying with 305, positioned for a forward approach, and knee and toe clearance complying with 306 shall be provided.
EXCEPTIONS:
1. A parallel approach complying with 305 shall be permitted to a kitchen sink in a space where a cook top or conventional range is not provided and to wet bars.
2. A lavatory in a toilet room or bathing facility for a single occupant accessed only through a private office and not for common use or public use shall not be required to provide knee and toe clearance complying with 306.
3. In residential dwelling units, cabinetry shall be permitted under lavatories and kitchen sinks provided that all of the following conditions are met:
(a) the cabinetry can be removed without removal or replacement of the fixture;
(b) the finish floor extends under the cabinetry; and
(c) the walls behind and surrounding the cabinetry are finished.
4. A knee clearance of 24 inches (610 mm) minimum above the finish floor or ground shall be permitted at lavatories and sinks used primarily by children 6 through 12 years where the rim or counter surface is 31 inches (785 mm) maximum above the finish floor or ground.
5. A parallel approach complying with 305 shall be permitted to lavatories and sinks used primarily by children 5 years and younger.
6. The dip of the overflow shall not be considered in determining knee and toe clearances.
7. No more than one bowl of a multi-bowl sink shall be required to provide knee and toe clearance complying with 306.
115
At multi-bowl lavatory and sink installation, no more than ____ bowl shall be required to provide knee and toe clearance complying with 306.
ONE
606.2 Lavatories and Sinks, Clear Floor Space - A clear floor space complying with 305, positioned for a forward approach, and knee and toe clearance complying with 306 shall be provided.
EXCEPTIONS:
1. A parallel approach complying with 305 shall be permitted to a kitchen sink in a space where a cook top or conventional range is not provided and to wet bars.
2. A lavatory in a toilet room or bathing facility for a single occupant accessed only through a private office and not for common use or public use shall not be required to provide knee and toe clearance complying with 306.
3. In residential dwelling units, cabinetry shall be permitted under lavatories and kitchen sinks provided that all of the following conditions are met:
(a) the cabinetry can be removed without removal or replacement of the fixture;
(b) the finish floor extends under the cabinetry; and
(c) the walls behind and surrounding the cabinetry are finished.
4. A knee clearance of 24 inches (610 mm) minimum above the finish floor or ground shall be permitted at lavatories and sinks used primarily by children 6 through 12 years where the rim or counter surface is 31 inches (785 mm) maximum above the finish floor or ground.
5. A parallel approach complying with 305 shall be permitted to lavatories and sinks used primarily by children 5 years and younger.
6. The dip of the overflow shall not be considered in determining knee and toe clearances.
7. No more than one bowl of a multi-bowl sink shall be required to provide knee and toe clearance complying with 306.
116
Lavatories and sinks shall be installed with the front of the higher of the ___ or _______ surface ____ inches maximum above the finish floor or ground.
RIM; COUNTER ; 34 INCHES MAXIMUM
606.3 Lavatories and Sinks, Height - Lavatories and sinks shall be installed with the front of the higher of the rim or counter surface 34 inches (865 mm) maximum above the finish floor or ground.
117
A lavatory in a toilet or bathing facility for a single occupant accessed only through a private office and not for ______ use or ______ use shall not be required to comply with 606.3.
COMMON; PUBLIC
606.3 Lavatories and Sinks, Height - Lavatories and sinks shall be installed with the front of the higher of the rim or counter surface 34 inches (865 mm) maximum above the finish floor or ground.
EXCEPTIONS:
1. A lavatory in a toilet or bathing facility for a single occupant accessed only through a private office and not for common use or public use shall not be required to comply with 606.3.
2. In residential dwelling unit kitchens, sinks that are adjustable to variable heights, 29 inches (735 mm) minimum and 36 inches (915 mm) maximum, shall be permitted where rough-in plumbing permits connections of supply and drain pipes for sinks mounted at the height of 29 inches (735 mm).
118
In residential dwelling unit kitchens, sinks that are adjustable to variable heights, ____ inches minimum and ____ inches maximum, shall be permitted where rough-in plumbing permits connections of supply and drain pipes for sinks mounted at the height of ____ inches.
29 INCHES MINIMUM; 36 INCHES MAXIMUM; 29 INCHES
606.3 Lavatories and Sinks, Height - Lavatories and sinks shall be installed with the front of the higher of the rim or counter surface 34 inches (865 mm) maximum above the finish floor or ground.
EXCEPTIONS:
1. A lavatory in a toilet or bathing facility for a single occupant accessed only through a private office and not for common use or public use shall not be required to comply with 606.3.
2. In residential dwelling unit kitchens, sinks that are adjustable to variable heights, 29 inches (735 mm) minimum and 36 inches (915 mm) maximum, shall be permitted where rough-in plumbing permits connections of supply and drain pipes for sinks mounted at the height of 29 inches (735 mm).
119
Controls for faucets shall not require _____ ________, ________, or ________ __ ___ _____.
TIGHT GRASPING; PINCHING; TWISTING OF THE WRIST
606.4 Lavatories and Sinks, Faucets - Controls for faucets shall comply with 309. Hand-operated metering faucets shall remain open for 10 seconds minimum.
120
Lavatory and sink hand-operated metering faucets shall remain open for ____ seconds minimum.
10 SECONDS MINIMUM
606.4 Lavatories and Sinks, Faucets - Controls for faucets shall comply with 309. Hand-operated metering faucets shall remain open for 10 seconds minimum.
121
Water supply and drain pipes under lavatories and sinks shall be _________ or otherwise configured to protect against _______.
INSULATED; CONTACT
606.5 Lavatories and Sinks, Exposed Pipes and Surfaces - Water supply and drain pipes under lavatories and sinks shall be insulated or otherwise configured to protect against contact. There shall be no sharp or abrasive surfaces under lavatories and sinks.
122
There shall be no _____ or ________ surfaces under lavatories and sinks.
SHARP; ABRASIVE
606.5 Lavatories and Sinks, Exposed Pipes and Surfaces - Water supply and drain pipes under lavatories and sinks shall be insulated or otherwise configured to protect against contact. There shall be no sharp or abrasive surfaces under lavatories and sinks.
123
Clearance in front of bathtubs shall extend the length of the bathtub and shall be ____ inches wide minimum.
30 INCHES MINIMUM
607.2 Bathtubs, Clearance - Clearance in front of bathtubs shall extend the length of the bathtub and shall be 30 inches (760 mm) wide minimum. A lavatory complying with 606 shall be permitted at the control end of the clearance. Where a permanent seat is provided at the head end of the bathtub, the clearance shall extend 12 inches (305 mm) minimum beyond the wall at the head end of the bathtub.
124
A lavatory complying with 606 shall be permitted at the _______ end of the clearance.
CONTROL
607.2 Bathtubs, Clearance - Clearance in front of bathtubs shall extend the length of the bathtub and shall be 30 inches (760 mm) wide minimum. A lavatory complying with 606 shall be permitted at the control end of the clearance. Where a permanent seat is provided at the head end of the bathtub, the clearance shall extend 12 inches (305 mm) minimum beyond the wall at the head end of the bathtub.
125
Where a _________ seat is provided at the head end of the bathtub, the clearance shall extend ____ inches minimum beyond the wall at the head end of the bathtub.
PERMANENT; 12 INCHES MINIMUM
607.2 Bathtubs, Clearance - Clearance in front of bathtubs shall extend the length of the bathtub and shall be 30 inches (760 mm) wide minimum. A lavatory complying with 606 shall be permitted at the control end of the clearance. Where a permanent seat is provided at the head end of the bathtub, the clearance shall extend 12 inches (305 mm) minimum beyond the wall at the head end of the bathtub.
126
A _________ seat at the head end of the bathtub or a _________ in-tub seat shall be provided
PERMANENT; REMOVABLE
607.3 Bathtubs, Seat - A permanent seat at the head end of the bathtub or a removable in-tub seat shall be provided. Seats shall comply with 610.
127
Grab bars shall not be required to be installed in a bathtub located in a bathing facility for a single occupant accessed only through a private office and not for common use or public use provided that _____________ has been installed in walls and located so as to permit the ____________ of grab bars complying with 607.4.
REINFORCEMENT; INSTALLATION
607.4 Bathtubs, Grab Bars - Grab bars for bathtubs shall comply with 609 and shall be provided in accordance with 607.4.1 or 607.4.2.
EXCEPTIONS:
1. Grab bars shall not be required to be installed in a bathtub located in a bathing facility for a single occupant accessed only through a private office and not for common use or public use provided that reinforcement has been installed in walls and located so as to permit the installation of grab bars complying with 607.4.
2. In residential dwelling units, grab bars shall not be required to be installed in bathtubs located in bathing facilities provided that reinforcement has been installed in walls and located so as to permit the installation of grab bars complying with 607.4.
128
In residential dwelling units, grab bars shall not be required to be installed in bathtubs located in bathing facilities provided that _____________ has been installed in walls and located so as to permit the ____________ of grab bars complying with 607.4.
REINFORCEMENT; INSTALLATION
607.4 Bathtubs, Grab Bars - Grab bars for bathtubs shall comply with 609 and shall be provided in accordance with 607.4.1 or 607.4.2.
EXCEPTIONS:
1. Grab bars shall not be required to be installed in a bathtub located in a bathing facility for a single occupant accessed only through a private office and not for common use or public use provided that reinforcement has been installed in walls and located so as to permit the installation of grab bars complying with 607.4.
2. In residential dwelling units, grab bars shall not be required to be installed in bathtubs located in bathing facilities provided that reinforcement has been installed in walls and located so as to permit the installation of grab bars complying with 607.4.
129
T / F - Grab bars shall be provided at bathtubs with permanent seats.
TRUE
607.4.1 Bathtubs, Bathtubs With Permanent Seats - For bathtubs with permanent seats, grab bars shall be provided in accordance with 607.4.1.
130
At bathtubs with permanent seats, ___ grab bars shall be installed on the back wall, one located in accordance with 609.4 and the other located ____ inches minimum and ____ inches maximum above the rim of the bathtub.
TWO; 8 INCHES MINIMUM; 10 INCHES MAXIMUM
607.4.1.1 Bathtubs With Permanent Seats, Back Wall - Two grab bars shall be installed on the back wall, one located in accordance with 609.4 and the other located 8 inches (205 mm) minimum and 10 inches (255 mm) maximum above the rim of the bathtub. Each grab bar shall be installed 15 inches (380 mm) maximum from the head end wall and 12 inches (305 mm) maximum from the control end wall.
131
Each grab bar at bathtubs with a permanent seat shall be installed ____ inches maximum from the head end wall and ____ inches maximum from the control end wall.
15 INCHES MAXIMUM; 12 INCHES MAXIMUM
607.4.1.1 Bathtubs With Permanent Seats, Back Wall - Two grab bars shall be installed on the back wall, one located in accordance with 609.4 and the other located 8 inches (205 mm) minimum and 10 inches (255 mm) maximum above the rim of the bathtub. Each grab bar shall be installed 15 inches (380 mm) maximum from the head end wall and 12 inches (305 mm) maximum from the control end wall.
132
At bathtubs with permanent seats, a grab bar ____ inches long minimum shall be installed on the _______ end wall at the _____ ____ of the bathtub.
24 INCHES LONG MINIMUM; CONTROL; FRONT EDGE
607.4.1.2 Bathtubs With Permanent Seats, Control End Wall - A grab bar 24 inches (610 mm) long minimum shall be installed on the control end wall at the front edge of the bathtub.
133
At bathtubs without a permanent seat, ____ grab bars shall be installed on the back wall, one located in accordance with 609.4 and other located ____ inches minimum and ____ inches maximum above the rim of the bathtub.
TWO; 8 INCHES MINIMUM; 10 INCHES MAXIMUM
607.4.2.1 Bathtubs Without Permanent Seats, Back Wall - Two grab bars shall be installed on the back wall, one located in accordance with 609.4 and other located 8 inches (205 mm) minimum and 10 inches (255 mm) maximum above the rim of the bathtub. Each grab bar shall be 24 inches (610 mm) long minimum and shall be installed 24 inches (610 mm) maximum from the head end wall and 12 inches (305 mm) maximum from the control end wall.
134
At bathtubs without a permanent seat, each grab bar shall be ____ inches long minimum and shall be installed ____ inches maximum from the head end wall and ____ inches maximum from the control end wall.
24 INCHESMINIMUM; 24 INCHES MAXIMUM; 12 INCHES MAXIMUM
607.4.2.1 Bathtubs Without Permanent Seats, Back Wall - Two grab bars shall be installed on the back wall, one located in accordance with 609.4 and other located 8 inches (205 mm) minimum and 10 inches (255 mm) maximum above the rim of the bathtub. Each grab bar shall be 24 inches (610 mm) long minimum and shall be installed 24 inches (610 mm) maximum from the head end wall and 12 inches (305 mm) maximum from the control end wall.
135
At bathtubs without permanent seats, a grab bar ____ inches long minimum shall be installed on the _______ end wall at the _____ ____ of the bathtub.
24 INCHES LONG MINIMUM; CONTROL; FRONT EDGE
607.4.2.2 Bathtubs Without Permanent Seats, Control End Wall - A grab bar 24 inches (610 mm) long minimum shall be installed on the control end wall at the front edge of the bathtub.
136
A grab bar ____ inches long minimum shall be installed on the ____ end wall at the _____ edge of the bathtub.
12 INCHES LONG MINIMUM; HEAD; FRONT
607.4.2.3 Bathtubs Without Permanent Seats, Head End Wall - A grab bar 12 inches (305 mm) long minimum shall be installed on the head end wall at the front edge of the bathtub.
137
At bathtubs without a permanent seat, controls, other than _____ ________, shall be located on an end wall.
DRAIN STOPPERS
607.5 Bathtubs Without Permanent Seats, Controls - Controls, other than drain stoppers, shall be located on an end wall. Controls shall be between the bathtub rim and grab bar, and between the open side of the bathtub and the centerline of the width of the bathtub. Controls shall comply with 309.4.
138
At bathtubs without a permanent seat, controls shall be between the bathtub ___ and ____ ___, and between the ____ side of the bathtub and the centerline of the _____ of the bathtub.
RIM; GRAB BAR; OPEN; WIDTH
607.5 Bathtubs Without Permanent Seats, Controls - Controls, other than drain stoppers, shall be located on an end wall. Controls shall be between the bathtub rim and grab bar, and between the open side of the bathtub and the centerline of the width of the bathtub. Controls shall comply with 309.4.
139
At bathtubs without a permanent seat, controls shall not require _____ ________, ________, or ________ __ ___ _____.
TIGHT GRASPING, PINCHING, TWISTING OF THE WRIST
607.5 Bathtubs Without Permanent Seats, Controls - Controls, other than drain stoppers, shall be located on an end wall. Controls shall be between the bathtub rim and grab bar, and between the open side of the bathtub and the centerline of the width of the bathtub. Controls shall comply with 309.4.
140
At bathtubs without a permanent seat, a shower spray unit with a hose ____ inches long minimum that can be used both as a fixed-position shower head and as a hand-held shower shall be provided.
59 INCHES MINIMUM
607.6 Bathtubs Without Permanent Seats, Shower Spray Unit and Water - A shower spray unit with a hose 59 inches (1500 mm) long minimum that can be used both as a fixed-position shower head and as a hand-held shower shall be provided. The shower spray unit shall have an on/off control with a non-positive shut-off. If an adjustable-height shower head on a vertical bar is used, the bar shall be installed so as not to obstruct the use of grab bars. Bathtub shower spray units shall deliver water that is 120 F (49 C) maximum.
141
At bathtubs without a permanent seat, the shower spray unit shall have an ______ control with a non-positive ________.
ON/OFF; SHUT-OFF
607.6 Bathtubs Without Permanent Seats, Shower Spray Unit and Water - A shower spray unit with a hose 59 inches (1500 mm) long minimum that can be used both as a fixed-position shower head and as a hand-held shower shall be provided. The shower spray unit shall have an on/off control with a non-positive shut-off. If an adjustable-height shower head on a vertical bar is used, the bar shall be installed so as not to obstruct the use of grab bars. Bathtub shower spray units shall deliver water that is 120 F (49 C) maximum.
142
If an adjustable-height shower head on a vertical bar is used at bathtubs without a permanent seat, the bar shall be installed so as not to ________ the use of grab bars.
OBSTRUCT
607.6 Bathtubs Without Permanent Seats, Shower Spray Unit and Water - A shower spray unit with a hose 59 inches (1500 mm) long minimum that can be used both as a fixed-position shower head and as a hand-held shower shall be provided. The shower spray unit shall have an on/off control with a non-positive shut-off. If an adjustable-height shower head on a vertical bar is used, the bar shall be installed so as not to obstruct the use of grab bars. Bathtub shower spray units shall deliver water that is 120 F (49 C) maximum.
143
At bathtubs without a permanent seat, bathtub shower spray units shall deliver water that is ____ F maximum.
120 F MAXIMUM
607.6 Bathtubs Without Permanent Seats, Shower Spray Unit and Water - A shower spray unit with a hose 59 inches (1500 mm) long minimum that can be used both as a fixed-position shower head and as a hand-held shower shall be provided. The shower spray unit shall have an on/off control with a non-positive shut-off. If an adjustable-height shower head on a vertical bar is used, the bar shall be installed so as not to obstruct the use of grab bars. Bathtub shower spray units shall deliver water that is 120 F (49 C) maximum.
144
At bathtubs without a permanent seat, enclosures for bathtubs shall not obstruct ________, _______, ______ ___ _____ units or obstruct transfer from wheelchairs onto bathtub seats or into bathtubs.
CONTROLS; FAUCETS; SHOWER AND SPRAY
607.7 Bathtubs Without Permanent Seats, Bathtub Enclosures - Enclosures for bathtubs shall not obstruct controls, faucets, shower and spray units or obstruct transfer from wheelchairs onto bathtub seats or into bathtubs. Enclosures on bathtubs shall not have tracks installed on the rim of the open face of the bathtub.
145
At bathtubs without a permanent seat, enclosures on bathtubs shall not have ______ installed on the rim of the open face of the bathtub.
TRACKS
607.7 Bathtubs Without Permanent Seats, Bathtub Enclosures - Enclosures for bathtubs shall not obstruct controls, faucets, shower and spray units or obstruct transfer from wheelchairs onto bathtub seats or into bathtubs. Enclosures on bathtubs shall not have tracks installed on the rim of the open face of the bathtub.
146
Transfer type shower compartments shall be ____ inches by ____ inches clear inside dimensions measured at the center points of opposing sides and shall have a ____ inch wide minimum entry on the face of the shower compartment.
36 INCHES; 36 INCHES; 36 INCHES WIDE MINIMUM
608.2.1 Shower Compartments, Transfer Type Shower Compartments - Transfer type shower compartments shall be 36 inches (915 mm) by 36 inches (915 mm) clear inside dimensions measured at the center points of opposing sides and shall have a 36 inch (915 mm) wide minimum entry on the face of the shower compartment. Clearance of 36 inches (915 mm) wide minimum by 48 inches (1220 mm) long minimum measured from the control wall shall be provided.
147
Clearance of ____ inches wide minimum by ____ inches long minimum measured from the control wall shall be provided.
36 INCHES WIDE; 48 INCHES LONG
608.2.1 Shower Compartments, Transfer Type Shower Compartments - Transfer type shower compartments shall be 36 inches (915 mm) by 36 inches (915 mm) clear inside dimensions measured at the center points of opposing sides and shall have a 36 inch (915 mm) wide minimum entry on the face of the shower compartment. Clearance of 36 inches (915 mm) wide minimum by 48 inches (1220 mm) long minimum measured from the control wall shall be provided.
148
Standard roll-in type shower compartments shall be ____ inches wide minimum by ____ inches deep minimum clear inside dimensions measured at center points of opposing sides and shall have a ____ inches wide minimum entry on the face of the shower compartment.
30 INCHES WIDE; 60 INCHES DEEP; 60 INCHES WIDE
608.2.2 Shower Compartments, Standard Roll-In Type Shower Compartments - Standard roll-in type shower compartments shall be 30 inches (760 mm) wide minimum by 60 inches (1525 mm) deep minimum clear inside dimensions measured at center points of opposing sides and shall have a 60 inches (1525 mm) wide minimum entry on the face of the shower compartment.
149
At standard roll-in type showers, a ____ inch wide minimum by ____ inch long minimum clearance shall be provided adjacent to the open face of the shower compartment.
30 INCH WIDE; 60 INCH LONG
608.2.2.1 Standard Roll-In Type Shower Compartments, Clearance - A 30 inch (760 mm) wide minimum by 60 inch (1525 mm) long minimum clearance shall be provided adjacent to the open face of the shower compartment.
150
At standard roll-in type showers, a lavatory complying with 606 shall be permitted on one ____ inch wide minimum side of the clearance provided that it is not on the side of the clearance adjacent to the ________ or, where provided, not on the side of the clearance adjacent to the ______ ____.
30 INCH; CONTROLS; SHOWER SEAT
608.2.2.1 Standard Roll-In Type Shower Compartments, Clearance - A 30 inch (760 mm) wide minimum by 60 inch (1525 mm) long minimum clearance shall be provided adjacent to the open face of the shower compartment.
EXCEPTION: A lavatory complying with 606 shall be permitted on one 30 inch (760 mm) wide minimum side of the clearance provided that it is not on the side of the clearance adjacent to the controls or, where provided, not on the side of the clearance adjacent to the shower seat.
151
Alternate roll-in type shower compartments shall be ____ inches wide and ____ inches deep minimum clear inside dimensions measured at center points of opposing sides.
36 INCHES; 60 INCHES
608.2.3 Shower Compartments, Alternate Roll-In Type Shower Compartments - Alternate roll-in type shower compartments shall be 36 inches (915 mm) wide and 60 inches (1525 mm) deep minimum clear inside dimensions measured at center points of opposing sides. A 36 inch (915 mm) wide minimum entry shall be provided at one end of the long side of the compartment.
152
At alternate roll-in type showers, a ____ inch wide minimum entry shall be provided at one end of the long side of the compartment.
36 INCH
608.2.3 Shower Compartments, Alternate Roll-In Type Shower Compartments - Alternate roll-in type shower compartments shall be 36 inches (915 mm) wide and 60 inches (1525 mm) deep minimum clear inside dimensions measured at center points of opposing sides. A 36 inch (915 mm) wide minimum entry shall be provided at one end of the long side of the compartment.
153
Where multiple grab bars are used at shower compartments, required horizontal grab bars shall be installed at the same height above the finish floor.
608.3 Shower Compartments, Grab Bars - Grab bars shall comply with 609 and shall be provided in accordance with 608.3. Where multiple grab bars are used, required horizontal grab bars shall be installed at the same height above the finish floor.
154
Grab bars shall not be required to be installed in a shower located in a bathing facility for a ______ occupant accessed only through a _______ ______, and not for common use or public use provided that _____________ has been installed in walls and located so as to permit the installation of grab bars complying with 608.3.
SINGLE; PRIVATE OFFICE; REINFORCEMENT
608.3 Shower Compartments, Grab Bars - Grab bars shall comply with 609 and shall be provided in accordance with 608.3. Where multiple grab bars are used, required horizontal grab bars shall be installed at the same height above the finish floor.
EXCEPTIONS:
1. Grab bars shall not be required to be installed in a shower located in a bathing facility for a single occupant accessed only through a private office, and not for common use or public use provided that reinforcement has been installed in walls and located so as to permit the installation of grab bars complying with 608.3.
2. In residential dwelling units, grab bars shall not be required to be installed in showers located in bathing facilities provided that reinforcement has been installed in walls and located so as to permit the installation of grab bars complying with 608.3.
155
In residential ________ units, grab bars shall not be required to be installed in showers located in bathing facilities provided that _____________ has been installed in walls and located so as to permit the installation of grab bars complying with 608.3.
DWELLING; REINFORCEMENT
608.3 Shower Compartments, Grab Bars - Grab bars shall comply with 609 and shall be provided in accordance with 608.3. Where multiple grab bars are used, required horizontal grab bars shall be installed at the same height above the finish floor.
EXCEPTIONS:
1. Grab bars shall not be required to be installed in a shower located in a bathing facility for a single occupant accessed only through a private office, and not for common use or public use provided that reinforcement has been installed in walls and located so as to permit the installation of grab bars complying with 608.3.
2. In residential dwelling units, grab bars shall not be required to be installed in showers located in bathing facilities provided that reinforcement has been installed in walls and located so as to permit the installation of grab bars complying with 608.3.
156
In transfer type shower compartments, grab bars shall be provided across the _______ ____ and ____ ____ to a point ____ inches from the control wall.
CONTROL WALL; BACK WALL; 18 INCHES
608.3.1 Grab Bars, Transfer Type Shower Compartments - In transfer type compartments, grab bars shall be provided across the control wall and back wall to a point 18 inches (455 mm) from the control wall.
157
Where a seat is provided in standard roll-in type shower compartments, grab bars shall be provided on the ____ wall and the side ____ ________ the seat.
BACK; SIDE; OPPOSITE
608.3.2 Grab Bars, Standard Roll-In Type Shower Compartments - Where a seat is provided in standard roll-in type shower compartments, grab bars shall be provided on the back wall and the side wall opposite the seat. Grab bars shall not be provided above the seat. Where a seat is not provided in standard roll-in type shower compartments, grab bars shall be provided on three walls. Grab bars shall be installed 6 inches (150 mm) maximum from adjacent walls.
158
At standard roll-in type showers, grab bars shall not be provided above the ____.
SEAT
608.3.2 Grab Bars, Standard Roll-In Type Shower Compartments - Where a seat is provided in standard roll-in type shower compartments, grab bars shall be provided on the back wall and the side wall opposite the seat. Grab bars shall not be provided above the seat. Where a seat is not provided in standard roll-in type shower compartments, grab bars shall be provided on three walls. Grab bars shall be installed 6 inches (150 mm) maximum from adjacent walls.
159
Where a seat is not provided in standard roll-in type shower compartments, grab bars shall be provided on _____ walls.
THREE
608.3.2 Grab Bars, Standard Roll-In Type Shower Compartments - Where a seat is provided in standard roll-in type shower compartments, grab bars shall be provided on the back wall and the side wall opposite the seat. Grab bars shall not be provided above the seat. Where a seat is not provided in standard roll-in type shower compartments, grab bars shall be provided on three walls. Grab bars shall be installed 6 inches (150 mm) maximum from adjacent walls.
160
Grab bars shall be installed ____ inches maximum from ________ walls.
6 INCHES; ADJACENT
608.3.2 Grab Bars, Standard Roll-In Type Shower Compartments - Where a seat is provided in standard roll-in type shower compartments, grab bars shall be provided on the back wall and the side wall opposite the seat. Grab bars shall not be provided above the seat. Where a seat is not provided in standard roll-in type shower compartments, grab bars shall be provided on three walls. Grab bars shall be installed 6 inches (150 mm) maximum from adjacent walls.
161
In alternate roll-in type shower compartments, grab bars shall be provided on the ____ wall and the ____ wall ________ from the compartment entry.
BACK; SIDE; FARTHEST
608.3.3 Grab Bars, Alternate Roll-In Type Shower Compartments - In alternate roll-in type shower compartments, grab bars shall be provided on the back wall and the side wall farthest from the compartment entry. Grab bars shall not be provided above the seat. Grab bars shall be installed 6 inches (150 mm) maximum from adjacent walls.
162
In alternate roll-in type shower compartments, grab bars shall not be provided above the ____.
SEAT
608.3.3 Grab Bars, Alternate Roll-In Type Shower Compartments - In alternate roll-in type shower compartments, grab bars shall be provided on the back wall and the side wall farthest from the compartment entry. Grab bars shall not be provided above the seat. Grab bars shall be installed 6 inches (150 mm) maximum from adjacent walls.
163
In alternate roll-in type shower compartments, grab bars shall be installed ____ inches maximum from _______ walls.
6 INCHES; ADJACENT
608.3.3 Grab Bars, Alternate Roll-In Type Shower Compartments - In alternate roll-in type shower compartments, grab bars shall be provided on the back wall and the side wall farthest from the compartment entry. Grab bars shall not be provided above the seat. Grab bars shall be installed 6 inches (150 mm) maximum from adjacent walls.
164
In shower compartments, a _______ or __-_______ seat shall be provided in ________ type shower compartments.
FOLDING; NON-FOLDING; TRANSFER
608.4 Shower Compartments, Seats - A folding or non-folding seat shall be provided in transfer type shower compartments. A folding seat shall be provided in roll-in type showers required in transient lodging guest rooms with mobility features complying with 806.2. Seats shall comply with 610.
165
A _______ ____ shall be provided in _______ type showers required in transient lodging guest rooms with mobility features complying with 806.2.
FOLDING SEAT; ROLL-IN
608.4 Shower Compartments, Seats - A folding or non-folding seat shall be provided in transfer type shower compartments. A folding seat shall be provided in roll-in type showers required in transient lodging guest rooms with mobility features complying with 806.2. Seats shall comply with 610.
166
_______ _____ provided in roll-in type showers required in transient lodging guest rooms with mobility features, shall comply with ___ - _____.
FOLDING SEATS; 610 - SEATS
608.4 Shower Compartments, Seats - A folding or non-folding seat shall be provided in transfer type shower compartments. A folding seat shall be provided in roll-in type showers required in transient lodging guest rooms with mobility features complying with 806.2. Seats shall comply with 610.
167
In residential dwelling units, seats shall not be required in ________ type shower compartments provided that _____________ has been installed in walls so as to permit the ____________ of seats complying with 608.4.
TRANSFER; REINFORCEMENT; INSTALLATION
608.4 Shower Compartments, Seats - A folding or non-folding seat shall be provided in transfer type shower compartments. A folding seat shall be provided in roll-in type showers required in transient lodging guest rooms with mobility features complying with 806.2. Seats shall comply with 610.
EXCEPTION: In residential dwelling units, seats shall not be required in transfer type shower compartments provided that reinforcement has been installed in walls so as to permit the installation of seats complying with 608.4.
168
In transfer type shower compartments, the controls, faucets, and shower spray unit shall be installed on the side wall opposite the seat ____ inches minimum and ____ inches maximum above the shower floor and shall be located on the control wall ____ inches maximum from the __________ of the seat toward the shower opening.
38 INCHES; 48 INCHES; 15 INCHES; CENTERLINE
608.5.1 Controls, Transfer Type Shower Compartments - In transfer type shower compartments, the controls, faucets, and shower spray unit shall be installed on the side wall opposite the seat 38 inches (965 mm) minimum and 48 inches (1220 mm) maximum above the shower floor and shall be located on the control wall 15 inches (380 mm) maximum from the centerline of the seat toward the shower opening.
169
In standard roll-in type shower compartments, the controls, faucets, and shower spray unit shall be located above the grab bar, but no higher than 48 inches (1220 mm) above the shower floor.
608.5.2 Controls, Standard Roll-In Type Shower Compartments - In standard roll-in type shower compartments, the controls, faucets, and shower spray unit shall be located above the grab bar, but no higher than 48 inches (1220 mm) above the shower floor. Where a seat is provided, the controls, faucets, and shower spray unit shall be installed on the back wall adjacent to the seat wall and shall be located 27 inches (685 mm) maximum from the seat wall.
170
Where a seat is provided in standard roll-in type shower compartments, the ________, _______, and ______ _____ ____ shall be installed on the back wall adjacent to the seat wall and shall be located ____ inches maximum from the seat wall.
CONTROLS; FAUCETS; SHOWER SPRAY UNIT; 27 INCHES
608.5.2 Controls, Standard Roll-In Type Shower Compartments - In standard roll-in type shower compartments, the controls, faucets, and shower spray unit shall be located above the grab bar, but no higher than 48 inches (1220 mm) above the shower floor. Where a seat is provided, the controls, faucets, and shower spray unit shall be installed on the back wall adjacent to the seat wall and shall be located 27 inches (685 mm) maximum from the seat wall.
171
In alternate roll-in type shower compartments, the ________, _______, and ______ _____ ____ shall be located above the grab bar, but no higher than ____ inches above the shower floor.
CONTROLS; FAUCETS; SHOWER SPRAY UNIT; 48 INCHES
608.5.3 Controls, Alternate Roll-In Type Shower Compartments - In alternate roll-in type shower compartments, the controls, faucets, and shower spray unit shall be located above the grab bar, but no higher than 48 inches (1220 mm) above the shower floor. Where a seat is provided, the controls, faucets, and shower spray unit shall be located on the side wall adjacent to the seat 27 inches (685 mm) maximum from the side wall behind the seat or shall be located on the back wall opposite the seat 15 inches (380 mm) maximum, left or right, of the centerline of the seat. Where a seat is not provided, the controls, faucets, and shower spray unit shall be installed on the side wall farthest from the compartment entry.
172
In alternate roll-in type shower compartments, where a seat is ________, the controls, faucets, and shower spray unit shall be located on the side wall adjacent to the seat ____ inches maximum from the side wall behind the seat or shall be located on the back wall opposite the seat ____ inches maximum, left or right, of the centerline of the seat.
PROVIDED; 27 INCHES; 15 INCHES
608.5.3 Controls, Alternate Roll-In Type Shower Compartments - In alternate roll-in type shower compartments, the controls, faucets, and shower spray unit shall be located above the grab bar, but no higher than 48 inches (1220 mm) above the shower floor. Where a seat is provided, the controls, faucets, and shower spray unit shall be located on the side wall adjacent to the seat 27 inches (685 mm) maximum from the side wall behind the seat or shall be located on the back wall opposite the seat 15 inches (380 mm) maximum, left or right, of the centerline of the seat. Where a seat is not provided, the controls, faucets, and shower spray unit shall be installed on the side wall farthest from the compartment entry.
173
In alternate roll-in type shower compartments, where a seat is ____________, the controls, faucets, and shower spray unit shall be installed on the side wall ________ from the compartment entry.
NOT PROVIDED; FARTHEST
608.5.3 Controls, Alternate Roll-In Type Shower Compartments - In alternate roll-in type shower compartments, the controls, faucets, and shower spray unit shall be located above the grab bar, but no higher than 48 inches (1220 mm) above the shower floor. Where a seat is provided, the controls, faucets, and shower spray unit shall be located on the side wall adjacent to the seat 27 inches (685 mm) maximum from the side wall behind the seat or shall be located on the back wall opposite the seat 15 inches (380 mm) maximum, left or right, of the centerline of the seat. Where a seat is not provided, the controls, faucets, and shower spray unit shall be installed on the side wall farthest from the compartment entry.
174
In shower compartments, a shower spray unit with a hose ____ inches long minimum that can be used both as a _____-________ shower head and as a ____-____ shower shall be provided.
59 INCHES; FIXED-POSITION; HAND-HELD
608.6 Shower Compartments, Shower Spray Unit and Water - A shower spray unit with a hose 59 inches (1500 mm) long minimum that can be used both as a fixed-position shower head and as a hand-held shower shall be provided. The shower spray unit shall have an on/off control with a non-positive shut-off. If an adjustable-height shower head on a vertical bar is used, the bar shall be installed so as not to obstruct the use of grab bars. Shower spray units shall deliver water that is 120 F (49 C) maximum.
175
In shower compartments, the shower spray unit shall have an ______ control with a non-positive ____-___.
ON/OFF; SHUT-OFF
608.6 Shower Compartments, Shower Spray Unit and Water - A shower spray unit with a hose 59 inches (1500 mm) long minimum that can be used both as a fixed-position shower head and as a hand-held shower shall be provided. The shower spray unit shall have an on/off control with a non-positive shut-off. If an adjustable-height shower head on a vertical bar is used, the bar shall be installed so as not to obstruct the use of grab bars. Shower spray units shall deliver water that is 120 F (49 C) maximum.
176
If an adjustable-height shower head on a vertical bar is used in shower compartments, the bar shall be installed so as not to ________ the use of grab bars.
OBSTRUCT
608.6 Shower Compartments, Shower Spray Unit and Water - A shower spray unit with a hose 59 inches (1500 mm) long minimum that can be used both as a fixed-position shower head and as a hand-held shower shall be provided. The shower spray unit shall have an on/off control with a non-positive shut-off. If an adjustable-height shower head on a vertical bar is used, the bar shall be installed so as not to obstruct the use of grab bars. Shower spray units shall deliver water that is 120 F (49 C) maximum.
177
In shower compartments, shower spray units shall deliver water that is ___ F maximum.
120 F
608.6 Shower Compartments, Shower Spray Unit and Water - A shower spray unit with a hose 59 inches (1500 mm) long minimum that can be used both as a fixed-position shower head and as a hand-held shower shall be provided. The shower spray unit shall have an on/off control with a non-positive shut-off. If an adjustable-height shower head on a vertical bar is used, the bar shall be installed so as not to obstruct the use of grab bars. Shower spray units shall deliver water that is 120 F (49 C) maximum.
178
In shower compartments, a fixed shower head located at ____ inches maximum above the shower finish floor shall be permitted instead of a hand-held spray unit in facilities that are not _______ ____ facilities, ____-____ ____ facilities, _________ _______ _____ rooms, or _________ ________ units.
48 INCHES; MEDICAL CARE; LONG-TERM CARE; TRANSIENT LODGING GUEST; RESIDENTIAL DWELLING
608.6 Shower Compartments, Shower Spray Unit and Water - A shower spray unit with a hose 59 inches (1500 mm) long minimum that can be used both as a fixed-position shower head and as a hand-held shower shall be provided. The shower spray unit shall have an on/off control with a non-positive shut-off. If an adjustable-height shower head on a vertical bar is used, the bar shall be installed so as not to obstruct the use of grab bars. Shower spray units shall deliver water that is 120 F (49 C) maximum.
EXCEPTION: A fixed shower head located at 48 inches (1220 mm) maximum above the shower finish floor shall be permitted instead of a hand-held spray unit in facilities that are not medical care facilities, long-term care facilities, transient lodging guest rooms, or residential dwelling units.
179
Thresholds in roll-in type shower compartments shall be ____ inch high maximum in accordance with 303.
1/2 INCH
608.7 Shower Compartments, Thresholds - Thresholds in roll-in type shower compartments shall be 1/2 inch (13 mm) high maximum in accordance with 303. In transfer type shower compartments, thresholds 1/2 inch (13 mm) high maximum shall be beveled, rounded, or vertical.
180
In transfer type shower compartments, thresholds ____ inch high maximum shall be _______, _______, or ________.
1/2 INCH; BEVELED; ROUNDED; VERTICAL
608.7 Shower Compartments, Thresholds - Thresholds in roll-in type shower compartments shall be 1/2 inch (13 mm) high maximum in accordance with 303. In transfer type shower compartments, thresholds 1/2 inch (13 mm) high maximum shall be beveled, rounded, or vertical.
181
A threshold ____ inches high maximum shall be permitted in transfer type shower compartments in existing facilities where provision of a ____ inch high threshold would disturb the __________ _____________ of the floor slab.
2 INCHES; 1/2 INCH; STRUCTURAL REINFORCEMENT
608.7 Shower Compartments, Thresholds - Thresholds in roll-in type shower compartments shall be 1/2 inch (13 mm) high maximum in accordance with 303. In transfer type shower compartments, thresholds 1/2 inch (13 mm) high maximum shall be beveled, rounded, or vertical.
EXCEPTION: A threshold 2 inches (51 mm) high maximum shall be permitted in transfer type shower compartments in existing facilities where provision of a 1/2 inch (13 mm) high threshold would disturb the structural reinforcement of the floor slab.
182
Enclosures for shower compartments shall not obstruct ________, _______, and ______ _____ _____ or ________ transfer from wheelchairs onto shower seats.
CONTROLS; FAUCETS; SHOWER SPRAY UNITS; OBSTRUCT
608.8 Shower Compartments, Shower Enclosures - Enclosures for shower compartments shall not obstruct controls, faucets, and shower spray units or obstruct transfer from wheelchairs onto shower seats.
183
Grab bars with circular cross sections shall have an outside diameter of _____ inches minimum and ____ inches maximum.
1 1/4 INCHES MINIMUM; 2 INCHES MAXIMUM
609.2.1 Grab Bars, Circular Cross Section - Grab bars with circular cross sections shall have an outside diameter of 1 1/4 inches (32 mm) minimum and 2 inches (51 mm) maximum.
184
Grab bars with non-circular cross sections shall have a cross-section dimension of ____ inches maximum and a perimeter dimension of ____ inches minimum and ____ inches maximum.
2 INCHES MAXIMUM; 4 INCHES MINIMUM; 4.8 INCHES MAXIMUM
609.2.2 Grab Bars, Non-Circular Cross Section - Grab bars with non-circular cross sections shall have a cross-section dimension of 2 inches (51 mm) maximum and a perimeter dimension of 4 inches (100 mm) minimum and 4.8 inches (120 mm) maximum.
185
The space between the wall and the grab bar shall be ____ inches.
1 1/2 INCHES
609.3 Grab Bars, Spacing - The space between the wall and the grab bar shall be 1 1/2 inches (38 mm). The space between the grab bar and projecting objects below and at the ends shall be 1 1/2 inches (38 mm) minimum. The space between the grab bar and projecting objects above shall be 12 inches (305 mm) minimum.
186
The space between the grab bar and projecting objects below and at the ends shall be ____ inches minimum.
1 1/2 INCHES MINIMUM
609.3 Grab Bars, Spacing - The space between the wall and the grab bar shall be 1 1/2 inches (38 mm). The space between the grab bar and projecting objects below and at the ends shall be 1 1/2 inches (38 mm) minimum. The space between the grab bar and projecting objects above shall be 12 inches (305 mm) minimum.
187
The space between the grab bar and projecting objects above shall be ____ inches minimum.
12 INCHES
609.3 Grab Bars, Spacing - The space between the wall and the grab bar shall be 1 1/2 inches (38 mm). The space between the grab bar and projecting objects below and at the ends shall be 1 1/2 inches (38 mm) minimum. The space between the grab bar and projecting objects above shall be 12 inches (305 mm) minimum.
188
The space between the grab bars and shower controls, shower fittings, and other grab bars above shall be permitted to be ____ inches minimum.
1 1/2 INCHES
609.3 Grab Bars, Spacing - The space between the wall and the grab bar shall be 1 1/2 inches (38 mm). The space between the grab bar and projecting objects below and at the ends shall be 1 1/2 inches (38 mm) minimum. The space between the grab bar and projecting objects above shall be 12 inches (305 mm) minimum.
EXCEPTION: The space between the grab bars and shower controls, shower fittings, and other grab bars above shall be permitted to be 1 1/2 inches (38 mm) minimum.
189
Grab bars shall be installed in a horizontal position, ____ inches minimum and ____ inches maximum above the finish floor measured to the top of the gripping surface.
33 INCHES MINIMUM; 36 INCHES MAXIMUM
609.4 Grab Bars, Position of Grab Bars - Grab bars shall be installed in a horizontal position, 33 inches (840 mm) minimum and 36 inches (915 mm) maximum above the finish floor measured to the top of the gripping surface, except that at water closets for children's use complying with 604.9, grab bars shall be installed in a horizontal position 18 inches (455 mm) minimum and 27 inches (685 mm) maximum above the finish floor measured to the top of the gripping surface. The height of the lower grab bar on the back wall of a bathtub shall comply with 607.4.1.1 or 607.4.2.1.
190
Grab bars at water closets for children's use complying with 604.9, shall be installed in a horizontal position ____ inches minimum and ____ inches maximum above the finish floor measured to the top of the gripping surface.
18 INCHES MINIMUM; 27 INCHES MAXIMUM
609.4 Grab Bars, Position of Grab Bars - Grab bars shall be installed in a horizontal position, 33 inches (840 mm) minimum and 36 inches (915 mm) maximum above the finish floor measured to the top of the gripping surface, except that at water closets for children's use complying with 604.9, grab bars shall be installed in a horizontal position 18 inches (455 mm) minimum and 27 inches (685 mm) maximum above the finish floor measured to the top of the gripping surface. The height of the lower grab bar on the back wall of a bathtub shall comply with 607.4.1.1 or 607.4.2.1.
191
The height of the lower grab bar on the back wall of a bathtub shall comply with _________ or _________.
607.4.1.1 OR 607.4.2.1
609.4 Grab Bars, Position of Grab Bars - Grab bars shall be installed in a horizontal position, 33 inches (840 mm) minimum and 36 inches (915 mm) maximum above the finish floor measured to the top of the gripping surface, except that at water closets for children's use complying with 604.9, grab bars shall be installed in a horizontal position 18 inches (455 mm) minimum and 27 inches (685 mm) maximum above the finish floor measured to the top of the gripping surface. The height of the lower grab bar on the back wall of a bathtub shall comply with 607.4.1.1 or 607.4.2.1.
192
Grab bars and any wall or other surfaces adjacent to grab bars shall be free of _____ or ________ elements and shall have _______ edges.
SHARP; ABRASIVE; ROUNDED
609.5 Grab Bars, Surface Hazards - Grab bars and any wall or other surfaces adjacent to grab bars shall be free of sharp or abrasive elements and shall have rounded edges.
193
T / F - Grab bars may rotate within their fittings.
FALSE
609.6 Grab Bars, Fittings - Grab bars shall not rotate within their fittings.
194
Grab bars shall be installed in any manner that provides a ________ surface at the specified locations and that does not ________ the required clear floor space.
GRIPPING; OBSTRUCT
609.7 Grab Bars, Installation - Grab bars shall be installed in any manner that provides a gripping surface at the specified locations and that does not obstruct the required clear floor space.
195
Grab bar allowable stresses shall not be exceeded for materials used when a ________ or __________ force of ____ pounds is applied at any point on the grab bar, fastener, mounting device, or supporting structure.
VERTICAL; HORIZONTAL; 250 POUNDS
609.8 Grab Bars, Structural Strength - Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the grab bar, fastener, mounting device, or supporting structure.
196
The top of bathtub seats shall be ____ inches minimum and ____ inches maximum above the bathroom finish floor.
17 INCHES MINIMUM; 19 INCHES MAXIMUM
610.2 Seats, Bathtub Seats - The top of bathtub seats shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum above the bathroom finish floor. The depth of a removable in-tub seat shall be 15 inches (380 mm) minimum and 16 inches (405 mm) maximum. The seat shall be capable of secure placement. Permanent seats at the head end of the bathtub shall be 15 inches (380 mm) deep minimum and shall extend from the back wall to or beyond the outer edge of the bathtub.
197
The depth of a removable in-tub seat shall be ____ inches minimum and ____ inches maximum.
15 INCHES MINIMUM; 16 INCHES MAXIMUM
610.2 Seats, Bathtub Seats - The top of bathtub seats shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum above the bathroom finish floor. The depth of a removable in-tub seat shall be 15 inches (380 mm) minimum and 16 inches (405 mm) maximum. The seat shall be capable of secure placement. Permanent seats at the head end of the bathtub shall be 15 inches (380 mm) deep minimum and shall extend from the back wall to or beyond the outer edge of the bathtub.
198
The bathtub seat shall be capable of secure placement. Permanent seats at the head end of the bathtub shall be ____ inches deep minimum and shall extend from the ____ ____ to or beyond the _____ ____ of the bathtub.
15 INCHES MINIMUM; BACK WALL; OUTER EDGE
610.2 Seats, Bathtub Seats - The top of bathtub seats shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum above the bathroom finish floor. The depth of a removable in-tub seat shall be 15 inches (380 mm) minimum and 16 inches (405 mm) maximum. The seat shall be capable of secure placement. Permanent seats at the head end of the bathtub shall be 15 inches (380 mm) deep minimum and shall extend from the back wall to or beyond the outer edge of the bathtub.
199
Where a seat is provided in a standard roll-in shower compartment, it shall be a _______ type, shall be installed on the ____ wall adjacent to the controls, and shall extend from the ____ wall to a point within ____ inches of the compartment entry.
FOLDING; SIDE; BACK; 3 INCHES
610.3 Seats, Shower Compartment Seats - Where a seat is provided in a standard roll-in shower compartment, it shall be a folding type, shall be installed on the side wall adjacent to the controls, and shall extend from the back wall to a point within 3 inches (75 mm) of the compartment entry. Where a seat is provided in an alternate roll-in type shower compartment, it shall be a folding type, shall be installed on the front wall opposite the back wall, and shall extend from the adjacent side wall to a point within 3 inches (75 mm) of the compartment entry. In transfer-type showers, the seat shall extend from the back wall to a point within 3 inches (75 mm) of the compartment entry. The top of the seat shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum above the bathroom finish floor. Seats shall comply with 610.3.1 or 610.3.2.
200
Where a seat is provided in an alternate roll-in type shower compartment, it shall be a _______ type, shall be installed on the _____ wall opposite the back wall, and shall extend from the adjacent ____ wall to a point within ____ inches of the compartment entry.
FOLDING; FRONT; SIDE; 3 INCHES
610.3 Seats, Shower Compartment Seats - Where a seat is provided in a standard roll-in shower compartment, it shall be a folding type, shall be installed on the side wall adjacent to the controls, and shall extend from the back wall to a point within 3 inches (75 mm) of the compartment entry. Where a seat is provided in an alternate roll-in type shower compartment, it shall be a folding type, shall be installed on the front wall opposite the back wall, and shall extend from the adjacent side wall to a point within 3 inches (75 mm) of the compartment entry. In transfer-type showers, the seat shall extend from the back wall to a point within 3 inches (75 mm) of the compartment entry. The top of the seat shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum above the bathroom finish floor. Seats shall comply with 610.3.1 or 610.3.2.
201
In transfer-type showers, the seat shall extend from the back wall to a point within ____ inches of the compartment _____.
3 INCHES; ENTRY
610.3 Seats, Shower Compartment Seats - Where a seat is provided in a standard roll-in shower compartment, it shall be a folding type, shall be installed on the side wall adjacent to the controls, and shall extend from the back wall to a point within 3 inches (75 mm) of the compartment entry. Where a seat is provided in an alternate roll-in type shower compartment, it shall be a folding type, shall be installed on the front wall opposite the back wall, and shall extend from the adjacent side wall to a point within 3 inches (75 mm) of the compartment entry. In transfer-type showers, the seat shall extend from the back wall to a point within 3 inches (75 mm) of the compartment entry. The top of the seat shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum above the bathroom finish floor. Seats shall comply with 610.3.1 or 610.3.2.
202
In transfer-type showers, the top of the seat shall be ____ inches minimum and ____ inches maximum above the bathroom finish floor.
17 INCHES MINIMUM; 19 INCHES MAXIMUM
610.3 Seats, Shower Compartment Seats - Where a seat is provided in a standard roll-in shower compartment, it shall be a folding type, shall be installed on the side wall adjacent to the controls, and shall extend from the back wall to a point within 3 inches (75 mm) of the compartment entry. Where a seat is provided in an alternate roll-in type shower compartment, it shall be a folding type, shall be installed on the front wall opposite the back wall, and shall extend from the adjacent side wall to a point within 3 inches (75 mm) of the compartment entry. In transfer-type showers, the seat shall extend from the back wall to a point within 3 inches (75 mm) of the compartment entry. The top of the seat shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum above the bathroom finish floor. Seats shall comply with 610.3.1 or 610.3.2.
203
Seats shall comply with _______ or _______.
610.3.1 OR 610.3.2
610.3 Seats, Shower Compartment Seats - Where a seat is provided in a standard roll-in shower compartment, it shall be a folding type, shall be installed on the side wall adjacent to the controls, and shall extend from the back wall to a point within 3 inches (75 mm) of the compartment entry. Where a seat is provided in an alternate roll-in type shower compartment, it shall be a folding type, shall be installed on the front wall opposite the back wall, and shall extend from the adjacent side wall to a point within 3 inches (75 mm) of the compartment entry. In transfer-type showers, the seat shall extend from the back wall to a point within 3 inches (75 mm) of the compartment entry. The top of the seat shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum above the bathroom finish floor. Seats shall comply with 610.3.1 or 610.3.2.
204
The rear edge of a rectangular seat shall be _____ inches maximum and the front edge ____ inches minimum and ____ inches maximum from the seat wall.
2 1/2 INCHES MAXIMUM; 15 INCHES MINIMUM; 16 INCHES MAXIMUM
610.3.1 Seats, Rectangular Seats - The rear edge of a rectangular seat shall be 2 1/2 inches (64 mm) maximum and the front edge 15 inches (380 mm) minimum and 16 inches (405 mm) maximum from the seat wall. The side edge of the seat shall be 1 1/2 inches (38 mm) maximum from the adjacent wall.
205
The side edge of a rectangular seat shall be _____ inches maximum from the adjacent wall.
1 1/2 INCHES MAXIMUM
610.3.1 Seats, Rectangular Seats - The rear edge of a rectangular seat shall be 2 1/2 inches (64 mm) maximum and the front edge 15 inches (380 mm) minimum and 16 inches (405 mm) maximum from the seat wall. The side edge of the seat shall be 1 1/2 inches (38 mm) maximum from the adjacent wall.
206
The rear edge of an L-shaped seat shall be _____ inches maximum and the front edge ____ inches minimum and ____ inches maximum from the seat wall.
2 1/2" INCHES MAXIMUM; 15 INCHES MINIMUM; 16 INCHES MAXIMUM
610.3.2 Seats, L-Shaped Seats - The rear edge of an L-shaped seat shall be 2 1/2 inches (64 mm) maximum and the front edge 15 inches (380 mm) minimum and 16 inches (405 mm) maximum from the seat wall. The rear edge of the "L" portion of the seat shall be 1 1/2 inches (38 mm) maximum from the wall and the front edge shall be 14 inches (355 mm) minimum and 15 inches (380 mm) maximum from the wall. The end of the "L" shall be 22 inches (560 mm) minimum and 23 inches maximum (585 mm) from the main seat wall.
207
The rear edge of the "L" portion of the seat shall be _____ inches maximum from the wall and the front edge shall be ____ inches minimum and ____ inches maximum from the wall.
1 1/2 INCHES MAXIMUM; 14 INCHES MINIMUM; 15 INCHES MAXIMUM
610.3.2 Seats, L-Shaped Seats - The rear edge of an L-shaped seat shall be 2 1/2 inches (64 mm) maximum and the front edge 15 inches (380 mm) minimum and 16 inches (405 mm) maximum from the seat wall. The rear edge of the "L" portion of the seat shall be 1 1/2 inches (38 mm) maximum from the wall and the front edge shall be 14 inches (355 mm) minimum and 15 inches (380 mm) maximum from the wall. The end of the "L" shall be 22 inches (560 mm) minimum and 23 inches maximum (585 mm) from the main seat wall.
208
The end of the "L" shall be ____ inches minimum and ____ inches maximum from the main seat wall.
22 INCHES MINIMUM; 23 INCHES MAXIMUM
610.3.2 Seats, L-Shaped Seats - The rear edge of an L-shaped seat shall be 2 1/2 inches (64 mm) maximum and the front edge 15 inches (380 mm) minimum and 16 inches (405 mm) maximum from the seat wall. The rear edge of the "L" portion of the seat shall be 1 1/2 inches (38 mm) maximum from the wall and the front edge shall be 14 inches (355 mm) minimum and 15 inches (380 mm) maximum from the wall. The end of the "L" shall be 22 inches (560 mm) minimum and 23 inches maximum (585 mm) from the main seat wall.
209
Allowable stresses shall not be exceeded for materials used when a ________ or __________ force of ____ pounds is applied at any point on the bench seat, fastener, mounting device, or supporting structure.
VERTICAL; HORIZONTAL; 250 POUNDS
610.4 Seats, Structural Strength - Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or supporting structure.
210
At washing machines and clothes dryers, a clear floor or ground space complying with 305 positioned for ________ approach shall be provided.
PARALLEL
611.2 Washing Machines and Clothes Dryers, Clear Floor Space - A clear floor or ground space complying with 305 positioned for parallel approach shall be provided. The clear floor or ground space shall be centered on the appliance.
211
At washing machines and clothes dryers, the clear floor or ground space shall be ________ on the appliance.
CENTERED
611.2 Washing Machines and Clothes Dryers, Clear Floor Space - A clear floor or ground space complying with 305 positioned for parallel approach shall be provided. The clear floor or ground space shall be centered on the appliance.
212
Washing machines and clothes dryers shall not require _____ ________, ________, or ________ __ ___ _____.
TIGHT GRASPING; PINCHING; TWISTING OF THE WRIST
611.3 Washing Machines and Clothes Dryers, Operable Parts - Operable parts, including doors, lint screens, and detergent and bleach compartments shall comply with 309.
213
Top loading machines shall have the door to the laundry compartment located ____ inches maximum above the finish floor.
36 INCHES MAXIMUM
611.4 Washing Machines and Clothes Dryers, Height - Top loading machines shall have the door to the laundry compartment located 36 inches (915 mm) maximum above the finish floor. Front loading machines shall have the bottom of the opening to the laundry compartment located 15 inches (380 mm) minimum and 36 inches (915 mm) maximum above the finish floor.
214
Front loading machines shall have the bottom of the opening to the laundry compartment located ____ inches minimum and ____ inches maximum above the finish floor.
15 INCHES MINIMUM; 36 INCHES MAXIMUM
611.4 Washing Machines and Clothes Dryers, Height - Top loading machines shall have the door to the laundry compartment located 36 inches (915 mm) maximum above the finish floor. Front loading machines shall have the bottom of the opening to the laundry compartment located 15 inches (380 mm) minimum and 36 inches (915 mm) maximum above the finish floor.
215
Where seating is provided in saunas and steam rooms, at least one _____ shall comply with 903.
BENCH
612.2 Saunas and Steam Rooms, Bench - Where seating is provided in saunas and steam rooms, at least one bench shall comply with 903. Doors shall not swing into the clear floor space required by 903.2.
216
At saunas and steam rooms doors _________ swing into the clear floor space required by 903.2.
SHALL NOT
612.2 Saunas and Steam Rooms, Bench - Where seating is provided in saunas and steam rooms, at least one bench shall comply with 903. Doors shall not swing into the clear floor space required by 903.2.
217
At saunas and steam rooms a ______ _________ _____ shall be permitted to obstruct the turning space required by 612.3 and the clear floor or ground space required by 903.2.
READILY REMOVABLE BENCH
612.2 Saunas and Steam Rooms, Bench - Where seating is provided in saunas and steam rooms, at least one bench shall comply with 903. Doors shall not swing into the clear floor space required by 903.2.
EXCEPTION: A readily removable bench shall be permitted to obstruct the turning space required by 612.3 and the clear floor or ground space required by 903.2.
218
A _______ _____ complying with ____ shall be provided within saunas and steam rooms.
TURNING SPACE; 304
612.3 Saunas and Steam Rooms, Turning Space - A turning space complying with 304 shall be provided within saunas and steam rooms.
