Chapter 6 Flashcards
Which of the following BEST describes why the liner should never be removed from a protective coat?
Select one:
a. It allows less restrictive movement during incident.
b. It traps insulating air close to the body.
c. It increases direct flame contact exposure.
d. It compromises the design and increases the likelihood of injuries.
d.It compromises the design and increases the likelihood of injuries.
Compartment doors may interfere with what type of SCBA mount?
Select one:
a. Unmounted
b. Rear external mount
c. Backup mount
d. Seat mount
c.Backup mount
When donning SCBA, all straps on the harness assembly and facepiece should be:
Select one:
a. fully extended.
b. adjusted per local SOPs.
c. adjusted individually.
d. partially extended.
b.adjusted per local SOPs.
Which of the following BEST describes when SARs are used?
Select one:
a. For working with particulate-producing tools
b. For emergency medical incidents
c. For assessing industrial accidents
d. For confined space rescues and technical rescue incidents
d.For confined space rescues and technical rescue incidents
Which of the following limitations of respiratory protection is caused by fogging in the facepiece?
Select one:
a. Decreased endurance
b. Low air cylinder pressure
c. Limited visibility
d. Decreased ability to communicate
c.Limited visibility
Which of the following BEST describes the frequency with which personal protective equipment (PPE) should be inspected?
Select one:
a. At the beginning of shift and after every use
b. As a firefighter feels there is need
c. As dictated by manufacturers
d. When there is down time at the fire station
a.At the beginning of shift and after every use
Structural fire fighting protective clothing must meet what NFPA® standard?
Select one:
a. 1971
b. 1982
c. 1977
d. 1500
a.1971
Where might a firefighter find wear due to friction during a routine personal protective equipment (PPE) inspection?
Select one:
a. Where SCBA contacts the protective coat
b. Along the path of a zipper
c. Under arms, in crotch, at knee and elbow joints
d. Where SCBA facepiece and mask connect
c.Under arms, in crotch, at knee and elbow joints
What part of structural fire fighting personal protective equipment (PPE) is worn when noise exceeds maximum noise exposure levels?
Select one:
a. Protective hoods
b. Personal alert safety systems
c. Protective coats
d. Hearing protection devices
d.Hearing protection devices
Which part of the facepiece assembly is made of clear safety plastic and mounted in a flexible rubber frame?
Select one:
a. Nose cup
b. Facepiece frame
c. Exhalation valve
d. Speaking diaphragm
b.Facepiece frame
What type of NFPA® defined cleaning may be done in a washing machine designed to handle heavy loads?
Select one:
a. Advanced cleaning
b. Contract cleaning
c. Routine cleaning
d. Specialized cleaning
a.Advanced cleaning
Which of the following APR effectiveness clues is monitored by being aware of how labored a firefighter’s breathing is?
Select one:
a. Resistance-to-breathing-indicators
b. Time
c. Weight
d. Taste and smell
a.Resistance-to-breathing-indicators
Which of the following is an emergency exit indicator?
Select one:
a. Necessary to replace air cylinder
b. Assignment completed
c. Situation is stabilized
d. SCBA failure
d.SCBA failure
What part of structural fire fighting personal protective equipment (PPE) must be high enough to protect the lower leg?
Select one:
a. Protective footwear
b. Protective coats
c. Protective trousers
d. Protective hoods
a.Protective footwear
Which nonemergency exit technique should be practiced in training until it is second nature?
Select one:
a. Buddy system
b. Accountability systems
c. Egress paths
d. Controlled breathing
d.Controlled breathing
Which of the following BEST describes a design limitation of structural fire fighting personal protective equipment (PPE)?
Select one:
a. Keeps coat sleeves from riding up
b. Provides protection from hot water
c. Prevents heat transfer away from body
d. Covers all portions of skin when moving
c.Prevents heat transfer away from body
Which of the following is a nonemergency exit indicator?
Select one:
a. Situation is stabilized
b. Activation of SCBA low-pressure
c. Presence of APR/PAPR breakthrough symptoms
d. Changes in oxygen level
a.Situation is stabilized
Which of the following BEST describes the purpose of personal protective equipment (PPE)?
Select one:
a. Designed to isolate firefighters during incident
b. Designed to eliminate injuries
c. Designed to minimize risk of injury or fatality
d. Designed to minimize discomfort while at incident
c.Designed to minimize risk of injury or fatality
Which of the following BEST describes SCBA safety precautions to take in an IDLH atmosphere?
Select one:
a. Check air supply when there is down time
b. Work in teams of two or more
c. Exit IDLH atmosphere after low air alarm activates
d. Remove SCBA if atmosphere appears safe
b.Work in teams of two or more
Which piece of protective breathing apparatus has the frame checked weekly for deterioration, dirt, and cracks?
Select one:
a. Hoses
b. Backplate and harness assembly
c. Facepiece
d. Breathing air cylinder assembly
c.Facepiece
Which of the following respiratory hazards can be protected against using high-efficiency particulate (HEPA) filters?
Select one:
a. Oxygen levels
b. Gases and vapors
c. Airborne pathogens
d. Elevated temperatures
c.Airborne pathogens
What is the minimum overlap between coat and trousers when the wearer is bent over to a 90 degree angle?
Select one:
a. 2 inches (50 mm)
b. 6 inches (152 mm)
c. 3 inches (76 mm)
d. 5 inches (127 mm)
a.2 inches (50 mm)
What part of structural fire fighting personal protective equipment (PPE) is useful in total darkness and confined spaces?
Select one:
a. Protective coats
b. Eye protection devices
c. Personal alert safety systems
d. Hearing protection devices
c.Personal alert safety systems
Which of the following BEST describes when an SCBA cylinder needs to be replaced?
Select one:
a. After first use of cylinder
b. While performing short-term work in emergency operations
c. When the cylinder becomes completely empty
d. During inspection if cylinder contains less than 90% of capacity
d.During inspection if cylinder contains less than 90% of capacity
Which of the following types of special protective clothing is designed as similar to structural personal protective equipment (PPE) but with an aluminized outer shell?
Select one:
a. Technical rescue
b. Ice rescue
c. Hazardous materials
d. Proximity fire fighting
d.Proximity fire fighting
Exposure to weather and physical hazards is a potential disadvantage for what type of SCBA mount?
Select one:
a. Unmounted
b. Seat mount
c. Backup mount
d. Rear external mount
d.Rear external mount