Chapter 5 Flashcards
Describe 100BaseT4.
Used CAT 3 cable
Describe 100BaseTX.
used CAT 5 cable
- dominant 100Mbps ethernet standard “fast ethernet”
- 100m between hub and node
Describe 100BaseFX.
- 100Mbps using fiber optic
- SC and ST connectors
- max 2km
Describe 1000BaseT
uses four-pair utp/stp max length 100
What is IEEE 802.3ab
most widely implemented 1000BaseT standard.
What is IEEE 802.3z?
Contained the 1000Base X standards CX, SX, LX
Describe 1000BaseCX.
- uses twinaxial cable
- 150 ohm, cable length of 25 meters.
Describe 1000BaseSX
- multimode
- 220m - 500m cable length
- 850 nm LED
- commonly use LC connectors
Describe 1000BaseLX.
- single mode (laser) cables
- make 5km; with repeaters 70 km
What is SFF?
Small form factor connectors.
- MTRJ: Mechanical Transfer Registered Jack
- Local connector(LC)
What is GBIC?
- Gigabit interface converter.
- modlar port; can pull out RJ-45 port replace with SC
Describe 10 Gigabit ethernet.
-has some fiber standards and two copper standards.
-Format of 10GBasexy
-“x” is the type of fiber usually
“y” is either “r” for lan based signaling or “W” for Sonet/Wan based signalling.
Describe 10GBaseSY
- multimode, 850nm, max length 300m
- SR = LAN; SW-SONET/WAN
Describe 10GBaseLY
-longwave(1310nm) single mode max 10km
Describe 10GbaseEY
-extra longwave(1550nm), single mode, max length 40km