Chapter 4 Self Test

Question 0

(416) 2. What piece of equipment provides message entry and delivery in the strategic automated command and control system (SACCS) system?

Answer 0

The SACCS desktop terminal (SDT)

Question 1

(416) 1. What is strategic automated command and control system (SACCS) the primary medium for?

Answer 1

Transmitting and receiving secure EAMs, force direction messages, and routine message traffic.

Question 2

(417) 1. Which system refers to the SIN system?

Answer 2

The missile control communications systems (MCCS)

Question 3

(417) 2. Which dial line is dedicated to the LCC and is used only by the MCCM?

Answer 3

Dial Line 1

Question 4

(417) 3. What system can be used as a backup for the SIN system?

Answer 4

Hardened voice channel (HVC)

Question 5

(417) 4. Which voice network is used for communications between the SCP and ACP within the missile wing?

Answer 5

EWO-2

Question 6

(418) 1. What REACT console equipment enables the operator to switch between the WSP and rapid message processor (RMP)?

Answer 6

A toggle switch on each of the keyboards

Question 7

(418) 2. What are the three operational computer programs that control the major functions of the rapid message processor (RMP)?

Answer 7

Communications integrator (CI), transmissions integrator, message processor

Question 8

(419) 1. Which system is designed to operate during nuclear conditions and EMP events?

Answer 8

Extra high frequency military strategic and tactical relay (EHF MILSTAR)

Question 9

(419) 2. The A1 drawer, AC/DC converter, is used to transform 120 VAC, 400-Hz into what?

Answer 9

285 VDC, 400-watt power for use by EHF SSA and antenna

Question 10

(420) 1. How are MCCM alerted to incoming EAM messages?

Answer 10

By audible and visual signaling devices

Question 11

(420) 2. During which mode of operation is the input switched from the system antenna to a dummy load?

Answer 11

Test mode

Question 12

(421) 1. The VLF radio control assembly allows the operator to choose up to how many primary operating channels?

Answer 12

Five

Question 13

(421) 2. What is the frequency range of the VLF/LF receiver?

Answer 13

14 to 60kHz, tunable in 10 Hz steps

Question 14

(421) 3. Which component is used for VLF/LF startup, configuration changes, and maintenance?

Answer 14

Local control device module

Question 15

(422) 1. Which component has an RF filter that is tuned to a selected frequency range that allows desired signals and rejects all others?

Answer 15

Radio receiver-transmitter

Question 16

(422) 2. How are channel-code-to-frequency-code conversions selected in the electronic frequency converter?

Answer 16

By manual selection, using the 20 thumbwheel switch groups

Question 17

(422) 3. How long is the actual radiating element of the UHF antenna?

Answer 17

12-inches