Chapter 38 | EMS Operations Flashcards
• Phases of an ambulance call • Preparation for a call • Operating an ambulance • Transferring and transporting the patient • Transferring the patient to the emergency department staff • Terminating the call, replacing and exchanging equipment, and cleaning and disinfecting the unit and equipment • When and how to use air rescue
List:
EMS system functions
5 points
- emergency
- non-emergency
- wilderness
- special event
- tactical
Define:
Type 1 ambulance
ambulance box mounted on truck chassis
Identify:
Type 1 ambulance
(ambulance box mounted on truck chassis)
Define:
Type 2 ambulance
vanbulance
Identify:
Type 2 ambulance
(vanbulance)
Define:
Type 3 ambulance
ambulance box mounted on van chassis
Identify:
Type 3 ambulance
(ambulance box mounted on van chassis)
List:
start of shift checklist
4 points
- check truck
- check equipment
- get radio
- check in with dispatch or crew chief
Define:
EMD
(abbreviation)
emergency medical dispatcher
Define:
emergency medical dispatcher (EMD)
911 dispatcher who interrogates caller and assigns call priority
Fill in the blanks:
A “hot” response means [BLANK].
A “cold” response means [BLANK].
A “hot” response means using lights and siren.
A “cold” response means no lights or siren.
Fill in the blanks:
Hot responses [INCREASE/DECREASE] risk.
Cold responses [INCREASE/DECREASE] risk.
Hot responses increase risk.
Cold responses decrease risk.
Fill in the blanks:
The laws in most states allow the driver of an emergency vehicle running [HOT/COLD] to break some vehicle and traffic laws.
However, it must be done with [BLANK].
The laws in most states allow the driver of an emergency vehicle running “hot” to break some vehicle and traffic laws.
However, it must be done with due regard for safety.
List:
operational reasons for helicopter transport
3 points
- speeding up transport to distant special facility
- prolonged extrication time (allowing helicopter to speed up transport)
- remote location only accessible by helicopter
Describe:
medical reason for helicopter transport
patients with high-priority for rapid transport
shock, GCS < 10, TBI/AMS, chest trauma/penetration, serious MOI, etc.
Define:
LZ
(abbreviation)
landing zone
Fill in the blanks:
A helicopter requires a landing zone of approximately [BLANK] feet by [BLANK] feet.
(easy way to measure it)
A helicopter requires a landing zone of approximately 100 feet by 100 feet.
(approximately 30 large steps on each side)
Fill in the blanks:
The ground slope for a helicopter landing zone should not exceed [BLANK].
The ground slope for a helicopter landing zone should not exceed 8º.
Fill in the blank:
The landing zone and approach/departure path should be clear of [BLANK].
The landing zone and approach/departure path should be clear of wires, towers, vehicles, people, and loose objects.
Make sure there’s not stuff in the way. It’s not that hard.
True or false:
The landing zone should be marked with one extra flare in an upwind position.
true
True or false:
The landing zone should be marked with one extra flare in a downwind position.
false
should be in upwind position.
Fill in the blank:
During helicopter night operations, [DO/DON’T] shine a light into the pilot’s eyes during landing or takeoff, or while the aircraft is running on the ground.
During helicopter night operations, literally never shine a light into the pilot’s eyes during landing or takeoff, or while the aircraft is running on the ground.
List:
considerations in describing landing zone to air rescue service
4 points
- terrain
- major landmarks
- estimated distance to nearest town
- other pertinent information
True or false:
Do not approach a helicopter unless escorted by the flight personnel.
true
True or false:
You may approach a helicopter once it has landed on the ground to proceed with patient transport.
false
do not approach a helicopter unless escorted by the flight personnel