Chapter 11 Flashcards
Cooling Systems for the interior Building Environment
In managing multiple types of properties, Gus has used various refrigerants. But the most common refrigerants are members of the ______ family.
a. water
b. ammonia
c. carbon dioxide
d. fluorocarbon
d. fluorocarbon
Whle their properties make ______ ideal as refrigerants, the stability of these compounds with their chlorine content has linked them to depletion of the earths’s protective ozone layer.
CFC’s
Since Susan is new to facilities management, her supervisor, Dave, explains that a ______ is a device used to transfer heat between either the interior or exterior air and the refrigerant.
Heat exchange
Earl correctly notes to his coworker Louise that in the refrigeration system, a(n) ______ regulates the flow of the refrigerant.
Metering device
Amy is aware that the cooling capacity of a refrigeration system is determined by the:
the rate of evaporation of the refrigerant
If property manager Ed is lookin for a water chiller-type compressor that is simple to operate, with minimal moving parts, he should select a _______ compressor.
a. centrifugal
b. reciprocating
c. rotary
d. helical screw
a. centrifugal
As a seasoned facilities manager, Casey has installed and repaired ______ condensers for many years. He is able to assert that such condensers with blow-through fans use more energy, but are more easily maintained than those withdraw-through fans.
a. air-cooled
b. air-heated
c. evaporative
d. water-cooled
c. evaporative
Property manager Yolanda knows that _______ cooling towers provide constatnt air-flow with fans, instead of being dependent on the wind and favorable weather conditions.
a. mechanical draft
b. natural draft
c. manufactured current
d. drift current
A. Mechanical-draft
A _______ evaporator is the best choice for a walk-in cooler where space temperature will be held well above freezing.
Finned-tube evaporator
A building manager for a smaller commercial property in southern area of North America would most likely select a ______________ heat pump, as they are the cheapest to install and are generally used where average temperatures do not fall below 17 degrees F.
a. air-to-air
b. air-to- water
c. wate-to-air
d. . water to water
d. water to water
Pat asks her coworker Wayne what type of refrigerant is used in an absorption refrigeration system. He replies:
a. a refrigerant blend
b. ammonia
c. water
d. HCFC’s
a. refrigerant blend