Casting and Splinting Flashcards

1
Q

Is a plaster or fiberglass cast easier to mold to the extremity?

A

Plaster

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

Is a plaster or fiberglass cast messier to apply?

A

Plaster

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

Which is hotter as it is curing, a plaster or fiberglass cast?

A

Plaster

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

What is the risk (temperature related) associated with a plaster cast?

A
  1. Exothermic reaction- (USE COOL WATER)

2. Potential burn risk in patients with sensory deficit, cognitive impairment, children

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

Which is heavier, a plaster or fiberglass cast?

A

Plaster

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

Which is more durable, a plaster or fiberglass cast?

A
  1. Fiberglass

2. Plaster, Once hardened, will soften and crack when it gets wet

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

What is the advantage of plaster casts in underlying wound drainage?

A
  1. “Wicks” underlying wound drainage

2. desirable in trauma and postoperative settings

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

What temperature of water should be used with a fiberglass cast?

A

Exothermic reaction but smaller so than plaster (USE COOL TO LUKE WARM WATER)

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

What are the advantages to a fiberglass cast?

A
  1. Light weight with excellent durability
  2. Once hardened, water-resistant, but underlying cast padding is not
  3. Available in many colors
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

What are the disadvantages to a fiberglass cast?

A
  1. Expensive
  2. Need to wear gloves when applying
  3. When exposed to air, it begins to cure
    A. cannot open package until ready to use
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

What are the indications for casts and splints?

A
  1. Treat simple, acute, nondisplaced fractures
  2. Treat soft tissue injuries, such as severe ligament sprains and muscle strains
  3. Immobilize a dislocation after it has been reduced
  4. Treat some congenital deformities, i.e. clubfoot
  5. Help manage chronic foot and ankle ulcers and Charcot foot
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

What are the contraindications for circumferential casts?

A
  1. During acute injury phase (usually 3-4 days), when acute swelling of the extremity is expected
  2. When cast would cover or conceal a known skin or soft tissue infection (sometimes, a “cast window” is made)
  3. When the cast would cover an open wound, where infection may occur (“cast window” possibly)
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

What are the potential complications of circumferential casting?

A
  1. Compartment syndrome
  2. DVT
  3. Cast dermatitis
  4. Pressure sores
  5. Nerve injuries
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

How can compartment syndrome be prevented?

A

Prevent by “bivalving” the cast

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

Why are DVTs a risk during splinting?

A
  1. Lack of ambulation and immobilization
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

Why is cast dermatitis a risk during splinting?

A

Decreased air circulation and moisture trapped

17
Q

Why are pressure sores a risk during splinting?

A

Caused by not padding bony prominences well or from finger indentations that occur from improper handling of a cast or splint during application (use palms to mold cast, not fingertips)

18
Q

Why are nerve injuries a risk during splinting? How can it be prevented?

A
  1. Pressure over superficial nerves, i.e. common peroneal nerve at fibular head, can cause nerve palsy
  2. Pad areas well
19
Q

What materials are needed to cast an extremity?

A
  1. Stockinette 2”, 3”, 4”, 5”, or 6”
  2. Cast padding (same sizes): Webril (cotton) or synthetic padding
  3. Cast material: plaster or fiberglass or Orthoglass
20
Q

What cast padding is used for the arm?

A

usually 2” or 3”

21
Q

What cast padding is used for the lower leg?

A

usually 3” or 4”

22
Q

What cast padding is used for the upper leg?

A

4” or 5”

23
Q

What is included in the evaluation after casting?

A
  1. Perform careful assessment of cast or splint before sending the patient away
  2. Make sure cast or splint extends to proper boundaries, but does not interfere with the range of motion of necessary joints
  3. Check for finger indentations or sharp edges. A. Can use cast saw or bandage scissors to trim back the cast and repad or recast if necessary
  4. Be sure to ask patient how the cast/splint feels
    A. It is feels too tight to the patient, reassess it
24
Q

How is a cast removed with an oscillating saw?

A
  1. Blade vibrates instead of spinning
  2. Does not cut the skin usually
  3. Keep in mind, blade gets hot, if skin is touched after breaking through cast, can burn patient
  4. Press saw blade firmly against cast at 90 degree angle until you feel it break through cast shell. Use vertical “in and out” motion adjacently
  5. Cut cast on both sides, use cast spreader, then use scissors to cut cast padding and stockinette
25
Q

What are the indications for a volar wrist splint?

A
  1. wrist sprain
  2. distal radius fracture
  3. Lacerations
  4. night splints
  5. Carpal tunnel
26
Q

What are the indications for an ulnar gutter/boxer splint?

A
  1. immobilize boxer fx
    A. 5th metacarpal fx
    B. 4th metacarpal fx
27
Q

What are the indications for a posterior leg splint and stirrup (U) splint?

A
Ankle must be neutral
90 degrees of flexion!
1. Distal tib/fib fx
2. Ankle sprains
3. Achilles tendon tears
4. Metatarsal fx
28
Q

What are the indications for a finger trap?

A
  1. For closed reduction of displaced Colles’ or Smith frx

2. Hematoma block performed first

29
Q

What are the indications for a sugar tong splint?

A
  1. displaced Colles’ fracture

2. Ulnar/radial shaft fractures

30
Q

What are the indications for a thumb spica splint?

A
  1. suspect scaphoid fracture or UCL tear (gamekeeper’s thumb), splint, and refer to ORTHO
31
Q

What are the indications for a alumafoam splint?

A
  1. Initial immobilization of mallet finger

2. : Proximal phalanx fracture, metacarpal neck fracture index finger, post finger reduction for finger dislocation

32
Q

What are the indications for a stack (stax) splint?

A

Mallet finger

33
Q

What pt instructions/education needs to be performed?

A
  1. Swelling in first 48 hrs is normal and may cause the casted arm or leg to feel tight
    A. Severe pain, numbness/tingling pt should call you and be seen to assess
  2. Elevate extremity above heart level to reduce swelling
  3. Move fingers (or toes) frequently for first 72 hrs, then several times a day
  4. Call if increased pain that is not relieved by rest, elevation and pain meds.
    A. Feeling of numbness/tingling and tightness does not go away after elevating it for 30 mins
    B. Unable to wiggle or move the fingers/toes
    C. Fingers or toes are cold or turn purple or white
    D. The cast becomes damaged, wet or cracked
34
Q

What is included in cast care?

A
  1. Keep cast clean and dry unless waterproof cast
  2. Do not pull out padding from splint or cast
  3. If cast causes an itch, try blowing COOL air from a hair dryer into the cast
  4. Never pour baby powder, lotion or oils into cast
  5. Do NOT try to reach the itch w/ a long object, such as a pencil or hanger
  6. No running or jumping or playing sports
35
Q

What is the procedure for applying a posterior ankle splint?

A
  1. Measure from 2 inches below the popliteal to 2 inches beyond the toes. Prepare splint as directed and roll twice in a towel
  2. Fold the splint under 1 inch at the toes to make a reinforcing toe plate. PLace the splint under the foot, extending slightly beyond the toes and wrap as follows: start at the toes, work up the foot, skip the ankle, and wrap behind the achilles
  3. Below the malleolus, overlap the corners of the splint. Do not push in and cause a pressure point
  4. Wrap the heel and continue wrapping the rest of the leg. Mold and position as prescribe by the dr. To hold the position, wrap splint with a figure 8 position
  5. Recommended width: 4”-5” for most pts
36
Q

What is the procedure for placing a boxer splint?

A
  1. Measure from the tip of the 5th figner to 2 inches from the antecubital. Prepare splint as directed.
  2. Place padding between the 4th and 5th figners
  3. Apply the splint to the ulnar side of the hand, creating a gutter
  4. Wrap the elastic bandage to secure the splint. Mold and position as prescribed.
37
Q

What are the procedures for volar splints?

A
  1. Measure from 1 inch above the palmar crease to 2 inches form the antecubital. Prepare splint as directed
  2. Fold one edge of the splint over one inch. Place fold at the angle of the palmar crease (follow the life line)
  3. Wrap with elastic bandage to secure the splint. Mold and position as prescribe
38
Q

What is the procedure for a sugar tong splint?

A
  1. Measure from behind the elbow coming up both sides of the arm to the tips of the fingers
  2. Fold the splint in half. Cut across the splint at the fold leaving approximately 1/2 inch attached. Pad the edges with tape. Prepare splint as directed
  3. Place the splint on the pt’s arm by sliding the cut section over the fingers, with the attached section in the web spaces, between the thumb and forefinger
  4. Wrap the elastic bandage to secure the splint. At the elbow, fold one side of the excess material behind the elbow and over lap with the other side. Lock in place with a series of figure-8 wrap