Cable Splicing Safety Flashcards

1
Q

The national safety organization that makes labor laws and safety regulations is known by the initials ? .

A

OSHA

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

Rubber gloves shall be worn continuously while working on any structure carrying live conductors. This is known as the ? rule.

A

Ground to Ground

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

Rubber gloves shall be worn when a vault or cabinet with a live cable is opened and shall be worn continuously until the vault or cabinet is locked. This is known as the ? rule

A

Lock to lock

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

Rubber gloves are available in class ratings. The color code for Class 2 rubber gloves is a(n) ? label, and their maximum voltage rating is ? .

A

Yellow 17kv AC

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

Color Code for Class 3 Rubber Gloves and Rating

A

Green 26.5kv

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

Color Code for Class 1 Rubber Gloves and rating?

A

White 7.5kv

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

Color Code for Class 4 Rubber Gloves and rating?

A

Orange 36kv

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

Power line workers wear Class E (electrical) hard hats. When new and clean, they are electrically test rated for ? .

A

20kv

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

Eye protection should be worn at all times while on a cable splicing job.

A

True

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

The employer is required to provide a(n) ? for all chemicals used in the workplace

A

MSDS

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

A typical manhole is considered a(n) ? space.

A

Enclosed space

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

A confined space requires an ?.

A

An entry permit

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

What 3 characteristics determines a confined space?

A
  1. Limited or restricted means for entry or exit
  2. Not designed for continuous occupancy
  3. Large enough for a person to enter and perform work
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

An enclosed space is similar to a confined space but..

A

Designed for frequent or routine entry

Does not contain hazards that would make it permit required confined space.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

When working in the heat, to avoid heat stress, Qualified Electrical Workers should wear light, loose-fitting, and breathable clothing made of ? , unless they are required to wear FR clothing.

A

Cotton

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

When working in the heat, eating smaller meals and avoiding ? and sugar helps to prevent heat emergencies.

17
Q

When working in the cold, Qualified Electrical Workers should frequently check their coworker’s faces for signs of ? .

18
Q

A rule of thumb for setting up an extension ladder to a proper angle is to set the horizontal distance of the foot of the ladder out ? of the working length.

A

25% to 1/4

19
Q

Although a circuit is physically isolated from all sources of power, it is possible for it to remain energized or to become charged.

20
Q

Protection from electric shock caused by induced charges can be provided by ? .

A

bonding all the conducting parts in the work area with a low resistance metallic conductor

21
Q

Equipotential bonding is recognized as the safest method of performing work on high voltage conductors and equipment.

22
Q

There are ? general entry procedures that must be followed when entering an enclosed space such as a manhole.

23
Q

What are the 4 general entry procedures?

A

Atmosphere Testing
Ventilation
Attendant/Communication
PPE/Authorization

24
Q

One of the general entry procedures for a confined space is to check for gas. The gas test is to detect for combustible gases and ? .

A

Oxygen Deficiency

25
Before entering a confined space, it should be ventilated for a minimum of ? .
5 minutes
26
A cable splicer will use propane gas for numerous jobs, such as installing heat shrink splices and terminations. The cylinder (tank) should be laid on its side while in use.
False
27
The most common type of injuries that occur during the preparation of shielded power cables
is a cut or tear/puncture of the skin
28
The “test point” on a loadbreak or deadbreak elbow makes a low-impedance to the elbow’s conductor.
False
29
What is the acceptable oxygen range?
19.5% to 23.5%