BME Flashcards
Which standard brief does the arriving aircrew provide JTAC?
CAS Check-in
What brevity was used to acknowledge sighting of a specified reference point?
CONTACT
Brevity used to acknowledge sighting a non-friendly aircraft or enemy?
TALLY
Authenticate BDJ on an AKAC 1553
November
Why do ground units use VDL?
To provide SA for execution
Which is not an example of an airspace control measure?
Fire Support Coord. Line (FSCL)
Who develops airspace control policies and coordinates and integrates airspace use under JFC authority?
Airspace Control Authority (ACA)
Who do you contact to transit from one piece of airspace to another?
CRC
What is a temporary corridor of defined dimensions recommended for use by fixed wing ac that presents the minimum known hazards, max risk two low-flying ac transiting in a combat zone?
Min Risk Route (MRR)
What keypad is the example target located in?
300 AC 4 5
What is the goal of CBEAR Communicate?
Determine intent
In CBEAR Build, what is the desired range and look angle determined by?
Sensor game plan
What search type is passed as a singular location via LAT/LONG, MGRS, Bullseye?
Point
What must be complete for the CBEAR Execute phase to begin?
Game plan development
Which step of F2T2EA process decides to strike and selects means to attack a target?
Target
What maneuver should be flown with a steep look angle and audible detection is not a concern?
Close pass
Which is false regarding Integrated Air Defense System (IADS)?
Most operate independently of threat capabilities
SA 7, 9, 14 are examples of what kind of Surface-to-Air threat?
IR guided
What are the possible methods to counteract a known threat?
Avoid, disrupt, destroy
What does RPA mean in regard to a threat?
Record
Plot
Assess
What should be accomplished in order to start a visual talk on?
Establish a common reference point
What should you do after the completion of every talk on?
Confirmatory comms
At the beginning of a talk on, a ___ should be defined
STAKE
When conducting LST Talk on, what info should be included for the ac to STARE?
PRF & reference point coordinates
What is a LTM called outside of the RPA community?
IR pointer
When positioning the ac for a buddy lase and passing the coordination brief whether it be FROTIES or the TOC’s, what do you need to ensure?
Buddy has correct PRF
What is the optimal seeker acquisition area for a buddy lase off of a ground designator’s laser to target line?
10-45 degrees
At or below what altitude is considered low altitude maneuvering ops?
5000’ or below
During all low altitude flights, what is the minimum distance aircrew ensures the ac remains away from any factors of terrain?
1 NM
What is the minimum visibility via MTS camera for low level training and more?
5 NM