ATC Flashcards
What are the lateral and vertical limits of Pearce CIRA?
5nm / 3,500ft
What are the lateral and vertical limits of GINGIN CIRA?
5nm / 3,500ft AMSL
Runway length and width for 18L/36R?
8002’ x 148’
Runway length and width for 18R/36L?
5712’ x 98’
Runway length and width for 05/23?
5548’ x 148’
Runway length and width for 08/26 (YGIG)?
5997’ x 148’
CTAF procedures are used within ___nm, up to and including ___ft above aerodrome elevation, unless otherwise specified. The use of radios is not mandatory, however when flying radio-equipped aircraft, pilots are required to make broadcasts.
5nm, 3500ft
Which taxiway is the narrowest and what is the width?
Taxiway ECHO, with a width of 30ft.
Parallel lane ops are ceased during T/O of all non-local A/C from the adjacent runway / Main Runway. (True/False)
TRUE
Parallel lane ops are to cease for the landing of all non-local aircraft, but can commence once the aircraft has landed and initiated deceleration on the adjacent runway. (True/False)
TRUE
What is the magnetic runway heading of Runway 18L/36R?
175 degrees / 355 degrees
What is the magnetic runway heading of Runway 05/23?
046 degrees / 226 degrees
What is the magnetic runway heading of Runway 08/26?
076 degrees / 256 degrees
Max number of A/C allowed to conduct continuous circuits in YPEA in the day?
6 A/C
What is the landing separation required in the day between PC-21 and Hawk? (Magic number)
3,000ft
Define “Prohibited” , “Restricted” and “Danger” areas.
“Prohibited”
No flights allowed. Flight within a prohibited is not allowed.
“Restricted”
Airspace is restricted in accordance with specified time. Pilot desiring to enter must request clearance from ATC to enter. When clearance is granted, pilot must abide by all rules.
“Danger”
Airspace within which dangerous activities to aircraft may exist at specified times. Approval of flight within a danger area outside controlled airspace is not required.
What is the vertical limits of R179 (Muchea Range)
NOTAM
What is the vertical limits of D197?
SFC - 1500ft AMSL
What is the vertical limits of Merlo Release?
SFC - 4000ft
What are the vertical limits of Gnangara Release?
SFC - 1000ft
or
SFC - 1500ft (On Request)
What Class airspace do we mostly operate in?
Class D
What are some Class G airspaces that we may operate in?
- Gingin (Unmanned)
2. OLFA (Vertically below area Bravo/Charlie)
What are the weight categories for the purpose of wake turbulence separation?
A. Heavy 136000kg / 300000lbs<
B. Medium 7000kg - 136000kg
C. Light 7000kg> (PC-21)
Which aircraft performance category does PC-21 come under?
PC-21 Falls under:
CAT B. Speeds from 91kts - 120kts
There are a total of 5 Cats (A-E)
