Airframe

Question 1

Aircraft Dimensions

Answer 1

60 Feet Long
45 Feet Wide
15 Feet High

Question 2

Aircraft turning radius

Answer 2

60° @2kts

24° if malfunctioned holding (MSW)

Question 3

Aircraft Danger Zones

Answer 3

Front: Radar 2’
Pylon intake: 35’
Pylon exhaust 240’

Question 4

Entry & Aft (exit) door pins

Answer 4

Entry:
8 on top
4 on bottom
Aft(exit):
8 total

Question 5

Entry and Aft Cab Door (Steady Red) Annunciation

Answer 5

Door handles open or unlatched

Question 6

Entry and Aft Cab Doors (Flashing Red) Annunciation

Answer 6

One or more microswitches not engaged

Rear Key lock engaged

Question 7

EXT Doors (Steady Red) annunciation

Answer 7

One or more micro switches not closed

Latch could be open

Question 8

7 Triangle strips on Leading Edge

Purpose and how many needed

Answer 8

Performance during low speed regime

Need all to fly.

Question 9

Round headed screws along aft leading edge of wing

Purpose and how many can be missing

Answer 9

Dual purpose: attaching leading edge section to the wing and act as BLEs at high angles of attack.

Must not be missing any

Question 10

Full Chord Wing fences

Answer 10

Channel airflow over over ailerons at high angles of attack

Question 11

Boundary Layer Energizers (BLEs)

Purpose and how many

Answer 11

Delay airflow separation at higher Mach numbers preventing unwanted aileron activity near operating limits.

Two rows of 10 on each wing

Question 12

Delta Fins

Purpose

Answer 12

Improves deep stall characteristics
Helps with Mach tuck
Landing performance (ground effect)
Damps out Dutch Roll

Question 13

Static Discharge Wicks

Total configuration and how many missing for release

Answer 13

19 Wicks
(4 per wing)(2 per delta fin)(3 each elevator)(1 tail nav light housing)
5 can be missing
One from each wing
One from each elevator(inboard)
One from tail nav light housing

Question 14

Baggage cargo limit

Aft Cabin and Aft Cargo hold

Answer 14

Aft Cabin (200lbs)
Aft Cargo hold (300lbs)