ADIRS Flashcards
Amber FAULT on IR 1 (2) (3)
Steady?
Flashing?
Steady: The respective IR is lost
Flashing: The heading and attitude information may be recovered in ATT mode
Steady White ALIGN on IR 1 (2) (3)
The respective IR is operating normally in align mode
Flashing White ALIGN on IR 1 (2) (3)
- IR alignment fault
- No present position entry after 10 minutes
- Difference of 1 degree latitude or longitude between position at shutdown and entered position
Extinguished ALIGN on IR 1 (2) (3)
Alignment has been completed
NAV on IR (1/2/3) Mode Rotary selector
Normal mode, supplies full intertial data
ATT on IR (1/2/3) Mode Rotarty Selector
- IR supplying ONLY attitude and heading information
- Heading must be entered through CDU every 10 minutes minimum
What does the Air Data Reference ADR or the ADIRU supply?
BOATS
Barometric Altitude
Overspeed protection
Angle of Attack
Temperature
Speed and Mach
What does the Inertial Reference IR part of ADIRU provide?
Flight path vector
Aircraft position
Track
Heading
Altitude
Acceleration
Ground speed
Amber FAULT on ADR (1/2/3) P/B switch?
Fault is detected in the Air Data Reference part
ELAC (1/2) performs what in ON?
NADAAA
NADAAA
Normal Pitch
Alternate Pitch
Direct Pitch and Roll
Abnormal Attitude
Aileron Droop
Acquisition of Autopilot orders
ELAC (1/2) Amber FAULT
- When failure is detected
- During power-up test (8 Seconds)
- Has associated ECAM message*
Spoiler & Elevator Computers SEC (1/2/3) What are thier purpose?
- Spoiler control
- Standby elevator and stabilizer control
Fligth Augmenation Computer FAC (1/2), what are thier purpose?
Electrical Rudder Control
SEC (1/2) ON performs the following?
NSA DDA
NSA DAA
Normal roll (contorlling spoilers)
Speedbrakes & Spoilers
Alternate Pitch (SEC 1 & 2 ONLY)
Direct Pitch (SEC 1 & 2 ONLY)
Direct Roll
Abormal attitude
SEC (1/2/3) Amber FAULT
- Failure is detected
- Associated ECAM message