449 Shipboard Fire/Incident

Question 1

The IC Should plan for intervals between entry teams to be no longer than

Answer 1

10 minutes

Question 2

The IC Should consider this need early in the event and contact ___ to develop a plan for the transport of equipment from apparatus to the pier, and from the pier to the deck of the vessel.
The ___ has vehicles that can be used to transport equipment to the pier and hoisting systems to transport the equipment from the pier to the deck

Answer 2

Fire 4

TRT

Question 3

International shore connection

This adapter looks like the flange, has bolts and washers for connection to the flange, and a ____ inch female connection. 

The maximum pressure for supplying the ISC is ____ psi at the flange

Answer 3

2 1/2

150 psi

Question 4

Depending on the size of the vessel, the fire control plan is likely to be found in one or all of the following areas

Answer 4

• outside the deck House in a marked, watertight container
• permanently mounted in an accessible area
• in the crews living area

Question 5

Enough foam must be on hand to substain a ___ minute application

Answer 5

65 minute

Question 6

Cooling boundaries are established by positioning hose lines in all ___ ( ) areas  directly affected by heat transfer, and cooling the borders of the compartment involved.

Answer 6

Six (6)

Question 7

Discuss all viable options for dewatering with the

Answer 7

Master of the vessel and Port representatives

Question 8

—— has a portable repeater that can be placed on the vessel and used for communications. JFRD moblie and portable radios must be set to ____ to transmit and receive using this repeater.

Answer 8

F8

C11

Question 9

If there is a USCG vessel on scene that is large enough, the chief should consider utilizing this vessel as the ___ ___. If there is a second USCG vessel on scene, they should be requested to function as a

Answer 9

Command post

Safety boat