3.200 CODE 3 DRIVING (EXCLUDING PURSUIT DRIVING) Flashcards
Code 3 driving is a police tactic used in responding to an emergency. ____________________, _____________, and _________ are important elements of a code 3 response that ensure officers are maximizing safety while minimizing risks.
Good judgment, communication, and coordination
Under what circumstances can Code 2: Non-Emergency – Lights Only, be used
- To stop violators (consideration shall be given for immediate activation of emergency lights).
- Upon arriving in an area where the use of the siren may signal suspects.
- To signal other motorists of traffic hazards when an officer is moving at a slow speed in traffic (e.g., pushing a stalled vehicle, moving at slow speed as a crime prevention tool, or making unusual movement on the roadway). Officers must drive at the speed limit or below.
- When approved by a sergeant or above during an authorized motorcade. Note: Officers responding to non-emergency calls will not use emergency lights and/or siren for the sole purpose of crossing intersections.
Authorization for Code 3 Response – Officers may respond Code 3 when:(4)
- Imminent danger to citizens and the officer’s arrival might save lives.
- Another officer requires assistance to control a volatile situation.
- Reliable information exists of a felony in progress.
- Pursuits – see Section 3.
Who determines the need for Code 3 Reponse?
Patrol Officers
Primary officer (or first officer to initiate Code 3 response) will:(4)
- Notify Communications via radio of Code 3 status.
- Activate and continuously utilize emergency lights and siren.
- Activate the Code 3 button on the mobile data terminal (MDT), if equipped with MDT.
- Proceed in a safe manner.
3.200 Code 3 Driving
A secondary officer will:(3)
- Notify Communications via radio of code 3 status.
- Activate the Code 3 button on the MDT, if equipped with MDT.
- Proceed in a safe manner.
First and second arriving units will:
- Broadcast arrival status via the radio.
- Determine the need for continued code 3 response of additional units.
- Advise other units via radio to either continue or discontinue code 3, as needed.
(3.200 Code 3 Driving)
Prior to proceeding code 3, Additional units will:
Prior to proceeding Code 3, activate the Code 3 button on the MDT, if equipped with MDT, to advise of Code 3 response and, subsequently, arrival status. Do not break Code Red on a radio channel.
Field supervisors will:
Monitor respective radio channels to ensure strict adherence to this policy and will cancel or direct code 3 responses, as warranted.