3: Paper & Board Finishes (+ lamination)

Question 1

Laminating (Paper & Board)

Answer 1

desktop laminator & sheet of paper is encapsulated by a polymer pouch

Question 2

Varnishing (Paper & Board)

Answer 2

Clear ink used to enhance colour & offer protection

Question 3

Hot Foil Blocking (Paper & Board)

Answer 3

heat & pressure applied to a metallic foil to create depth & texture

Question 4

Embossing (Paper & Board)

Answer 4

creates raised design on surface to give visual & tactile effect

Question 5

Lay-Up Lamination (CFRP & GRP) (5)

Answer 5

1. Prepare and coat the mould with a release agent.
2. Cut reinforcing fibres to size and coat in polyester resin
3. Layer the resined material onto the mould.
4. Apply pressure by using roller to compress layers and remove air.
5. Cure the resin and remove the laminate from the mould.

Question 6

Wood Lamination (wood veneers & thin manufactured boards) (3)

Answer 6

1. Wood has adhesive applied
2. wood is bent over a former in a mould
3. wood is clamped and left to dry