1506V Folding Quick- Don Mask(HC-130) Flashcards
Calendar inspection shall be performed how often
30 days
CGTO PG-85-00-310-A 5-9
Mask assemblies and operating procedures
- 5 sub assemblies
- no mods allowed
- disinfect with public places towelette- face piece
- clean the anti-smoke goggles with a warm solution of mild liquid detergent(ivory or lux) at a ratio of 1/2 teaspoon of detergent for each gallon of water.
What accessory parts are repairable
electrical components, soldering, or replacement of corroded or broken connectors
CGTO PG-85-00-310A P. 5-10
MPC 354010.1 p 5
Operational test
- apply external power
- O2 gauge reads 300-475 psi
- lever 2-on, lever 3-100% O2, lever 4-normal, indicator 5- blinks white with each breath, lever 4-emergency, breathe 3 cycles, indicator 5- should indicate continuos O2 flow, indicator 5 shows black with no breath, flow lever 4- normal, diluter lever 3- normal, flow lever 4- test mask.
Clean and disinfect mask
- facepiece- public places
- anti smoke goggles- warm solution of mild liquid detergent(ivory or lux) and water at a ratio of one half teaspoon of detergent for each gallon of water
- allow goggles and mask to air dry at room temp for 15-20 min
- apply anti-fog to inside of lens
MPC 354010.1 P. 7,8
Mask markers
mark pilot, co pilot, and flight engineer masks with ruby red reflective tape, 3/4 in from end of hose
MPC 354010.1 P. 8
Random Facts
43 lbs of force
use elastrator to install cable guides on the O2 hose
pull the dot fastener
KRYTOX 240 used to lubricate lens tongues
MPC?
What modifications to the mask are allowed
There are no modifications authorized
CGTO PG-85-00-310A P. 5-9
How do you store the mask
- wipe clean and store in it approved container to keep clean,
dry, and lint free - sanitize before storage
- do not expose to excessive heat or direct sunlight
- not stored where other flight gear will be stored on it
- apply dust cover
CGTO PG-85-00-310A P. 5-11
Which bottle is used with this mask
MA-1 emergency oxygen bottle
M13520.1C 5-22
How does the valve hose and communication assembly consisting of an inhalation/exhalation valve connect to the mask and hard shell assembly
By means of a 3 pin bayonet connector
M13520.1C 5-24
What is replaceable on the mask
The lens
M13520.1C 5-24
How many cycles do you breathe normally for the inspect
3 cycles
MPC 354010.0 P.6
What does the flow indicator blink with each breath
White
MPC 354010.1 P. 6
What does the flow indicator blink when no oxygen is flowing by momentarily holding breath
Black
MPC 354010.1 P. 6