10d. Casket Exteriors Flashcards
What kind of wood exterior is this:
Has no stain or protective varnish
Unfinished
What kind of wood exterior is this:
May be stained or unstained, with an outer protective coating of varnish or polyurethane
Natural Finish
What kind of wood exterior is this:
A color stain is applied
Stained
What kind of wood exterior is this:
Has no stain, may be covered with protective varnish
Unstained
Which type of finish is this:
A surface made smooth and glossy usually by friction
Brought to a highly developed, finished, or refined state: burnished
Polished (Gloss)
Which type of finish is this:
Low luster
Semi-Gloss
What type of finish is this:
A finish used on casket exteriors that is free of gloss
(Dull, lusterless surface, no shine or gloss)
Flat Finish (matte finish)
What type of finish is this:
Has less luster than semi-gloss
Satin
What type of finish is this:
The application of paint
Single or multicolored
Painted
What type of finish is this:
Made by uniting superimposed layers of different materials
Laminates
What type of finish is this:
Wood is covered with cloth
Cloth Covered
What type of cloth covering material is this:
- A twilled, napped, woolen or worsted fabric with a smooth lustrous face and dense texture
- A fabric usually made of cotton, silk, or rayon woven in a plain or rib weave with a soft semi gloss finish
Broadcloth
What type of cloth covering material is this:
- A heavy durable cotton fabric with a short (1/8th inch or less) thick, velvety nap on one side
- Woven cloth with a suede-like appearance with a nap of less than 1/8th inch
Doeskin (moleskin)
What type of cloth covering material is this:
- A woven cloth with a nap exceeding 1/8th inch (high pile)
Plush
What type of covering material is this:
Material has no raise surfaces
Smooth
What type of covering material is this:
To ornament with a raised work, to raise relief from surface, material having designs raised above the surface
Embossed
Which metal exterior is this:
The metal casket is first painted. Then scratched with an abrasive material to the base metal. And then finished with a sealer. Buffed until a smooth high gloss is obtained
Brushed